Did anybody observed this issue? -------- Original Message -------- Subject: powertop 2.4 questions Date: Tue, 17 Sep 2013 10:14:49 -0700 From: Marc MERLIN To: srinivas.pandruvada(a)linux.intel.com Hi Srinivas, As discussed, I have a couple of powertop questions, thanks for passing them on. I did try the mailing list: Date: Fri, 2 Aug 2013 10:27:38 -0700 From: Marc MERLIN To: powertop(a)ml01.01.org but I never heard anything back. Is the list mostly dead, or is there another list? So, I got powertop 2.4 from https://01.org/powertop/downloads/2013/powertop-v2.4 Like I showed you on my laptop, when I go left and right with my arrows, I'm on the Overview screen, and I can't move to Idle stats or Freq stats like I could in older powertops: ---------------------------------------------------------------------------- PowerTOP 2.4 Overview Idle stats Frequency stats Device stats Tunables Summary: 1862.8 wakeups/second, 5.9 GPU ops/seconds, 0.0 VFS ops/sec and 26.5% CPU use Power est. Usage Events/s Category Description 3.30 W 9.8% Device Display backlight 2.67 W 0.0 pkts/s Device Network interface: wlan0 (iwlwifi) 1.34 W 100.0% Device USB device: Integrated Camera (Chicony Ele 957 mW 4.2 ms/s 43.4 Process /usr/bin/pulseaudio --start 635 mW 154.3 ms/s 1229.7 Process /usr/bin/enlightenment ---------------------------------------------------------------------------- Separately, it reports this: 1.25 W 100.0% Device USB device: Integrated Camera (Chicony Electronics Co., Ltd.) It's on a thinkpad T530. I haven't found a way to stop that. I've unloaded the uvcvideo driver, but generally haven't found anything else I can do. If you have any ideas, it would be greatly appreciated. Thanks, Marc -- "A mouse is a device used to point at the xterm you want to type in" - A.S.R. Microsoft is to operating systems .... .... what McDonalds is to gourmet cooking Home page: http://marc.merlins.org/ | PGP 1024R/763BE901