Broadcom PCI ID 14e4:4313 reuse?

[Hauke Mehrtens <hauke@hauke-m.de>]

Hi Arend,

In OpenWrt someone reported that he has a BCM4313 with the PCI id
14e4:4313 [0]. The b43 wiki [1] says this was used for a BCM4311 with
just ieee80211a support.

Is it correct that BCM4313 also uses this PCI id, this chip was was
directly soldered onto a router? Is the b43 wiki wrong and 14e4:4313 was
not used for the BCM4311 or was this PCI id reused for a different device?

I am planing to prepare a patch adding support for a BCM4313 with the
PCI ID of 14e4:4313 and I will ignore that there could be some BCM4311
with this PCI id.

Log of BCM4313:

[    0.316000] pci 0000:01:00.0: [14e4:4313] type 00 class 0x028000
(...)
[   10.616000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[   10.624000] bcma: bus0: Found chip with id 0x4313, rev 0x01 and
package 0x08
[   10.628000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id
0x800, rev 0x24, class 0x0)
[   10.640000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id
0x812, rev 0x18, class 0x0)
[   10.648000] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820,
rev 0x11, class 0x0)
[   10.656000] bcma: bus0: Using fallback SPROM failed (err -2)
[   10.660000] bcma: bus0: No SPROM available
[   10.676000] bcma: bus0: Bus registered
[   11.040000] b43-phy0: Broadcom 4313 WLAN found (core revision 24)
[   11.048000] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 10, Type 8
(LCN), Revision 1)


[0]: https://dev.openwrt.org/ticket/13551
[1]: http://wireless.kernel.org/en/users/Drivers/b43

Hauke