From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Sun, 08 Sep 2013 16:55:17 +0000 Subject: Re: [lm-sensors] Whats wrong with LM-Sensors Message-Id: <522CABF5.40500@roeck-us.net> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On 09/08/2013 09:33 AM, Tomas Larsson wrote: > lsmod sayas that they are loaded > > dmesg > i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ACPI: resource 0000:00:1f.3 [io 0x2000-0x201f] conflicts with ACPI region > SMB1 [io 0x2000-0x2016] > ACPI: If an ACPI driver is available for this device, you should use it > instead of the native driver > coretemp coretemp.0: Unable to read TjMax from CPU. > coretemp coretemp.0: Unable to read TjMax from CPU. > smsc47m1: Found SMSC LPC47M15x/LPC47M192/LPC47M997 > ACPI: resource smsc47m1 [io 0x0680-0x06ff] conflicts with ACPI region RTIO > [io 0x680-0x6ff] > ACPI: If an ACPI driver is available for this device, you should use it > instead of the native driver > You do see the answer above. You have an ACPI resource conflict. See http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31 Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors