All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Juergen Beisert <jbe@pengutronix.de>
Cc: linux-iio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	devel@driverdev.osuosl.org, marex@denx.de,
	fabio.estevam@freescale.com, jic23@cam.ac.uk
Subject: Re: [PATCH 4/6] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC touchscreen driver
Date: Sun, 15 Sep 2013 11:50:09 +0100	[thread overview]
Message-ID: <523590E1.6030309@kernel.org> (raw)
In-Reply-To: <1378887511-24530-5-git-send-email-jbe@pengutronix.de>

On 09/11/13 09:18, Juergen Beisert wrote:
> Distinguish i.MX23 and i.MX28 at runtime and do the same for both SoC at least
> for the 4 wire touchscreen.
> 
> Note: support for the remaining LRADC channels is not tested on an
> i.MX23 yet.
An ominous comment. Are you likely to test them soon?

Minor code layout comment inline but otherwise I'm just looking for an
ack from Marek.
> 
> Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
> CC: linux-arm-kernel@lists.infradead.org
> CC: devel@driverdev.osuosl.org
> CC: Marek Vasut <marex@denx.de>
> CC: Fabio Estevam <fabio.estevam@freescale.com>
> CC: Jonathan Cameron <jic23@cam.ac.uk>
> ---
>  drivers/staging/iio/adc/mxs-lradc.c | 45 +++++++++++++++++++++++++++++++++----
>  1 file changed, 41 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
> index 4317fee..c81b186 100644
> --- a/drivers/staging/iio/adc/mxs-lradc.c
> +++ b/drivers/staging/iio/adc/mxs-lradc.c
> @@ -188,20 +188,33 @@ struct mxs_lradc {
>  # define LRADC_CTRL0_MX28_XNPSW	/* XM */	(1 << 17)
>  # define LRADC_CTRL0_MX28_XPPSW	/* XP */	(1 << 16)
>  
> +# define LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE	(1 << 20)
> +# define LRADC_CTRL0_MX23_YM			(1 << 19)
> +# define LRADC_CTRL0_MX23_XM			(1 << 18)
> +# define LRADC_CTRL0_MX23_YP			(1 << 17)
> +# define LRADC_CTRL0_MX23_XP			(1 << 16)
> +
>  # define LRADC_CTRL0_MX28_PLATE_MASK \
>  		(LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \
>  		LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \
>  		LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \
>  		LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW)
>  
> +# define LRADC_CTRL0_MX23_PLATE_MASK \
> +		(LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE | \
> +		LRADC_CTRL0_MX23_YM | LRADC_CTRL0_MX23_XM | \
> +		LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XP)
> +
>  #define	LRADC_CTRL1				0x10
>  #define	LRADC_CTRL1_TOUCH_DETECT_IRQ_EN		(1 << 24)
>  #define	LRADC_CTRL1_LRADC_IRQ_EN(n)		(1 << ((n) + 16))
>  #define	LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK	(0x1fff << 16)
> +#define	LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK	(0x01ff << 16)
>  #define	LRADC_CTRL1_LRADC_IRQ_EN_OFFSET		16
>  #define	LRADC_CTRL1_TOUCH_DETECT_IRQ		(1 << 8)
>  #define	LRADC_CTRL1_LRADC_IRQ(n)		(1 << (n))
>  #define	LRADC_CTRL1_MX28_LRADC_IRQ_MASK		0x1fff
> +#define	LRADC_CTRL1_MX23_LRADC_IRQ_MASK		0x01ff
>  #define	LRADC_CTRL1_LRADC_IRQ_OFFSET		0
>  
>  #define	LRADC_CTRL2				0x20
> @@ -252,36 +265,50 @@ static void mxs_lradc_reg(struct mxs_lradc *lradc, u32 val, u32 reg)
>  
>  static u32 mxs_lradc_plate_mask(struct mxs_lradc *lradc)
>  {
> +	if (lradc->soc == IMX23_LRADC)
> +		return LRADC_CTRL0_MX23_PLATE_MASK;
>  	return LRADC_CTRL0_MX28_PLATE_MASK;
>  }
>  
>  static u32 mxs_lradc_irq_en_mask(struct mxs_lradc *lradc)
>  {
> +	if (lradc->soc == IMX23_LRADC)
> +		return LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK;
>  	return LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK;
>  }
>  
>  static u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc)
>  {
> +	if (lradc->soc == IMX23_LRADC)
> +		return LRADC_CTRL1_MX23_LRADC_IRQ_MASK;
>  	return LRADC_CTRL1_MX28_LRADC_IRQ_MASK;
>  }
>  
>  static u32 mxs_lradc_touch_detect_bit(struct mxs_lradc *lradc)
>  {
> +	if (lradc->soc == IMX23_LRADC)
> +		return LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE;
>  	return LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE;
>  }
>  
>  static u32 mxs_lradc_drive_x_plate(struct mxs_lradc *lradc)
>  {
> +	if (lradc->soc == IMX23_LRADC)
> +		return LRADC_CTRL0_MX23_XP | LRADC_CTRL0_MX23_XM;
>  	return LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW;
>  }
>  
>  static u32 mxs_lradc_drive_y_plate(struct mxs_lradc *lradc)
>  {
> +	if (lradc->soc == IMX23_LRADC)
> +		return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_YM;
>  	return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW;
>  }
>  
>  static u32 mxs_lradc_drive_pressure(struct mxs_lradc *lradc)
>  {
> +	if (lradc->soc == IMX23_LRADC)
> +		return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XM;
>  	return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW;
Whilst it obviously doesn't actually matter, having an else
in there would make the code more consistent so personally
I would prefer it to be there.

>  }
>  
> @@ -319,7 +346,8 @@ static int mxs_lradc_read_raw(struct iio_dev *iio_dev,
>  	 * Virtual channel 0 is always used here as the others are always not
>  	 * used if doing raw sampling.
>  	 */
> -	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
> +	if (lradc->soc == IMX28_LRADC)
> +		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
>  			LRADC_CTRL1);
>  	mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
>  
> @@ -767,7 +795,8 @@ static int mxs_lradc_buffer_preenable(struct iio_dev *iio)
>  	if (ret < 0)
>  		goto err_buf;
>  
> -	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
> +	if (lradc->soc == IMX28_LRADC)
> +		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
>  							LRADC_CTRL1);
>  	mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
>  
> @@ -805,7 +834,8 @@ static int mxs_lradc_buffer_postdisable(struct iio_dev *iio)
>  					LRADC_DELAY_KICK, LRADC_DELAY(0));
>  
>  	mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
> -	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
> +	if (lradc->soc == IMX28_LRADC)
> +		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
>  					LRADC_CTRL1);
>  
>  	kfree(lradc->buffer);
> @@ -909,7 +939,8 @@ static int mxs_lradc_hw_init(struct mxs_lradc *lradc)
>  	mxs_lradc_reg(lradc, 0, LRADC_DELAY(3));
>  
>  	/* Configure the touchscreen type */
> -	mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
> +	if (lradc->soc == IMX28_LRADC) {
> +		mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
>  							LRADC_CTRL0);
>  
>  	if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE)
> @@ -987,6 +1018,12 @@ static int mxs_lradc_probe(struct platform_device *pdev)
>  		dev_warn(dev, "Unsupported number of touchscreen wires (%d)\n",
>  				ts_wires);
>  
> +	if ((lradc->soc == IMX23_LRADC) && (ts_wires == 5)) {
> +		dev_warn(dev, "No support for 5 wire touches on i.MX23\n");
> +		dev_warn(dev, "Falling back to 4 wire\n");
> +		ts_wires = 4;
> +	}
> +
>  	/* Grab all IRQ sources */
>  	for (i = 0; i < of_cfg->irq_count; i++) {
>  		lradc->irq[i] = platform_get_irq(pdev, i);
> 

WARNING: multiple messages have this Message-ID (diff)
From: jic23@kernel.org (Jonathan Cameron)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/6] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC touchscreen driver
Date: Sun, 15 Sep 2013 11:50:09 +0100	[thread overview]
Message-ID: <523590E1.6030309@kernel.org> (raw)
In-Reply-To: <1378887511-24530-5-git-send-email-jbe@pengutronix.de>

On 09/11/13 09:18, Juergen Beisert wrote:
> Distinguish i.MX23 and i.MX28 at runtime and do the same for both SoC at least
> for the 4 wire touchscreen.
> 
> Note: support for the remaining LRADC channels is not tested on an
> i.MX23 yet.
An ominous comment. Are you likely to test them soon?

Minor code layout comment inline but otherwise I'm just looking for an
ack from Marek.
> 
> Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
> CC: linux-arm-kernel at lists.infradead.org
> CC: devel at driverdev.osuosl.org
> CC: Marek Vasut <marex@denx.de>
> CC: Fabio Estevam <fabio.estevam@freescale.com>
> CC: Jonathan Cameron <jic23@cam.ac.uk>
> ---
>  drivers/staging/iio/adc/mxs-lradc.c | 45 +++++++++++++++++++++++++++++++++----
>  1 file changed, 41 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
> index 4317fee..c81b186 100644
> --- a/drivers/staging/iio/adc/mxs-lradc.c
> +++ b/drivers/staging/iio/adc/mxs-lradc.c
> @@ -188,20 +188,33 @@ struct mxs_lradc {
>  # define LRADC_CTRL0_MX28_XNPSW	/* XM */	(1 << 17)
>  # define LRADC_CTRL0_MX28_XPPSW	/* XP */	(1 << 16)
>  
> +# define LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE	(1 << 20)
> +# define LRADC_CTRL0_MX23_YM			(1 << 19)
> +# define LRADC_CTRL0_MX23_XM			(1 << 18)
> +# define LRADC_CTRL0_MX23_YP			(1 << 17)
> +# define LRADC_CTRL0_MX23_XP			(1 << 16)
> +
>  # define LRADC_CTRL0_MX28_PLATE_MASK \
>  		(LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \
>  		LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \
>  		LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \
>  		LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW)
>  
> +# define LRADC_CTRL0_MX23_PLATE_MASK \
> +		(LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE | \
> +		LRADC_CTRL0_MX23_YM | LRADC_CTRL0_MX23_XM | \
> +		LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XP)
> +
>  #define	LRADC_CTRL1				0x10
>  #define	LRADC_CTRL1_TOUCH_DETECT_IRQ_EN		(1 << 24)
>  #define	LRADC_CTRL1_LRADC_IRQ_EN(n)		(1 << ((n) + 16))
>  #define	LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK	(0x1fff << 16)
> +#define	LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK	(0x01ff << 16)
>  #define	LRADC_CTRL1_LRADC_IRQ_EN_OFFSET		16
>  #define	LRADC_CTRL1_TOUCH_DETECT_IRQ		(1 << 8)
>  #define	LRADC_CTRL1_LRADC_IRQ(n)		(1 << (n))
>  #define	LRADC_CTRL1_MX28_LRADC_IRQ_MASK		0x1fff
> +#define	LRADC_CTRL1_MX23_LRADC_IRQ_MASK		0x01ff
>  #define	LRADC_CTRL1_LRADC_IRQ_OFFSET		0
>  
>  #define	LRADC_CTRL2				0x20
> @@ -252,36 +265,50 @@ static void mxs_lradc_reg(struct mxs_lradc *lradc, u32 val, u32 reg)
>  
>  static u32 mxs_lradc_plate_mask(struct mxs_lradc *lradc)
>  {
> +	if (lradc->soc == IMX23_LRADC)
> +		return LRADC_CTRL0_MX23_PLATE_MASK;
>  	return LRADC_CTRL0_MX28_PLATE_MASK;
>  }
>  
>  static u32 mxs_lradc_irq_en_mask(struct mxs_lradc *lradc)
>  {
> +	if (lradc->soc == IMX23_LRADC)
> +		return LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK;
>  	return LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK;
>  }
>  
>  static u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc)
>  {
> +	if (lradc->soc == IMX23_LRADC)
> +		return LRADC_CTRL1_MX23_LRADC_IRQ_MASK;
>  	return LRADC_CTRL1_MX28_LRADC_IRQ_MASK;
>  }
>  
>  static u32 mxs_lradc_touch_detect_bit(struct mxs_lradc *lradc)
>  {
> +	if (lradc->soc == IMX23_LRADC)
> +		return LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE;
>  	return LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE;
>  }
>  
>  static u32 mxs_lradc_drive_x_plate(struct mxs_lradc *lradc)
>  {
> +	if (lradc->soc == IMX23_LRADC)
> +		return LRADC_CTRL0_MX23_XP | LRADC_CTRL0_MX23_XM;
>  	return LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW;
>  }
>  
>  static u32 mxs_lradc_drive_y_plate(struct mxs_lradc *lradc)
>  {
> +	if (lradc->soc == IMX23_LRADC)
> +		return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_YM;
>  	return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW;
>  }
>  
>  static u32 mxs_lradc_drive_pressure(struct mxs_lradc *lradc)
>  {
> +	if (lradc->soc == IMX23_LRADC)
> +		return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XM;
>  	return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW;
Whilst it obviously doesn't actually matter, having an else
in there would make the code more consistent so personally
I would prefer it to be there.

>  }
>  
> @@ -319,7 +346,8 @@ static int mxs_lradc_read_raw(struct iio_dev *iio_dev,
>  	 * Virtual channel 0 is always used here as the others are always not
>  	 * used if doing raw sampling.
>  	 */
> -	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
> +	if (lradc->soc == IMX28_LRADC)
> +		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
>  			LRADC_CTRL1);
>  	mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
>  
> @@ -767,7 +795,8 @@ static int mxs_lradc_buffer_preenable(struct iio_dev *iio)
>  	if (ret < 0)
>  		goto err_buf;
>  
> -	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
> +	if (lradc->soc == IMX28_LRADC)
> +		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
>  							LRADC_CTRL1);
>  	mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
>  
> @@ -805,7 +834,8 @@ static int mxs_lradc_buffer_postdisable(struct iio_dev *iio)
>  					LRADC_DELAY_KICK, LRADC_DELAY(0));
>  
>  	mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
> -	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
> +	if (lradc->soc == IMX28_LRADC)
> +		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
>  					LRADC_CTRL1);
>  
>  	kfree(lradc->buffer);
> @@ -909,7 +939,8 @@ static int mxs_lradc_hw_init(struct mxs_lradc *lradc)
>  	mxs_lradc_reg(lradc, 0, LRADC_DELAY(3));
>  
>  	/* Configure the touchscreen type */
> -	mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
> +	if (lradc->soc == IMX28_LRADC) {
> +		mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
>  							LRADC_CTRL0);
>  
>  	if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE)
> @@ -987,6 +1018,12 @@ static int mxs_lradc_probe(struct platform_device *pdev)
>  		dev_warn(dev, "Unsupported number of touchscreen wires (%d)\n",
>  				ts_wires);
>  
> +	if ((lradc->soc == IMX23_LRADC) && (ts_wires == 5)) {
> +		dev_warn(dev, "No support for 5 wire touches on i.MX23\n");
> +		dev_warn(dev, "Falling back to 4 wire\n");
> +		ts_wires = 4;
> +	}
> +
>  	/* Grab all IRQ sources */
>  	for (i = 0; i < of_cfg->irq_count; i++) {
>  		lradc->irq[i] = platform_get_irq(pdev, i);
> 

  reply	other threads:[~2013-09-15  9:49 UTC|newest]

Thread overview: 69+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-11  8:18 [RFCv4] staging/iio/adc: change the MXS touchscreen driver implementation Juergen Beisert
2013-09-11  8:18 ` Juergen Beisert
2013-09-11  8:18 ` [PATCH 1/6] Staging/iio/adc/touchscreen/MXS: distinguish i.MX23's and i.MX28's LRADC Juergen Beisert
2013-09-11  8:18   ` Juergen Beisert
2013-09-11  8:18 ` [PATCH 2/6] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits Juergen Beisert
2013-09-11  8:18   ` Juergen Beisert
2013-09-15 10:27   ` Jonathan Cameron
2013-09-15 10:27     ` Jonathan Cameron
2013-09-11  8:18 ` [PATCH 3/6] Staging/iio/adc/touchscreen/MXS: simplify register access Juergen Beisert
2013-09-11  8:18   ` Juergen Beisert
2013-09-15 10:35   ` Jonathan Cameron
2013-09-15 10:35     ` Jonathan Cameron
2013-09-16  8:17     ` Jürgen Beisert
2013-09-16  8:17       ` Jürgen Beisert
2013-09-16 18:39       ` Jonathan Cameron
2013-09-16 18:39         ` Jonathan Cameron
2013-09-16 14:15   ` Marek Vasut
2013-09-16 14:15     ` Marek Vasut
2013-09-11  8:18 ` [PATCH 4/6] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC touchscreen driver Juergen Beisert
2013-09-11  8:18   ` Juergen Beisert
2013-09-15 10:50   ` Jonathan Cameron [this message]
2013-09-15 10:50     ` Jonathan Cameron
2013-09-16  8:14     ` Jürgen Beisert
2013-09-16  8:14       ` Jürgen Beisert
2013-09-16 14:19       ` Marek Vasut
2013-09-16 14:19         ` Marek Vasut
2013-09-11  8:18 ` [PATCH 5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection Juergen Beisert
2013-09-11  8:18   ` Juergen Beisert
     [not found]   ` <1378887511-24530-6-git-send-email-jbe-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-09-15 10:56     ` Jonathan Cameron
2013-09-15 10:56       ` Jonathan Cameron
2013-09-15 10:56       ` Jonathan Cameron
     [not found]       ` <52359259.8010202-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2013-09-15 16:10         ` Jonathan Cameron
2013-09-15 16:10           ` Jonathan Cameron
2013-09-15 16:10           ` Jonathan Cameron
     [not found]           ` <5235DBEA.7030402-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2013-09-16  8:38             ` Jürgen Beisert
2013-09-16  8:38               ` Jürgen Beisert
2013-09-16  8:38               ` Jürgen Beisert
2013-09-16  8:10         ` Jürgen Beisert
2013-09-16  8:10           ` Jürgen Beisert
2013-09-16  8:10           ` Jürgen Beisert
     [not found]           ` <201309161010.22151.jbe-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-09-16  9:37             ` Jürgen Beisert
2013-09-16  9:37               ` Jürgen Beisert
2013-09-16  9:37               ` Jürgen Beisert
2013-09-16 14:23             ` Marek Vasut
2013-09-16 14:23               ` Marek Vasut
2013-09-16 14:23               ` Marek Vasut
     [not found]               ` <201309161623.48247.marex-ynQEQJNshbs@public.gmane.org>
2013-09-16 14:34                 ` Jürgen Beisert
2013-09-16 14:34                   ` Jürgen Beisert
2013-09-16 14:34                   ` Jürgen Beisert
2013-09-16 15:10                   ` Marek Vasut
2013-09-16 15:10                     ` Marek Vasut
2013-09-16 15:10                     ` Marek Vasut
2013-09-16 15:30             ` Jonathan Cameron
2013-09-16 15:30               ` Jonathan Cameron
2013-09-16 15:30               ` Jonathan Cameron
     [not found]               ` <0fb59809-c835-49b0-bd82-e791db1a9db7-2ueSQiBKiTY7tOexoI0I+QC/G2K4zDHf@public.gmane.org>
2013-09-19 12:49                 ` Jürgen Beisert
2013-09-19 12:49                   ` Jürgen Beisert
2013-09-19 12:49                   ` Jürgen Beisert
     [not found]                   ` <201309191449.37274.jbe-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-09-19 16:12                     ` Jonathan Cameron
2013-09-19 16:12                       ` Jonathan Cameron
2013-09-19 16:12                       ` Jonathan Cameron
2013-09-16 15:28         ` Dmitry Torokhov
2013-09-16 15:28           ` Dmitry Torokhov
2013-09-16 15:28           ` Dmitry Torokhov
     [not found]           ` <20130916152846.GC12105-WlK9ik9hQGAhIp7JRqBPierSzoNAToWh@public.gmane.org>
2013-09-17  7:33             ` Jürgen Beisert
2013-09-17  7:33               ` Jürgen Beisert
2013-09-17  7:33               ` Jürgen Beisert
2013-09-11  8:18 ` [PATCH 6/6] Staging/iio/adc/touchscreen/MXS: Remove old touchscreen detection implementation Juergen Beisert
2013-09-11  8:18   ` Juergen Beisert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=523590E1.6030309@kernel.org \
    --to=jic23@kernel.org \
    --cc=devel@driverdev.osuosl.org \
    --cc=fabio.estevam@freescale.com \
    --cc=jbe@pengutronix.de \
    --cc=jic23@cam.ac.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=marex@denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.