From mboxrd@z Thu Jan 1 00:00:00 1970 From: Igor Grinberg Date: Thu, 19 Sep 2013 18:00:37 +0300 Subject: [U-Boot] [PATCH v2 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h In-Reply-To: References: <1378109042-9994-1-git-send-email-javier.martinez@collabora.co.uk> <1378109042-9994-2-git-send-email-javier.martinez@collabora.co.uk> Message-ID: <523B1195.5@compulab.co.il> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Javier, On 09/19/2013 04:04 PM, Javier Martinez Canillas wrote: > On Mon, Sep 2, 2013 at 1:52 PM, Enric Balletbo Serra > wrote: >> 2013/9/2 Javier Martinez Canillas : >>> There seems to be a naming convention for the configuration >>> files for boards using the same SoC family. This makes >>> easier to do changes that affect different boards based >>> on the same SoC. >>> >>> Since the IGEPv2 board and the IGEP COM Module use a TI >>> OMAP35xx/DM37xx processor, is better to rename its board >>> config to use this naming scheme. >>> >>> Signed-off-by: Javier Martinez Canillas >>> --- >>> >>> Changes since v1: >>> - Fix some issues in the commit changelog pointed out by Enric Balletbo. >>> >>> boards.cfg | 10 +- >>> include/configs/igep00x0.h | 370 --------------------------------------- >>> include/configs/omap3_igep00x0.h | 370 +++++++++++++++++++++++++++++++++++++++ >>> 3 files changed, 375 insertions(+), 375 deletions(-) >>> delete mode 100644 include/configs/igep00x0.h >>> create mode 100644 include/configs/omap3_igep00x0.h >>> >>> diff --git a/boards.cfg b/boards.cfg >>> index d717226..8f1cb6e 100644 >>> --- a/boards.cfg >>> +++ b/boards.cfg >>> @@ -297,11 +297,11 @@ omap3_overo arm armv7 overo - >>> omap3_pandora arm armv7 pandora - omap3 >>> dig297 arm armv7 dig297 comelit omap3 >>> cm_t35 arm armv7 cm_t35 compulab omap3 >>> -igep0020 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND >>> -igep0020_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND >>> -igep0030 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND >>> -igep0030_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND >>> -igep0032 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND >>> +omap3_igep0020 arm armv7 igep00x0 isee omap3 omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND >>> +omap3_igep0020_nand arm armv7 igep00x0 isee omap3 omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND >>> +omap3_igep0030 arm armv7 igep00x0 isee omap3 omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND >>> +omap3_igep0030_nand arm armv7 igep00x0 isee omap3 omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND >>> +omap3_igep0032 arm armv7 igep00x0 isee omap3 omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND >>> am335x_igep0033 arm armv7 igep0033 isee am33xx >>> am3517_evm arm armv7 am3517evm logicpd omap3 >>> mt_ventoux arm armv7 mt_ventoux teejet omap3 > >> Acked-by: Enric Balletbo i Serra > > These patches don't apply on master anymore after commit 27af930e9 > ("Merge and reformat boards.cfg and MAINTAINERS"). I'll rebase the > patches and repost. If you are about to repost, can you please add '-M' flag to git format-patch command (if you use this command). This will detect renames and lower the patch size... -- Regards, Igor