From: Troy Kisky <troy.kisky@boundarydevices.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V4 16/17] nitrogen6x: add otg usb host/device mode support
Date: Thu, 19 Sep 2013 21:08:26 -0700 [thread overview]
Message-ID: <523BCA3A.5050003@boundarydevices.com> (raw)
In-Reply-To: <1379647780-2623-17-git-send-email-troy.kisky@boundarydevices.com>
On 9/19/2013 8:29 PM, Troy Kisky wrote:
> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
>
> ---
> v4: similar to Nitrogen6x: add otg usb ethernet gadget support
> But I added pad setup for over current, otg_id, and power control
> Added board_ehci_power function to enable power for host mode.
> Removed otg_id selection done now in previous patch.
> ---
> board/boundary/nitrogen6x/nitrogen6x.c | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
> index c6efafc..9b07846 100644
> --- a/board/boundary/nitrogen6x/nitrogen6x.c
> +++ b/board/boundary/nitrogen6x/nitrogen6x.c
> @@ -30,6 +30,7 @@
> #include <i2c.h>
>
> DECLARE_GLOBAL_DATA_PTR;
> +#define GP_USB_OTG_PWR IMX_GPIO_NR(3, 22)
>
> #define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
> PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
> @@ -179,6 +180,14 @@ iomux_v3_cfg_t const enet_pads2[] = {
> MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
> };
>
> +static iomux_v3_cfg_t const misc_pads[] = {
> + MX6_PAD_GPIO_1__USBOTG_ID | MUX_PAD_CTRL(WEAK_PULLUP),
> + MX6_PAD_KEY_COL4__USBOH3_USBOTG_OC | MUX_PAD_CTRL(WEAK_PULLUP),
> + MX6_PAD_EIM_D30__USBOH3_USBH1_OC | MUX_PAD_CTRL(WEAK_PULLUP),
> + /* OTG Power enable */
> + MX6_PAD_EIM_D22__GPIO_3_22 | MUX_PAD_CTRL(OUTPUT_40OHM),
> +};
> +
MX6_PAD_GPIO_1__USBOTG_ID is undefined, so please skip this patch and
let me correct.
The was defined in a patch by Eric that I missed including.
Thanks
next prev parent reply other threads:[~2013-09-20 4:08 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-20 3:29 [U-Boot] [PATCH V4 00/17] Make mv_udc work for i.mx6 Troy Kisky
2013-09-20 3:29 ` [U-Boot] [PATCH V4 01/17] usb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROLLER_COUNT Troy Kisky
2013-09-20 10:45 ` Marek Vasut
2013-09-20 18:18 ` Troy Kisky
2013-09-23 0:05 ` Marek Vasut
2013-09-23 20:23 ` Troy Kisky
2013-09-23 20:55 ` Troy Kisky
2013-09-23 21:17 ` Marek Vasut
2013-09-20 3:29 ` [U-Boot] [PATCH V4 02/17] usb: ehci-mx6: add support for host mode otg port Troy Kisky
2013-09-20 10:51 ` Marek Vasut
2013-09-20 18:27 ` Troy Kisky
2013-09-20 3:29 ` [U-Boot] [PATCH V4 03/17] usb: gadget: ether set wMaxPacketSize Troy Kisky
2013-09-20 10:52 ` Marek Vasut
2013-09-20 18:34 ` Troy Kisky
2013-09-23 0:04 ` Marek Vasut
2013-09-23 19:51 ` Troy Kisky
2013-09-23 21:22 ` Marek Vasut
2013-09-20 3:29 ` [U-Boot] [PATCH V4 04/17] usb: gadget: ether: return error from rx_submit if no request Troy Kisky
2013-09-20 10:52 ` Marek Vasut
2013-09-20 3:29 ` [U-Boot] [PATCH V4 05/17] usb: gadget: mv_udc: split mv_udc.h file Troy Kisky
2013-09-20 3:29 ` [U-Boot] [PATCH V4 06/17] usb: udc: add udc.h include file Troy Kisky
2013-09-20 10:55 ` Marek Vasut
2013-09-20 18:46 ` Troy Kisky
2013-09-20 18:52 ` Marek Vasut
2013-09-20 19:37 ` Troy Kisky
2013-09-20 19:53 ` Marek Vasut
2013-09-20 21:15 ` Troy Kisky
2013-09-20 21:20 ` Marek Vasut
2013-09-20 21:33 ` Troy Kisky
2013-09-20 22:01 ` Marek Vasut
2013-09-21 0:25 ` Troy Kisky
2013-09-20 3:29 ` [U-Boot] [PATCH V4 07/17] usb: gadget: mv_udc: fix typo in error message Troy Kisky
2013-09-20 3:29 ` [U-Boot] [PATCH V4 08/17] usb: gadget: mv_udc: set is_dualspeed = 1 Troy Kisky
2013-09-20 3:29 ` [U-Boot] [PATCH V4 09/17] usb: gadget: mv_udc: fix full speed connections Troy Kisky
2013-09-20 3:29 ` [U-Boot] [PATCH V4 10/17] usb: gadget: mv_udc: optimize bounce Troy Kisky
2013-09-20 10:58 ` Marek Vasut
2013-09-20 18:58 ` Troy Kisky
2013-09-23 0:02 ` Marek Vasut
2013-09-23 19:12 ` Troy Kisky
2013-09-23 21:23 ` Marek Vasut
2013-09-20 3:29 ` [U-Boot] [PATCH V4 11/17] usb: gadget: mv_udc: flush item before head Troy Kisky
2013-09-20 3:29 ` [U-Boot] [PATCH V4 12/17] usb: gadget: mv_udc: optimize ep_enable Troy Kisky
2013-09-20 3:29 ` [U-Boot] [PATCH V4 13/17] usb: gadget: mv_udc: zero transfer descriptor memory on probe Troy Kisky
2013-09-20 3:29 ` [U-Boot] [PATCH V4 14/17] usb: gadget: mv_udc: clear desc upon ep_disable Troy Kisky
2013-09-20 3:29 ` [U-Boot] [PATCH V4 15/17] mx6: iomux: add GPR1 defines for use with nitrogen6x Troy Kisky
2013-09-20 3:29 ` [U-Boot] [PATCH V4 16/17] nitrogen6x: add otg usb host/device mode support Troy Kisky
2013-09-20 4:08 ` Troy Kisky [this message]
2013-09-20 3:29 ` [U-Boot] [PATCH V4 17/17] nitrogen6x: add CONFIG_MV_UDC Troy Kisky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=523BCA3A.5050003@boundarydevices.com \
--to=troy.kisky@boundarydevices.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.