From: Ding Tianhong <dingtianhong@huawei.com>
To: Jay Vosburgh <fubar@us.ibm.com>,
Andy Gospodarek <andy@greyhouse.net>,
"David S. Miller" <davem@davemloft.net>,
Nikolay Aleksandrov <nikolay@redhat.com>,
Veaceslav Falico <vfalico@redhat.com>,
Netdev <netdev@vger.kernel.org>
Subject: [PATCH net-next 2/4] bonding: use RCU protection for alb xmit path
Date: Sun, 29 Sep 2013 19:45:05 +0800 [thread overview]
Message-ID: <524812C1.6070407@huawei.com> (raw)
The commit 278b20837511776dc9d5f6ee1c7fabd5479838bb
(bonding: initial RCU conversion) has convert the roundrobin,
active-backup, broadcast and xor xmit path to rcu protection,
the performance will be better for these mode, so this time,
convert xmit path for alb mode.
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: Nikolay Aleksandrov <nikolay@redhat.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
---
drivers/net/bonding/bond_alb.c | 23 +++++++++--------------
drivers/net/bonding/bonding.h | 2 +-
2 files changed, 10 insertions(+), 15 deletions(-)
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index e960418..a1444d5 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -230,7 +230,7 @@ static struct slave *tlb_get_least_loaded_slave(struct bonding *bond)
max_gap = LLONG_MIN;
/* Find the slave with the largest gap */
- bond_for_each_slave(bond, slave, iter) {
+ bond_for_each_slave_rcu(bond, slave, iter) {
if (SLAVE_IS_OK(slave)) {
long long gap = compute_gap(slave);
@@ -387,7 +387,7 @@ static struct slave *rlb_next_rx_slave(struct bonding *bond)
struct list_head *iter;
bool found = false;
- bond_for_each_slave(bond, slave, iter) {
+ bond_for_each_slave_rcu(bond, slave, iter) {
if (!SLAVE_IS_OK(slave))
continue;
if (!found) {
@@ -628,12 +628,14 @@ static struct slave *rlb_choose_channel(struct sk_buff *skb, struct bonding *bon
{
struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
struct arp_pkt *arp = arp_pkt(skb);
- struct slave *assigned_slave;
+ struct slave *assigned_slave, *curr_active_slave;
struct rlb_client_info *client_info;
u32 hash_index = 0;
_lock_rx_hashtbl(bond);
+ curr_active_slave = rcu_dereference(bond->curr_active_slave);
+
hash_index = _simple_hash((u8 *)&arp->ip_dst, sizeof(arp->ip_dst));
client_info = &(bond_info->rx_hashtbl[hash_index]);
@@ -658,8 +660,8 @@ static struct slave *rlb_choose_channel(struct sk_buff *skb, struct bonding *bon
* that the new client can be assigned to this entry.
*/
if (bond->curr_active_slave &&
- client_info->slave != bond->curr_active_slave) {
- client_info->slave = bond->curr_active_slave;
+ client_info->slave != curr_active_slave) {
+ client_info->slave = curr_active_slave;
rlb_update_client(client_info);
}
}
@@ -1343,11 +1345,6 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
skb_reset_mac_header(skb);
eth_data = eth_hdr(skb);
- /* make sure that the curr_active_slave do not change during tx
- */
- read_lock(&bond->lock);
- read_lock(&bond->curr_slave_lock);
-
switch (ntohs(skb->protocol)) {
case ETH_P_IP: {
const struct iphdr *iph = ip_hdr(skb);
@@ -1429,12 +1426,12 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
if (!tx_slave) {
/* unbalanced or unassigned, send through primary */
- tx_slave = bond->curr_active_slave;
+ tx_slave = rcu_dereference(bond->curr_active_slave);
bond_info->unbalanced_load += skb->len;
}
if (tx_slave && SLAVE_IS_OK(tx_slave)) {
- if (tx_slave != bond->curr_active_slave) {
+ if (tx_slave != rcu_dereference(bond->curr_active_slave)) {
memcpy(eth_data->h_source,
tx_slave->dev->dev_addr,
ETH_ALEN);
@@ -1449,8 +1446,6 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
}
}
- read_unlock(&bond->curr_slave_lock);
- read_unlock(&bond->lock);
if (res) {
/* no suitable interface, frame not sent */
kfree_skb(skb);
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 713b6af..1c7d559 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -459,7 +459,7 @@ static inline struct slave *bond_slave_has_mac(struct bonding *bond,
struct list_head *iter;
struct slave *tmp;
- bond_for_each_slave(bond, tmp, iter)
+ bond_for_each_slave_rcu(bond, tmp, iter)
if (ether_addr_equal_64bits(mac, tmp->dev->dev_addr))
return tmp;
--
1.8.2.1
next reply other threads:[~2013-09-29 11:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-29 11:45 Ding Tianhong [this message]
2013-09-30 10:52 ` [PATCH net-next 2/4] bonding: use RCU protection for alb xmit path Veaceslav Falico
2013-09-30 11:19 ` Ding Tianhong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=524812C1.6070407@huawei.com \
--to=dingtianhong@huawei.com \
--cc=andy@greyhouse.net \
--cc=davem@davemloft.net \
--cc=fubar@us.ibm.com \
--cc=netdev@vger.kernel.org \
--cc=nikolay@redhat.com \
--cc=vfalico@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.