From: Joachim Meyer <Jogi95@web.de>
To: Grant Likely <grant.likely@secretlab.ca>
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: Linux for ml310
Date: Wed, 09 Jan 2008 18:29:40 +0100 [thread overview]
Message-ID: <524275432@web.de> (raw)
Hi again
In which xparams* files should i look for the right definition=3F
In the xparameters.h from the BSP I can't find it, it looks like this:
-------------------------------------------------------------------
/*
* include/asm-ppc/xparameters.h
*
* This file includes the correct xparameters.h for the CONFIG'ed board
*
* Author: MontaVista Software, Inc.
* source@mvista.com
*
* 2004 (c) MontaVista Software, Inc. This file is licensed under the ter=
ms
* of the GNU General Public License version 2. This program is licensed
* "as is" without any warranty of any kind, whether express or implied.
*/
#include <linux/config.h>
#if defined(CONFIG=5FXILINX=5FML300)
#include <platforms/4xx/xparameters/xparameters=5Fml300.h>
#endif
#if defined(CONFIG=5FXILINX=5FML40x)
#include <platforms/4xx/xparameters/xparameters=5Fml40x.h>
#endif
#if defined(CONFIG=5FMEMEC=5F2VPX)
#include <platforms/4xx/xparameters/xparameters=5F2vpx.h>
#endif
/*
* A few reasonable defaults for the #defines which could be missing depen=
ding
* on the IP version or variant (e.g. OPB vs PLB)
*/
#ifndef XPAR=5FEMAC=5F0=5FCAM=5FEXIST
#define XPAR=5FEMAC=5F0=5FCAM=5FEXIST 0
#endif
#ifndef XPAR=5FEMAC=5F0=5FJUMBO=5FEXIST
#define XPAR=5FEMAC=5F0=5FJUMBO=5FEXIST 0
#endif
#ifndef XPAR=5FEMAC=5F0=5FTX=5FDRE=5FTYPE
#define XPAR=5FEMAC=5F0=5FTX=5FDRE=5FTYPE 0
#endif
#ifndef XPAR=5FEMAC=5F0=5FRX=5FDRE=5FTYPE
#define XPAR=5FEMAC=5F0=5FRX=5FDRE=5FTYPE 0
#endif
#ifndef XPAR=5FEMAC=5F0=5FTX=5FINCLUDE=5FCSUM
#define XPAR=5FEMAC=5F0=5FTX=5FINCLUDE=5FCSUM 0
#endif
#ifndef XPAR=5FEMAC=5F0=5FRX=5FINCLUDE=5FCSUM
#define XPAR=5FEMAC=5F0=5FRX=5FINCLUDE=5FCSUM 0
#endif
#ifndef XPAR=5FEMAC=5F1=5FCAM=5FEXIST
#define XPAR=5FEMAC=5F1=5FCAM=5FEXIST 0
#endif
#ifndef XPAR=5FEMAC=5F1=5FJUMBO=5FEXIST
#define XPAR=5FEMAC=5F1=5FJUMBO=5FEXIST 0
#endif
#ifndef XPAR=5FEMAC=5F1=5FTX=5FDRE=5FTYPE
#define XPAR=5FEMAC=5F1=5FTX=5FDRE=5FTYPE 0
#endif
#ifndef XPAR=5FEMAC=5F1=5FRX=5FDRE=5FTYPE
#define XPAR=5FEMAC=5F1=5FRX=5FDRE=5FTYPE 0
#endif
#ifndef XPAR=5FEMAC=5F1=5FTX=5FINCLUDE=5FCSUM
#define XPAR=5FEMAC=5F1=5FTX=5FINCLUDE=5FCSUM 0
#endif
#ifndef XPAR=5FEMAC=5F1=5FRX=5FINCLUDE=5FCSUM
#define XPAR=5FEMAC=5F1=5FRX=5FINCLUDE=5FCSUM 0
#endif
#ifndef XPAR=5FGPIO=5F0=5FIS=5FDUAL
#define XPAR=5FGPIO=5F0=5FIS=5FDUAL 0
#endif
#ifndef XPAR=5FGPIO=5F1=5FIS=5FDUAL
#define XPAR=5FGPIO=5F1=5FIS=5FDUAL 0
#endif
#ifndef XPAR=5FGPIO=5F2=5FIS=5FDUAL
#define XPAR=5FGPIO=5F2=5FIS=5FDUAL 0
#endif
#ifndef XPAR=5FGPIO=5F3=5FIS=5FDUAL
#define XPAR=5FGPIO=5F3=5FIS=5FDUAL 0
#endif
#ifndef XPAR=5FGPIO=5F4=5FIS=5FDUAL
#define XPAR=5FGPIO=5F4=5FIS=5FDUAL 0
#endif
----------------------------------------------------
Did I something wrong in the edk Projekt, or are there other xparameters w=
here I must look=3F
Greetings & THX
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F
Jetzt neu! Sch=FCtzen Sie Ihren PC mit McAfee und WEB.DE. 30 Tage
kostenlos testen. http://www.pc-sicherheit.web.de/startseite/=3Fmc=3D022220
next reply other threads:[~2008-01-09 17:32 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-09 17:29 Joachim Meyer [this message]
2008-01-09 18:07 ` Linux for ml310 Grant Likely
-- strict thread matches above, loose matches on Subject: below --
2008-01-11 11:40 Enno Lübbers
2008-01-10 15:44 Joachim Meyer
2008-01-10 15:48 ` Grant Likely
2008-01-10 10:13 Joachim Meyer
2008-01-10 14:54 ` Grant Likely
2008-01-09 19:00 Joachim Meyer
2008-01-09 19:16 ` Grant Likely
[not found] <524178230@web.de>
2008-01-09 16:48 ` Grant Likely
2008-01-09 15:19 Joachim Meyer
2008-01-09 15:24 ` Grant Likely
2008-01-07 20:41 Joachim Meyer
2008-01-07 21:02 ` Grant Likely
2008-01-09 21:29 ` Joachim Meyer
2008-01-09 22:10 ` Grant Likely
2008-01-14 18:42 ` greenlean
2008-01-14 18:47 ` Stephen Neuendorffer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=524275432@web.de \
--to=jogi95@web.de \
--cc=grant.likely@secretlab.ca \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.