All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marcelo Ricardo Leitner <mleitner@redhat.com>
To: Nikolay Aleksandrov <nikolay@redhat.com>
Cc: netdev@vger.kernel.org, fubar@us.ibm.com, andy@greyhouse.net,
	davem@davemloft.net
Subject: Re: [PATCH -net v2 2/2] bonding: fix bond_arp_rcv setting and arp validate desync state
Date: Tue, 10 Sep 2013 11:48:48 -0300	[thread overview]
Message-ID: <522F3150.2090708@redhat.com> (raw)
In-Reply-To: <1378504826-18855-3-git-send-email-nikolay@redhat.com>

Em 06-09-2013 19:00, Nikolay Aleksandrov escreveu:
> We make bond_arp_rcv global so it can be used in bond_sysfs if the bond
> interface is up and arp_interval is being changed to a positive value
> and cleared otherwise as per Jay's suggestion.
> This also fixes a problem where bond_arp_rcv was set even though
> arp_validate was disabled while the bond was up by unsetting recv_probe
> in bond_store_arp_validate and respectively setting it if enabled.
>
> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>

Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>

> ---
> v2: fix the mode check in store_arp_validate
> I've intentionally left the prototype line >80 chars, let me know if I
> should break it.
>
>   drivers/net/bonding/bond_main.c  |  4 ++--
>   drivers/net/bonding/bond_sysfs.c | 19 ++++++++++++++++---
>   drivers/net/bonding/bonding.h    |  1 +
>   3 files changed, 19 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
> index 39e5b1c..72df399 100644
> --- a/drivers/net/bonding/bond_main.c
> +++ b/drivers/net/bonding/bond_main.c
> @@ -2404,8 +2404,8 @@ static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32
>   	slave->target_last_arp_rx[i] = jiffies;
>   }
>
> -static int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
> -			struct slave *slave)
> +int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
> +		 struct slave *slave)
>   {
>   	struct arphdr *arp = (struct arphdr *)skb->data;
>   	unsigned char *arp_ptr;
> diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
> index 4e38683..eeab40b 100644
> --- a/drivers/net/bonding/bond_sysfs.c
> +++ b/drivers/net/bonding/bond_sysfs.c
> @@ -349,6 +349,8 @@ static ssize_t bonding_store_mode(struct device *d,
>   		goto out;
>   	}
>
> +	/* don't cache arp_validate between modes */
> +	bond->params.arp_validate = BOND_ARP_VALIDATE_NONE;
>   	bond->params.mode = new_value;
>   	bond_set_mode_ops(bond, bond->params.mode);
>   	pr_info("%s: setting mode to %s (%d).\n",
> @@ -419,8 +421,8 @@ static ssize_t bonding_store_arp_validate(struct device *d,
>   					  struct device_attribute *attr,
>   					  const char *buf, size_t count)
>   {
> -	int new_value, ret = count;
>   	struct bonding *bond = to_bond(d);
> +	int new_value, ret = count;
>
>   	if (!rtnl_trylock())
>   		return restart_syscall();
> @@ -431,7 +433,7 @@ static ssize_t bonding_store_arp_validate(struct device *d,
>   		ret = -EINVAL;
>   		goto out;
>   	}
> -	if (new_value && (bond->params.mode != BOND_MODE_ACTIVEBACKUP)) {
> +	if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
>   		pr_err("%s: arp_validate only supported in active-backup mode.\n",
>   		       bond->dev->name);
>   		ret = -EINVAL;
> @@ -441,6 +443,12 @@ static ssize_t bonding_store_arp_validate(struct device *d,
>   		bond->dev->name, arp_validate_tbl[new_value].modename,
>   		new_value);
>
> +	if (bond->dev->flags & IFF_UP) {
> +		if (!new_value)
> +			bond->recv_probe = NULL;
> +		else if (bond->params.arp_interval)
> +			bond->recv_probe = bond_arp_rcv;
> +	}
>   	bond->params.arp_validate = new_value;
>   out:
>   	rtnl_unlock();
> @@ -561,8 +569,8 @@ static ssize_t bonding_store_arp_interval(struct device *d,
>   					  struct device_attribute *attr,
>   					  const char *buf, size_t count)
>   {
> -	int new_value, ret = count;
>   	struct bonding *bond = to_bond(d);
> +	int new_value, ret = count;
>
>   	if (!rtnl_trylock())
>   		return restart_syscall();
> @@ -605,8 +613,13 @@ static ssize_t bonding_store_arp_interval(struct device *d,
>   		 * is called.
>   		 */
>   		if (!new_value) {
> +			if (bond->params.arp_validate)
> +				bond->recv_probe = NULL;
>   			cancel_delayed_work_sync(&bond->arp_work);
>   		} else {
> +			/* arp_validate can be set only in active-backup mode */
> +			if (bond->params.arp_validate)
> +				bond->recv_probe = bond_arp_rcv;
>   			cancel_delayed_work_sync(&bond->mii_work);
>   			queue_delayed_work(bond->wq, &bond->arp_work, 0);
>   		}
> diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
> index f7ab161..7ad8bd5 100644
> --- a/drivers/net/bonding/bonding.h
> +++ b/drivers/net/bonding/bonding.h
> @@ -430,6 +430,7 @@ static inline bool slave_can_tx(struct slave *slave)
>
>   struct bond_net;
>
> +int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond, struct slave *slave);
>   struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr);
>   int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev);
>   void bond_xmit_slave_id(struct bonding *bond, struct sk_buff *skb, int slave_id);
>

  reply	other threads:[~2013-09-10 14:52 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-06 22:00 [PATCH -net v2 0/2] bonding: fix arp_validate desync state & race Nikolay Aleksandrov
2013-09-06 22:00 ` [PATCH -net v2 1/2] bonding: fix store_arp_validate race with mode change Nikolay Aleksandrov
2013-09-10 18:15   ` [-net,v2,1/2] " Veaceslav Falico
2013-09-06 22:00 ` [PATCH -net v2 2/2] bonding: fix bond_arp_rcv setting and arp validate desync state Nikolay Aleksandrov
2013-09-10 14:48   ` Marcelo Ricardo Leitner [this message]
2013-09-10 18:20   ` [-net, v2, " Veaceslav Falico
2013-09-11 19:55 ` [PATCH -net v2 0/2] bonding: fix arp_validate desync state & race David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=522F3150.2090708@redhat.com \
    --to=mleitner@redhat.com \
    --cc=andy@greyhouse.net \
    --cc=davem@davemloft.net \
    --cc=fubar@us.ibm.com \
    --cc=netdev@vger.kernel.org \
    --cc=nikolay@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.