From mboxrd@z Thu Jan 1 00:00:00 1970 Content-Type: multipart/mixed; boundary="===============5453557639105930863==" MIME-Version: 1.0 From: Christopher Vogl Subject: Re: Telit HE910 initialisation sequence freezes Date: Fri, 06 Sep 2013 07:35:48 +0200 Message-ID: <522969B4.8050806@hale.at> In-Reply-To: List-Id: To: ofono@ofono.org --===============5453557639105930863== Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Hi Etienne, On 05/09/13 09:54, Etienne Mabille wrote: > Hi everyone, > > I am using the Telit HE910 modem with the "telit: rework for HE910" = > patches shared by Jonas Bonn on the 4th of april 2013. > > After some endurence testing I realize that sometimes (around 25% of = > the time) the initialisation process freezes after switching sim state = > satus to 2. > I assume that the driver then waits for a signal from the modem, but = > this signal never comes. > When this happens, the only way I found is to hard-reset the modem... > Is there a way to stimulate the modem in order to continue the = > initialisation sequence ? > > Thanks in advance, > > Etienne What's the firmware version of your modem? I noticed that behaviour with = firmware versions below 12.00.003. Regards, Christopher -- Scanned by MailScanner. --===============5453557639105930863==--