From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Benedikt Spranger <b.spranger@linutronix.de>
Cc: netdev@vger.kernel.org,
Alexander Frank <Alexander.Frank@eberspaecher.com>,
Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
Holger Dengler <dengler@linutronix.de>,
"linux-can@vger.kernel.org" <linux-can@vger.kernel.org>
Subject: Re: [PATCH 04/16] c_can: fix receive buffer configuration
Date: Mon, 09 Sep 2013 12:51:04 +0200 [thread overview]
Message-ID: <522DA818.1020802@pengutronix.de> (raw)
In-Reply-To: <1378711513-2548-5-git-send-email-b.spranger@linutronix.de>
[-- Attachment #1: Type: text/plain, Size: 2132 bytes --]
On 09/09/2013 09:25 AM, Benedikt Spranger wrote:
> The former implementation lacks some initialization of receive buffer.
> First the maximal buffer length was 0. The Buffer direction was not set
> and the mask register a reserverd flag was cleared.
>
> Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
> ---
> drivers/net/can/c_can/c_can.c | 19 ++++++++++++++-----
> 1 file changed, 14 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
> index bdb7bcd..886163f 100644
> --- a/drivers/net/can/c_can/c_can.c
> +++ b/drivers/net/can/c_can/c_can.c
> @@ -116,6 +116,11 @@
> IF_COMM_CONTROL | IF_COMM_TXRQST | \
> IF_COMM_DATAA | IF_COMM_DATAB)
>
> +/* IFx mask */
> +#define IF_MASK_MXTD BIT(31)
> +#define IF_MASK_MDIR BIT(30)
> +#define IF_MASK_RES BIT(29)
> +
> /* IFx arbitration */
> #define IF_ARB_MSGVAL BIT(31)
> #define IF_ARB_MSGXTD BIT(30)
> @@ -653,11 +658,15 @@ static void c_can_configure_msg_objects(struct net_device *dev)
>
> /* setup receive message objects */
> for (i = C_CAN_MSG_OBJ_RX_FIRST; i < C_CAN_MSG_OBJ_RX_LAST; i++)
> - c_can_setup_receive_object(dev, 0, i, 0, 0,
> - (IF_MCONT_RXIE | IF_MCONT_UMASK) & ~IF_MCONT_EOB);
> -
> - c_can_setup_receive_object(dev, 0, C_CAN_MSG_OBJ_RX_LAST, 0, 0,
> - IF_MCONT_EOB | IF_MCONT_RXIE | IF_MCONT_UMASK);
> + c_can_setup_receive_object(dev, 0, i,
> + IF_MASK_MDIR | IF_MASK_RES, 0,
> + IF_MCONT_UMASK | IF_MCONT_RXIE |
> + IF_MCONT_DLC_MAX);
DLC_MAX should be added in this patch. not in 3.
> +
> + c_can_setup_receive_object(dev, 0, C_CAN_MSG_OBJ_RX_LAST,
> + IF_MASK_MDIR | IF_MASK_RES, 0,
> + IF_MCONT_UMASK | IF_MCONT_EOB |
> + IF_MCONT_RXIE | IF_MCONT_DLC_MAX);
> }
>
> /*
>
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 259 bytes --]
next prev parent reply other threads:[~2013-09-09 10:51 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-09 7:24 [PATCH 00/16] Support for Eberspächer Flexcard DCAN function Benedikt Spranger
2013-09-09 7:24 ` [PATCH 01/16] c_can_platform: add FlexCard D-CAN support Benedikt Spranger
2013-09-09 8:22 ` Marc Kleine-Budde
2013-09-09 8:22 ` Marc Kleine-Budde
2013-09-09 7:24 ` [PATCH 02/16] c_can: add generic D-CAN RAM initialization support Benedikt Spranger
2013-09-09 8:34 ` Marc Kleine-Budde
2013-09-09 7:25 ` [PATCH 03/16] c_can: simplify arbitration register handling Benedikt Spranger
2013-09-09 9:16 ` Marc Kleine-Budde
2013-09-09 9:16 ` Marc Kleine-Budde
2013-09-09 7:25 ` [PATCH 04/16] c_can: fix receive buffer configuration Benedikt Spranger
2013-09-09 10:51 ` Marc Kleine-Budde [this message]
2013-09-09 7:25 ` [PATCH 05/16] c_can: use 32 bit access for D_CAN Benedikt Spranger
2013-09-09 9:37 ` Marc Kleine-Budde
2013-09-09 7:25 ` [PATCH 06/16] c_can: consider set bittiming may fail Benedikt Spranger
2013-09-09 9:39 ` Marc Kleine-Budde
2013-09-09 9:39 ` Marc Kleine-Budde
2013-09-09 7:25 ` [PATCH 07/16] c_can: reconfigre message objects after leaving init state Benedikt Spranger
2013-09-09 7:25 ` [PATCH 08/16] c_can: Add FlexCard CAN TX fifo support Benedikt Spranger
2013-09-09 9:47 ` Marc Kleine-Budde
2013-09-09 7:25 ` [PATCH 09/16] c_can: expicit 32bit access on D_CAN to message buffer data register Benedikt Spranger
2013-09-09 11:20 ` Marc Kleine-Budde
2013-09-09 7:25 ` [PATCH 10/16] c_can: add 16bit align 32bit access functions Benedikt Spranger
2013-09-09 9:57 ` Marc Kleine-Budde
2013-09-09 7:25 ` [PATCH 11/16] c_can: stop netqueue if hardware is busy Benedikt Spranger
2013-09-09 10:05 ` Marc Kleine-Budde
2013-09-09 10:21 ` Marc Kleine-Budde
2013-09-09 7:25 ` [PATCH 12/16] c_can: Add flag to disable automatic retransmission of CAN frames Benedikt Spranger
2013-09-09 10:21 ` Marc Kleine-Budde
2013-09-09 10:34 ` Marc Kleine-Budde
2013-09-09 7:25 ` [PATCH 13/16] c_can: flexcard: add ioctl to reset FIFO message object Benedikt Spranger
2013-09-09 10:24 ` Marc Kleine-Budde
2013-09-09 7:25 ` [PATCH 14/16] flexcard: can: CAN local loopback using SKB pflags Benedikt Spranger
2013-09-09 7:25 ` [PATCH 15/16] flexcard: can: Configure CAN loopback packages (TXACK) Benedikt Spranger
2013-09-09 10:29 ` Marc Kleine-Budde
2013-09-09 7:25 ` [PATCH 16/16] c_can: fix TX packet accounting Benedikt Spranger
2013-09-09 10:31 ` Marc Kleine-Budde
2013-09-09 7:54 ` [PATCH 00/16] Support for Eberspächer Flexcard DCAN function Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=522DA818.1020802@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=Alexander.Frank@eberspaecher.com \
--cc=b.spranger@linutronix.de \
--cc=bigeasy@linutronix.de \
--cc=dengler@linutronix.de \
--cc=linux-can@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.