From mboxrd@z Thu Jan 1 00:00:00 1970 From: C. McPherson Date: Thu, 12 Sep 2013 14:06:18 -0400 Subject: [ath9k-devel] Ath9k driver question In-Reply-To: References: <522F69A7.4060201@verizon.net> Message-ID: <5232029A.6070705@verizon.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Adrian: Thanks so much for the information, that really helps me. I think I am SOL with at least the 9300's we have. I'll have to look for the Enterprise revisions. Thanks Again Clyde On 09/11/2013 02:21 PM, Adrian Chadd wrote: > Hi, > > The AR9300 introduced "enterprise features". I _think_ half/quarter > rate operation is one of those enterprise features. However, I don't > know if it's a software or a hardware enforced thing. > > If your NIC doesn't support the half/quarter rate enterprise feature > then I think you're SoL. You may have to try the Enterprise revisions > of the AR9300 series hardware. > > > > -adrian > > > > On 10 September 2013 11:49, C. McPherson > wrote: > > ath9k developers: > > I have a question concerning the 9300 chip sets running in TURBO > mode. I > have the 9280 running in Turbo/10Mhz and 5Mhz mode and I have our > 9300's > running in 10Mhz and 5Mhz, but when I try to put them in Turbo mode it > will not happen. Does anyone know if Atheros/Qualcom dropped > support for > Turbo mode on the 9300's? What I'm doing is setting the > AR_PHY_GEN_CTRL > with (AR_PHY_GC_TURBO_MODE|AR_PHY_GC_TURBO_SHORT). > > Thanks much > Clyde > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20130912/96ffa82b/attachment.htm