From: Jack Wang <xjtuwjp@gmail.com>
To: Anand <anandkumar_santhanam@pmc-sierra.com>
Cc: linux-scsi@vger.kernel.org, Sangeetha.Gnanasekaran@pmcs.com,
Nikith.Ganigarakoppal@pmcs.com, Viswas.G@pmcs.com
Subject: Re: [PATCH V2 08/10] pm80xx: Queue rotation logic for inbound and outbound queues
Date: Thu, 26 Sep 2013 09:08:02 +0200 [thread overview]
Message-ID: <5243DD52.7010304@gmail.com> (raw)
In-Reply-To: <5243C8D8.5090505@pmc-sierra.com>
On 09/26/2013 07:40 AM, Anand wrote:
> From 678d8085ace7c471dc140420c41dc4ad70300d60 Mon Sep 17 00:00:00 2001
> From: Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>
> Date: Wed, 18 Sep 2013 11:12:59 +0530
> Subject: [PATCH V2 08/10] pm80xx: Queue rotation logic for inbound and outbound queues.
>
> Signed-off-by: Anandkumar.Santhanam@pmcs.com
>
I'd like to know the number of this improved for performance?
Jack
> ---
> drivers/scsi/pm8001/pm80xx_hwi.c | 31 +++++++++++++------------------
> 1 files changed, 13 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
> index 80a10aa..ce59d0d 100644
> --- a/drivers/scsi/pm8001/pm80xx_hwi.c
> +++ b/drivers/scsi/pm8001/pm80xx_hwi.c
> @@ -3715,8 +3715,7 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
> int ret;
> u64 phys_addr;
> struct inbound_queue_table *circularQ;
> - static u32 inb;
> - static u32 outb;
> + u32 q_index;
> u32 opc = OPC_INB_SSPINIIOSTART;
> memset(&ssp_cmd, 0, sizeof(ssp_cmd));
> memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8);
> @@ -3735,7 +3734,8 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
> ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
> memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cmd->cmnd,
> task->ssp_task.cmd->cmd_len);
> - circularQ = &pm8001_ha->inbnd_q_tbl[0];
> + q_index = (u32) (pm8001_dev->id & 0x00ffffff) % PM8001_MAX_INB_NUM;
> + circularQ = &pm8001_ha->inbnd_q_tbl[q_index];
>
> /* Check if encryption is set */
> if (pm8001_ha->chip->encrypt &&
> @@ -3783,7 +3783,7 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
> } else {
> PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> "Sending Normal SAS command 0x%x inb q %x\n",
> - task->ssp_task.cmd->cmnd[0], inb));
> + task->ssp_task.cmd->cmnd[0], q_index));
> /* fill in PRD (scatter/gather) table, if any */
> if (task->num_scatter > 1) {
> pm8001_chip_make_sg(task->scatter, ccb->n_elem,
> @@ -3809,11 +3809,9 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
> ssp_cmd.esgl = 0;
> }
> }
> - ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &ssp_cmd, outb++);
> -
> - /* rotate the outb queue */
> - outb = outb%PM8001_MAX_SPCV_OUTB_NUM;
> -
> + q_index = (u32) (pm8001_dev->id & 0x00ffffff) % PM8001_MAX_OUTB_NUM;
> + ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc,
> + &ssp_cmd, q_index);
> return ret;
> }
>
> @@ -3825,8 +3823,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
> struct pm8001_device *pm8001_ha_dev = dev->lldd_dev;
> u32 tag = ccb->ccb_tag;
> int ret;
> - static u32 inb;
> - static u32 outb;
> + u32 q_index;
> struct sata_start_req sata_cmd;
> u32 hdr_tag, ncg_tag = 0;
> u64 phys_addr;
> @@ -3836,7 +3833,8 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
> unsigned long flags;
> u32 opc = OPC_INB_SATA_HOST_OPSTART;
> memset(&sata_cmd, 0, sizeof(sata_cmd));
> - circularQ = &pm8001_ha->inbnd_q_tbl[0];
> + q_index = (u32) (pm8001_ha_dev->id & 0x00ffffff) % PM8001_MAX_INB_NUM;
> + circularQ = &pm8001_ha->inbnd_q_tbl[q_index];
>
> if (task->data_dir == PCI_DMA_NONE) {
> ATAP = 0x04; /* no data*/
> @@ -3917,7 +3915,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
> } else {
> PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> "Sending Normal SATA command 0x%x inb %x\n",
> - sata_cmd.sata_fis.command, inb));
> + sata_cmd.sata_fis.command, q_index));
> /* dad (bit 0-1) is 0 */
> sata_cmd.ncqtag_atap_dir_m_dad =
> cpu_to_le32(((ncg_tag & 0xff)<<16) |
> @@ -4014,12 +4012,9 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
> }
> }
> }
> -
> + q_index = (u32) (pm8001_ha_dev->id & 0x00ffffff) % PM8001_MAX_OUTB_NUM;
> ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc,
> - &sata_cmd, outb++);
> -
> - /* rotate the outb queue */
> - outb = outb%PM8001_MAX_SPCV_OUTB_NUM;
> + &sata_cmd, q_index);
> return ret;
> }
>
>
next prev parent reply other threads:[~2013-09-26 7:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-26 5:40 [PATCH V2 08/10] pm80xx: Queue rotation logic for inbound and outbound queues Anand
2013-09-26 7:08 ` Jack Wang [this message]
2013-09-26 9:09 ` Sangeetha Gnanasekaran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5243DD52.7010304@gmail.com \
--to=xjtuwjp@gmail.com \
--cc=Nikith.Ganigarakoppal@pmcs.com \
--cc=Sangeetha.Gnanasekaran@pmcs.com \
--cc=Viswas.G@pmcs.com \
--cc=anandkumar_santhanam@pmc-sierra.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.