From: "Andreas Färber" <afaerber@suse.de>
To: Peter Maydell <peter.maydell@linaro.org>
Cc: QEMU Developers <qemu-devel@nongnu.org>,
Paul Brook <paul@codesourcery.com>
Subject: Re: [Qemu-devel] [PATCH v4 24/24] arm11mpcore: Split off RealView MPCore
Date: Fri, 13 Sep 2013 17:40:10 +0200 [thread overview]
Message-ID: <523331DA.7020805@suse.de> (raw)
In-Reply-To: <CAFEAcA-1-pvgFtErP7FO_=FpH18NAY_p91WZwg2z5+txOhASiw@mail.gmail.com>
Am 13.09.2013 17:33, schrieb Peter Maydell:
> On 11 September 2013 15:37, Andreas Färber <afaerber@suse.de> wrote:
>> Signed-off-by: Andreas Färber <afaerber@suse.de>
>> ---
>> hw/cpu/Makefile.objs | 1 +
>> hw/cpu/arm11mpcore.c | 121 -----------------------------------------
>> hw/cpu/realview_mpcore.c | 139 +++++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 140 insertions(+), 121 deletions(-)
>> create mode 100644 hw/cpu/realview_mpcore.c
>>
>> diff --git a/hw/cpu/Makefile.objs b/hw/cpu/Makefile.objs
>> index df287c1..6381238 100644
>> --- a/hw/cpu/Makefile.objs
>> +++ b/hw/cpu/Makefile.objs
>> @@ -1,4 +1,5 @@
>> obj-$(CONFIG_ARM11MPCORE) += arm11mpcore.o
>> +obj-$(CONFIG_REALVIEW) += realview_mpcore.o
>> obj-$(CONFIG_A9MPCORE) += a9mpcore.o
>> obj-$(CONFIG_A15MPCORE) += a15mpcore.o
>> obj-$(CONFIG_ICC_BUS) += icc_bus.o
>> diff --git a/hw/cpu/arm11mpcore.c b/hw/cpu/arm11mpcore.c
>> index 0ec27c7..717d3e4 100644
>> --- a/hw/cpu/arm11mpcore.c
>> +++ b/hw/cpu/arm11mpcore.c
>> @@ -134,126 +134,6 @@ static void mpcore_priv_initfn(Object *obj)
>> qdev_set_parent_bus(DEVICE(&s->wdtimer), sysbus_get_default());
>> }
>>
>> -#define TYPE_REALVIEW_MPCORE_RIRQ "realview_mpcore"
>> -#define REALVIEW_MPCORE_RIRQ(obj) \
>> - OBJECT_CHECK(mpcore_rirq_state, (obj), TYPE_REALVIEW_MPCORE_RIRQ)
>> -
>> -/* Dummy PIC to route IRQ lines. The baseboard has 4 independent IRQ
>> - controllers. The output of these, plus some of the raw input lines
>> - are fed into a single SMP-aware interrupt controller on the CPU. */
>> -typedef struct {
>> - SysBusDevice parent_obj;
>> -
>> - qemu_irq cpuic[32];
>> - qemu_irq rvic[4][64];
>> - uint32_t num_cpu;
>> -
>> - ARM11MPCorePriveState priv;
>> - RealViewGICState gic[4];
>> -} mpcore_rirq_state;
>> -
>> -/* Map baseboard IRQs onto CPU IRQ lines. */
>> -static const int mpcore_irq_map[32] = {
>> - -1, -1, -1, -1, 1, 2, -1, -1,
>> - -1, -1, 6, -1, 4, 5, -1, -1,
>> - -1, 14, 15, 0, 7, 8, -1, -1,
>> - -1, -1, -1, -1, 9, 3, -1, -1,
>> -};
>> -
>> -static void mpcore_rirq_set_irq(void *opaque, int irq, int level)
>> -{
>> - mpcore_rirq_state *s = (mpcore_rirq_state *)opaque;
>> - int i;
>> -
>> - for (i = 0; i < 4; i++) {
>> - qemu_set_irq(s->rvic[i][irq], level);
>> - }
>> - if (irq < 32) {
>> - irq = mpcore_irq_map[irq];
>> - if (irq >= 0) {
>> - qemu_set_irq(s->cpuic[irq], level);
>> - }
>> - }
>> -}
>> -
>> -static void realview_mpcore_realize(DeviceState *dev, Error **errp)
>> -{
>> - SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
>> - mpcore_rirq_state *s = REALVIEW_MPCORE_RIRQ(dev);
>> - DeviceState *priv = DEVICE(&s->priv);
>> - DeviceState *gic;
>> - SysBusDevice *gicbusdev;
>> - Error *err = NULL;
>> - int n;
>> - int i;
>> -
>> - qdev_prop_set_uint32(priv, "num-cpu", s->num_cpu);
>> - object_property_set_bool(OBJECT(&s->priv), true, "realized", &err);
>> - if (err != NULL) {
>> - error_propagate(errp, err);
>> - return;
>> - }
>> - sysbus_pass_irq(sbd, SYS_BUS_DEVICE(&s->priv));
>> - for (i = 0; i < 32; i++) {
>> - s->cpuic[i] = qdev_get_gpio_in(priv, i);
>> - }
>> - /* ??? IRQ routing is hardcoded to "normal" mode. */
>> - for (n = 0; n < 4; n++) {
>> - object_property_set_bool(OBJECT(&s->gic[n]), true, "realized", &err);
>> - if (err != NULL) {
>> - error_propagate(errp, err);
>> - return;
>> - }
>> - gic = DEVICE(&s->gic[n]);
>> - gicbusdev = SYS_BUS_DEVICE(&s->gic[n]);
>> - sysbus_mmio_map(gicbusdev, 0, 0x10040000 + n * 0x10000);
>> - sysbus_connect_irq(gicbusdev, 0, s->cpuic[10 + n]);
>> - for (i = 0; i < 64; i++) {
>> - s->rvic[n][i] = qdev_get_gpio_in(gic, i);
>> - }
>> - }
>> - qdev_init_gpio_in(dev, mpcore_rirq_set_irq, 64);
>> -}
>> -
>> -static void mpcore_rirq_init(Object *obj)
>> -{
>> - SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
>> - mpcore_rirq_state *s = REALVIEW_MPCORE_RIRQ(obj);
>> - SysBusDevice *privbusdev;
>> - int i;
>> -
>> - object_initialize(&s->priv, sizeof(s->priv), TYPE_ARM11MPCORE_PRIV);
>> - qdev_set_parent_bus(DEVICE(&s->priv), sysbus_get_default());
>> - privbusdev = SYS_BUS_DEVICE(&s->priv);
>> - sysbus_init_mmio(sbd, sysbus_mmio_get_region(privbusdev, 0));
>> -
>> - for (i = 0; i < 4; i++) {
>> - object_initialize(&s->gic[i], sizeof(s->gic[i]), TYPE_REALVIEW_GIC);
>> - qdev_set_parent_bus(DEVICE(&s->gic[i]), sysbus_get_default());
>> - }
>> -}
>> -
>> -static Property mpcore_rirq_properties[] = {
>> - DEFINE_PROP_UINT32("num-cpu", mpcore_rirq_state, num_cpu, 1),
>> - DEFINE_PROP_END_OF_LIST(),
>> -};
>> -
>> -static void mpcore_rirq_class_init(ObjectClass *klass, void *data)
>> -{
>> - DeviceClass *dc = DEVICE_CLASS(klass);
>> -
>> - dc->realize = realview_mpcore_realize;
>> - dc->props = mpcore_rirq_properties;
>> -}
>> -
>> -static const TypeInfo mpcore_rirq_info = {
>> - .name = TYPE_REALVIEW_MPCORE_RIRQ,
>> - .parent = TYPE_SYS_BUS_DEVICE,
>> - .instance_size = sizeof(mpcore_rirq_state),
>> - .instance_init = mpcore_rirq_init,
>> - .class_init = mpcore_rirq_class_init,
>> -};
>> -
>> static Property mpcore_priv_properties[] = {
>> DEFINE_PROP_UINT32("num-cpu", ARM11MPCorePriveState, num_cpu, 1),
>> /* The ARM11 MPCORE TRM says the on-chip controller may have
>> @@ -286,7 +166,6 @@ static const TypeInfo mpcore_priv_info = {
>>
>> static void arm11mpcore_register_types(void)
>> {
>> - type_register_static(&mpcore_rirq_info);
>> type_register_static(&mpcore_priv_info);
>> }
>>
>> diff --git a/hw/cpu/realview_mpcore.c b/hw/cpu/realview_mpcore.c
>> new file mode 100644
>> index 0000000..c39a2da
>> --- /dev/null
>> +++ b/hw/cpu/realview_mpcore.c
>> @@ -0,0 +1,139 @@
>> +/*
>> + * RealView ARM11MPCore internal peripheral emulation
>
> This isn't really internal to anything, or at least if
> properly modelled it shouldn't be. It's part of the
> board: as the comment notes there are 4 GIC instances
> on the board, which are wired up to the 11MPCore's
> internal GIC. Ideally it ought to be untangled and
> it shouldn't specifically own an 11MPCorePrivState
> object. That said, we were already mismodelling this
> I think so I'm happy to let this patch go through as-is.
>
>> + ARM11MPCorePriveState priv;
>
> You might add a patch somewhere fixing the typo
> (PriveState->PrivState).
Will do, thanks.
Background of the split is an investigation of dc->vmsd assignments for
my VMState RFC. Similar split-offs for board-private devices will
follow, e.g., musicpal.
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
next prev parent reply other threads:[~2013-09-13 15:40 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-11 14:37 [Qemu-devel] [PATCH v4 00/24] arm: ARM11MPCore+A9MPCore+A15MPCore QOM'ification Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 01/24] a9mpcore: Split off instance_init Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 02/24] arm_gic: Extract headers hw/intc/arm_gic{, _common}.h Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 03/24] a9mpcore: Embed GICState Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 04/24] a9scu: QOM cleanups Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 05/24] a9mpcore: Embed A9SCUState Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 06/24] arm_mptimer: Convert to QOM realize Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 07/24] a9mpcore: Embed ARMMPTimerState Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 08/24] a9mpcore: Convert to QOM realize Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 09/24] a9mpcore: Prepare for QOM embedding Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 10/24] a15mpcore: Split off instance_init Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 11/24] a15mpcore: Embed GICState Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 12/24] a15mpcore: Convert to QOM realize Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 13/24] a15mpcore: Prepare for QOM embedding Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 14/24] a9scu: Build only once Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 15/24] arm11mpcore: Fix typo in MemoryRegion name Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 16/24] arm11mpcore: Drop unused fields Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 17/24] arm11mpcore: Create container MemoryRegion in instance_init Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 18/24] arm11mpcore: Split off SCU device Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 19/24] arm11mpcore: Convert ARM11MPCorePriveState to QOM realize Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 20/24] realview_gic: Convert " Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 21/24] realview_gic: Prepare for QOM embedding Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 22/24] arm11mpcore: Convert mpcore_rirq_state to QOM realize Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 23/24] arm11mpcore: Prepare for QOM embedding Andreas Färber
2013-09-11 14:37 ` [Qemu-devel] [PATCH v4 24/24] arm11mpcore: Split off RealView MPCore Andreas Färber
2013-09-13 15:33 ` Peter Maydell
2013-09-13 15:40 ` Andreas Färber [this message]
2013-09-13 15:38 ` [Qemu-devel] [PATCH v4 00/24] arm: ARM11MPCore+A9MPCore+A15MPCore QOM'ification Peter Maydell
2013-09-18 17:06 ` Andreas Färber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=523331DA.7020805@suse.de \
--to=afaerber@suse.de \
--cc=paul@codesourcery.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.