From: Paolo Bonzini <pbonzini@redhat.com>
To: famz@redhat.com
Cc: peter.maydell@linaro.org, mjt@tls.msk.ru, qemu-devel@nongnu.org,
stefanha@redhat.com, vilanova@ac.upc.edu, rth@twiddle.net
Subject: Re: [Qemu-devel] [RFC PATCH v3 1/5] make.rule: fix $(obj) to a real relative path
Date: Tue, 10 Sep 2013 09:58:02 +0200 [thread overview]
Message-ID: <522ED10A.1080107@redhat.com> (raw)
In-Reply-To: <20130910071611.GA21082@T430s.nay.redhat.com>
Il 10/09/2013 09:16, Fam Zheng ha scritto:
> The base point of unnesting is fixed to SRC_PATH:
>
> define unnest-dir
> ...
> $(eval include $(SRC_PATH)/$1/Makefile.objs)
> ...
> endef
>
> So it can't unnest "../". block-obj-y = ./ makes a little more sense, but
> $(obj) can be messed, again.
Right. I was confusing the object directory with the source directory.
> Do you think two calls of unnest-vars OK?
>
> nested-vars = obj-y
> dummy := $(call unnest-vars)
> include $(SRC_PATH)/Makefile.objs
> obj-base := ..
> nested-vars = block-obj-y common-obj-y
> dummy := $(call unnest-vars)
Yeah, that's fine.
Perhaps nested-vars and obj-base could become arguments to unnest-vars, too.
Paolo
>>> +dummy := $(call unnest-vars)
>>>
>>> all-obj-y = $(obj-y)
>>> -all-obj-y += $(addprefix ../, $(common-obj-y))
>>> +all-obj-y += $(addprefix ../, $(common-obj-y) $(block-obj-y))
>>>
>>> ifndef CONFIG_HAIKU
>>> LIBS+=-lm
>>> diff --git a/configure b/configure
>>> index e989609..cc3cd4d 100755
>>> --- a/configure
>>> +++ b/configure
>>> @@ -2251,6 +2251,7 @@ fi
>>> if $pkg_config --atleast-version=$glib_req_ver gthread-2.0; then
>>> glib_cflags=`$pkg_config --cflags gthread-2.0`
>>> glib_libs=`$pkg_config --libs gthread-2.0`
>>> + CFLAGS="$glib_cflags $CFLAGS"
>>> LIBS="$glib_libs $LIBS"
>>> libs_qga="$glib_libs $libs_qga"
>>> else
>>> diff --git a/rules.mak b/rules.mak
>>> index 4499745..3ff7d7a 100644
>>> --- a/rules.mak
>>> +++ b/rules.mak
>>> @@ -103,7 +103,7 @@ clean: clean-timestamp
>>>
>>> # magic to descend into other directories
>>>
>>> -obj := .
>>> +obj = $(obj-base)
>>> old-nested-dirs :=
>>>
>>> define push-var
>>> @@ -119,9 +119,11 @@ endef
>>>
>>> define unnest-dir
>>> $(foreach var,$(nested-vars),$(call push-var,$(var),$1/))
>>> -$(eval obj := $(obj)/$1)
>>> +$(eval obj-parent-$1 := $(obj))
>>> +$(eval obj := $(if $(obj),$(obj)/$1,$1))
>>> $(eval include $(SRC_PATH)/$1/Makefile.objs)
>>> -$(eval obj := $(patsubst %/$1,%,$(obj)))
>>> +$(eval obj := $(obj-parent-$1))
>>> +$(eval obj-parent-$1 := )
>>> $(foreach var,$(nested-vars),$(call pop-var,$(var),$1/))
>>> endef
>>>
>>> diff --git a/tests/Makefile b/tests/Makefile
>>> index baba9e9..15ef039 100644
>>> --- a/tests/Makefile
>>> +++ b/tests/Makefile
>>> @@ -110,6 +110,10 @@ test-qapi-obj-y = tests/test-qapi-visit.o tests/test-qapi-types.o
>>> $(test-obj-y): QEMU_INCLUDES += -Itests
>>> QEMU_CFLAGS += -I$(SRC_PATH)/tests
>>>
>>> +nested-vars := block-obj-y
>>> +obj-base := ..
>>> +dummy := $(call unnest-vars)
>>> +
>>> tests/test-x86-cpuid.o: QEMU_INCLUDES += -I$(SRC_PATH)/target-i386
>>>
>>> tests/check-qint$(EXESUF): tests/check-qint.o libqemuutil.a
>>>
>>
>
>
next prev parent reply other threads:[~2013-09-10 7:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-10 1:02 [Qemu-devel] [RFC PATCH v3 0/5] Shared Library Module Support Fam Zheng
2013-09-10 1:02 ` [Qemu-devel] [RFC PATCH v3 1/5] make.rule: fix $(obj) to a real relative path Fam Zheng
2013-09-10 6:34 ` Paolo Bonzini
2013-09-10 7:16 ` Fam Zheng
2013-09-10 7:58 ` Paolo Bonzini [this message]
2013-09-10 1:02 ` [Qemu-devel] [RFC PATCH v3 2/5] rule.mak: allow per object cflags and libs Fam Zheng
2013-09-10 1:02 ` [Qemu-devel] [RFC PATCH v3 3/5] Makefile: introduce common-obj-m and block-obj-m for DSO Fam Zheng
2013-09-10 6:45 ` Paolo Bonzini
2013-09-10 9:42 ` Fam Zheng
2013-09-10 10:01 ` Paolo Bonzini
2013-09-10 1:02 ` [Qemu-devel] [RFC PATCH v3 4/5] module: implement module loading function Fam Zheng
2013-09-10 1:02 ` [Qemu-devel] [RFC PATCH v3 5/5] block: build qed and curl as shared library Fam Zheng
2013-09-10 6:49 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=522ED10A.1080107@redhat.com \
--to=pbonzini@redhat.com \
--cc=famz@redhat.com \
--cc=mjt@tls.msk.ru \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=stefanha@redhat.com \
--cc=vilanova@ac.upc.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.