From: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
To: Eduardo Valentin <eduardo.valentin-l0cyMroinI0@public.gmane.org>
Cc: swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ian.campbell-Sxgqhf6Nn4DQT0dZR+AlfA@public.gmane.org,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org,
grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
durgadoss.r-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
Subject: Re: [PATCHv3 05/16] hwmon: lm75: expose to thermal fw via DT nodes
Date: Sat, 21 Sep 2013 19:24:55 -0700 [thread overview]
Message-ID: <523E54F7.9010403@roeck-us.net> (raw)
In-Reply-To: <523E388F.80707-l0cyMroinI0@public.gmane.org>
On 09/21/2013 05:23 PM, Eduardo Valentin wrote:
> On 21-09-2013 19:56, Guenter Roeck wrote:
>> On 09/21/2013 04:30 PM, Eduardo Valentin wrote:
>>> On 21-09-2013 14:06, Guenter Roeck wrote:
>>>> On 09/18/2013 09:21 AM, Eduardo Valentin wrote:
>>>>> This patch adds to lm75 temperature sensor the possibility
>>>>> to expose itself as thermal zone device, registered on the
>>>>> thermal framework.
>>>>>
>>>>> The thermal zone is built only if a device tree node
>>>>> describing a thermal zone for this sensor is present
>>>>> inside the lm75 DT node. Otherwise, the driver behavior
>>>>> will be the same.
>>>>>
>>>>> Cc: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
>>>>> Cc: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
>>>>> Cc: lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
>>>>> Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>>>>> Signed-off-by: Eduardo Valentin <eduardo.valentin-l0cyMroinI0@public.gmane.org>
>>>>
>>>> Acked-by: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
>>>>
>>>
>>> Cool! thanks again for taking the time to review this.
>>>
>>>> I assume this will be sent upstream through the thermal tree ?
>>>
>>> Yeah, that is the idea, at least for the core part. The hwmon changes I
>>> believe goes via hwmon tree, right?
>>>
>>
>> Not necessarily, as the hwmon code depends on the core code.
>> In such cases it is quite common that both are sent through the same tree.
>
> If this works for you I can queue these changes via the thermal tree.
>
Ok with me.
Guenter
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <linux@roeck-us.net>
To: Eduardo Valentin <eduardo.valentin@ti.com>
Cc: swarren@wwwdotorg.org, pawel.moll@arm.com, mark.rutland@arm.com,
ian.campbell@citrix.com, rob.herring@calxeda.com,
rui.zhang@intel.com, wni@nvidia.com, grant.likely@linaro.org,
durgadoss.r@intel.com, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, lm-sensors@lm-sensors.org,
linux-kernel@vger.kernel.org, Jean Delvare <khali@linux-fr.org>
Subject: Re: [lm-sensors] [PATCHv3 05/16] hwmon: lm75: expose to thermal fw via DT nodes
Date: Sun, 22 Sep 2013 02:24:55 +0000 [thread overview]
Message-ID: <523E54F7.9010403@roeck-us.net> (raw)
In-Reply-To: <523E388F.80707@ti.com>
On 09/21/2013 05:23 PM, Eduardo Valentin wrote:
> On 21-09-2013 19:56, Guenter Roeck wrote:
>> On 09/21/2013 04:30 PM, Eduardo Valentin wrote:
>>> On 21-09-2013 14:06, Guenter Roeck wrote:
>>>> On 09/18/2013 09:21 AM, Eduardo Valentin wrote:
>>>>> This patch adds to lm75 temperature sensor the possibility
>>>>> to expose itself as thermal zone device, registered on the
>>>>> thermal framework.
>>>>>
>>>>> The thermal zone is built only if a device tree node
>>>>> describing a thermal zone for this sensor is present
>>>>> inside the lm75 DT node. Otherwise, the driver behavior
>>>>> will be the same.
>>>>>
>>>>> Cc: Jean Delvare <khali@linux-fr.org>
>>>>> Cc: Guenter Roeck <linux@roeck-us.net>
>>>>> Cc: lm-sensors@lm-sensors.org
>>>>> Cc: linux-kernel@vger.kernel.org
>>>>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
>>>>
>>>> Acked-by: Guenter Roeck <linux@roeck-us.net>
>>>>
>>>
>>> Cool! thanks again for taking the time to review this.
>>>
>>>> I assume this will be sent upstream through the thermal tree ?
>>>
>>> Yeah, that is the idea, at least for the core part. The hwmon changes I
>>> believe goes via hwmon tree, right?
>>>
>>
>> Not necessarily, as the hwmon code depends on the core code.
>> In such cases it is quite common that both are sent through the same tree.
>
> If this works for you I can queue these changes via the thermal tree.
>
Ok with me.
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <linux@roeck-us.net>
To: Eduardo Valentin <eduardo.valentin@ti.com>
Cc: swarren@wwwdotorg.org, pawel.moll@arm.com, mark.rutland@arm.com,
ian.campbell@citrix.com, rob.herring@calxeda.com,
rui.zhang@intel.com, wni@nvidia.com, grant.likely@linaro.org,
durgadoss.r@intel.com, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, lm-sensors@lm-sensors.org,
linux-kernel@vger.kernel.org, Jean Delvare <khali@linux-fr.org>
Subject: Re: [PATCHv3 05/16] hwmon: lm75: expose to thermal fw via DT nodes
Date: Sat, 21 Sep 2013 19:24:55 -0700 [thread overview]
Message-ID: <523E54F7.9010403@roeck-us.net> (raw)
In-Reply-To: <523E388F.80707@ti.com>
On 09/21/2013 05:23 PM, Eduardo Valentin wrote:
> On 21-09-2013 19:56, Guenter Roeck wrote:
>> On 09/21/2013 04:30 PM, Eduardo Valentin wrote:
>>> On 21-09-2013 14:06, Guenter Roeck wrote:
>>>> On 09/18/2013 09:21 AM, Eduardo Valentin wrote:
>>>>> This patch adds to lm75 temperature sensor the possibility
>>>>> to expose itself as thermal zone device, registered on the
>>>>> thermal framework.
>>>>>
>>>>> The thermal zone is built only if a device tree node
>>>>> describing a thermal zone for this sensor is present
>>>>> inside the lm75 DT node. Otherwise, the driver behavior
>>>>> will be the same.
>>>>>
>>>>> Cc: Jean Delvare <khali@linux-fr.org>
>>>>> Cc: Guenter Roeck <linux@roeck-us.net>
>>>>> Cc: lm-sensors@lm-sensors.org
>>>>> Cc: linux-kernel@vger.kernel.org
>>>>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
>>>>
>>>> Acked-by: Guenter Roeck <linux@roeck-us.net>
>>>>
>>>
>>> Cool! thanks again for taking the time to review this.
>>>
>>>> I assume this will be sent upstream through the thermal tree ?
>>>
>>> Yeah, that is the idea, at least for the core part. The hwmon changes I
>>> believe goes via hwmon tree, right?
>>>
>>
>> Not necessarily, as the hwmon code depends on the core code.
>> In such cases it is quite common that both are sent through the same tree.
>
> If this works for you I can queue these changes via the thermal tree.
>
Ok with me.
Guenter
next prev parent reply other threads:[~2013-09-22 2:24 UTC|newest]
Thread overview: 189+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-15 22:02 [PATCH 00/16] device thermal limits represented in device tree nodes (v3) Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
[not found] ` <1379282563-14650-1-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-09-15 22:02 ` [PATCH 01/16] drivers: thermal: allow registering without .get_temp Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 02/16] drivers: thermal: introduce device tree parser Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
2013-09-18 16:03 ` [PATCHv2 " Eduardo Valentin
2013-09-18 16:03 ` Eduardo Valentin
2013-09-18 16:03 ` [lm-sensors] " Eduardo Valentin
2013-09-18 17:08 ` Guenter Roeck
2013-09-18 17:08 ` [lm-sensors] " Guenter Roeck
[not found] ` <20130918170840.GA14830-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-09-18 18:54 ` Eduardo Valentin
2013-09-18 18:54 ` Eduardo Valentin
2013-09-18 18:54 ` [lm-sensors] " Eduardo Valentin
2013-09-18 19:02 ` [PATCHv3 " Eduardo Valentin
2013-09-18 19:02 ` Eduardo Valentin
2013-09-18 19:02 ` [lm-sensors] " Eduardo Valentin
2013-09-18 19:11 ` Joe Perches
2013-09-18 19:11 ` [lm-sensors] " Joe Perches
2013-09-18 19:44 ` Eduardo Valentin
2013-09-18 19:44 ` Eduardo Valentin
2013-09-18 19:44 ` [lm-sensors] " Eduardo Valentin
2013-09-18 19:59 ` Joe Perches
2013-09-18 19:59 ` [lm-sensors] " Joe Perches
2013-09-18 20:04 ` Eduardo Valentin
2013-09-18 20:04 ` Eduardo Valentin
2013-09-18 20:04 ` [lm-sensors] " Eduardo Valentin
2013-09-18 20:31 ` [PATCHv4 " Eduardo Valentin
2013-09-18 20:31 ` Eduardo Valentin
2013-09-18 20:31 ` [lm-sensors] " Eduardo Valentin
2013-09-18 20:44 ` Joe Perches
2013-09-18 20:44 ` [lm-sensors] " Joe Perches
2013-09-18 20:52 ` Eduardo Valentin
2013-09-18 20:52 ` Eduardo Valentin
2013-09-18 20:52 ` [lm-sensors] " Eduardo Valentin
2013-09-18 21:00 ` Joe Perches
2013-09-18 21:00 ` [lm-sensors] " Joe Perches
2013-09-18 21:07 ` Eduardo Valentin
2013-09-18 21:07 ` Eduardo Valentin
2013-09-18 21:07 ` [lm-sensors] " Eduardo Valentin
2013-09-18 20:57 ` [PATCHv5 " Eduardo Valentin
2013-09-18 20:57 ` Eduardo Valentin
2013-09-18 20:57 ` [lm-sensors] " Eduardo Valentin
2013-09-18 21:04 ` Joe Perches
2013-09-18 21:04 ` [lm-sensors] " Joe Perches
2013-09-18 21:22 ` Eduardo Valentin
2013-09-18 21:22 ` Eduardo Valentin
2013-09-18 21:22 ` [lm-sensors] " Eduardo Valentin
2013-09-18 21:35 ` [PATCHv6 " Eduardo Valentin
2013-09-18 21:35 ` Eduardo Valentin
2013-09-18 21:35 ` [lm-sensors] " Eduardo Valentin
2013-09-23 10:40 ` Mark Rutland
2013-09-23 10:40 ` [lm-sensors] " Mark Rutland
2013-09-23 15:39 ` Eduardo Valentin
2013-09-23 15:39 ` [lm-sensors] " Eduardo Valentin
2013-09-24 8:11 ` Hongbo Zhang
2013-09-24 8:11 ` [lm-sensors] " Hongbo Zhang
2013-09-24 15:50 ` Eduardo Valentin
2013-09-24 15:50 ` [lm-sensors] " Eduardo Valentin
2013-09-25 5:39 ` Hongbo Zhang
2013-09-25 5:39 ` [lm-sensors] " Hongbo Zhang
2013-09-25 14:23 ` Eduardo Valentin
2013-09-25 14:23 ` [lm-sensors] " Eduardo Valentin
2013-09-24 21:33 ` Eduardo Valentin
2013-09-24 21:33 ` [lm-sensors] " Eduardo Valentin
2013-09-30 15:40 ` Mark Rutland
2013-09-30 15:40 ` [lm-sensors] " Mark Rutland
2013-09-25 7:13 ` Hongbo Zhang
2013-09-25 7:13 ` Hongbo Zhang
2013-09-25 7:13 ` [lm-sensors] " Hongbo Zhang
2013-09-25 14:15 ` Eduardo Valentin
2013-09-25 14:15 ` Eduardo Valentin
2013-09-25 14:15 ` [lm-sensors] " Eduardo Valentin
2013-10-08 8:45 ` Hongbo Zhang
2013-10-08 8:45 ` Hongbo Zhang
2013-10-08 8:45 ` [lm-sensors] " Hongbo Zhang
2013-10-08 14:25 ` Eduardo Valentin
2013-10-08 14:25 ` Eduardo Valentin
2013-10-08 14:25 ` [lm-sensors] " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 07/16] thermal: ti-soc-thermal: use thermal DT infrastructure Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 03/16] drivers: thermal: cpu_cooling: introduce of_cpufreq_cooling_register Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 04/16] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 05/16] hwmon: lm75: expose to thermal fw via DT nodes Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
[not found] ` <1379282563-14650-6-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-09-15 23:22 ` Guenter Roeck
2013-09-15 23:22 ` Guenter Roeck
2013-09-15 23:22 ` [lm-sensors] " Guenter Roeck
[not found] ` <5236411E.6040204-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-09-17 22:35 ` [PATCHv2 " Eduardo Valentin
2013-09-17 22:35 ` Eduardo Valentin
2013-09-17 22:35 ` [lm-sensors] " Eduardo Valentin
2013-09-18 16:21 ` [PATCHv3 " Eduardo Valentin
2013-09-18 16:21 ` Eduardo Valentin
2013-09-18 16:21 ` [lm-sensors] " Eduardo Valentin
2013-09-21 18:06 ` Guenter Roeck
2013-09-21 18:06 ` [lm-sensors] " Guenter Roeck
2013-09-21 23:30 ` Eduardo Valentin
2013-09-21 23:30 ` Eduardo Valentin
2013-09-21 23:30 ` [lm-sensors] " Eduardo Valentin
[not found] ` <523E2C1B.9010307-l0cyMroinI0@public.gmane.org>
2013-09-21 23:56 ` Guenter Roeck
2013-09-21 23:56 ` Guenter Roeck
2013-09-21 23:56 ` [lm-sensors] " Guenter Roeck
2013-09-22 0:23 ` Eduardo Valentin
2013-09-22 0:23 ` Eduardo Valentin
2013-09-22 0:23 ` [lm-sensors] " Eduardo Valentin
[not found] ` <523E388F.80707-l0cyMroinI0@public.gmane.org>
2013-09-22 2:24 ` Guenter Roeck [this message]
2013-09-22 2:24 ` Guenter Roeck
2013-09-22 2:24 ` [lm-sensors] " Guenter Roeck
2013-09-15 22:02 ` [PATCH 06/16] hwmon: tmp102: " Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
[not found] ` <1379282563-14650-7-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-09-15 23:33 ` Guenter Roeck
2013-09-15 23:33 ` Guenter Roeck
2013-09-15 23:33 ` [lm-sensors] " Guenter Roeck
[not found] ` <523643D4.30208-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-09-17 22:29 ` Eduardo Valentin
2013-09-17 22:29 ` Eduardo Valentin
2013-09-17 22:29 ` [lm-sensors] " Eduardo Valentin
[not found] ` <20130918111849.GA9148@roeck-us.net>
[not found] ` <20130918111849.GA9148-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-09-18 14:29 ` Eduardo Valentin
2013-09-18 14:29 ` Eduardo Valentin
[not found] ` <5239B8B5.6050702-l0cyMroinI0@public.gmane.org>
2013-09-18 15:17 ` [lm-sensors] " Guenter Roeck
2013-09-18 15:17 ` Guenter Roeck
[not found] ` <20130918151746.GA17065-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-09-18 15:54 ` [lm-sensors] " Eduardo Valentin
2013-09-18 15:54 ` Eduardo Valentin
[not found] ` <5239CCAA.7030505-l0cyMroinI0@public.gmane.org>
2013-09-18 15:57 ` [lm-sensors] " Guenter Roeck
2013-09-18 15:57 ` Guenter Roeck
[not found] ` <20130918155732.GA17160-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-09-18 16:23 ` [lm-sensors] " Eduardo Valentin
2013-09-18 16:23 ` Eduardo Valentin
[not found] ` <5239D383.50009-l0cyMroinI0@public.gmane.org>
2013-09-18 17:08 ` [lm-sensors] " Guenter Roeck
2013-09-18 17:08 ` Guenter Roeck
2013-09-17 22:34 ` [PATCHv2 " Eduardo Valentin
2013-09-17 22:34 ` Eduardo Valentin
2013-09-17 22:34 ` [lm-sensors] " Eduardo Valentin
[not found] ` <1379457245-17810-1-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-09-18 11:06 ` Guenter Roeck
2013-09-18 11:06 ` Guenter Roeck
2013-09-18 11:06 ` [lm-sensors] " Guenter Roeck
[not found] ` <20130918110649.GA9050-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-09-18 14:17 ` Eduardo Valentin
2013-09-18 14:17 ` Eduardo Valentin
2013-09-18 14:17 ` [lm-sensors] " Eduardo Valentin
2013-09-18 16:23 ` [PATCH " Eduardo Valentin
2013-09-18 16:23 ` Eduardo Valentin
2013-09-18 16:23 ` [lm-sensors] " Eduardo Valentin
[not found] ` <1379521390-17404-1-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-09-21 18:07 ` Guenter Roeck
2013-09-21 18:07 ` Guenter Roeck
2013-09-21 18:07 ` [lm-sensors] " Guenter Roeck
2013-09-15 22:02 ` [PATCH 08/16] arm: dts: add omap4 CPU thermal data Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 09/16] arm: dts: add omap4430 " Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 10/16] arm: dts: add omap4460 " Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 11/16] arm: dts: add cooling properties on omap4430 cpu node Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 12/16] arm: dts: add cooling properties on omap4460 " Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 13/16] arm: dts: add omap5 GPU thermal data Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 14/16] arm: dts: add omap5 CORE " Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 15/16] arm: dts: add omap5 " Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 16/16] arm: dts: add cooling properties on omap5 cpu node Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` Eduardo Valentin
2013-09-15 22:02 ` [lm-sensors] " Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=523E54F7.9010403@roeck-us.net \
--to=linux-0h96xk9xttrk1umjsbkqmq@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=durgadoss.r-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=eduardo.valentin-l0cyMroinI0@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=ian.campbell-Sxgqhf6Nn4DQT0dZR+AlfA@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.