[PATCH v5 0/2] iio: cm36651: Add CM36651 proximity/light sensor

[Beomho Seo <beomho.seo@samsung.com>]

Hello all,

Thank you for your advices. I have revised some minor issues of v4 revision.

This patch is the fifth revision for Capella CM36651 proximity and RGB light sensor driver.
The driver exposes five channnels: Red, Green, Clear and proximity.
It also support detection proximity event.

This dricer supports:
	- Event: rising and falling proximity events.
	- Reading channel through read_raw callback.
	- Writing sensor data integration time each channel through write_raw callback.

v5 changed below:
	- Use *_REG_NUM macro at size of array.
	- Revise error handling in probe function.

Subject: [PATCH 0/2] *** SUBJECT HERE ***

*** BLURB HERE ***

Beomho Seo (2):
  iio: cm36651: Add CM36651 proximity light/sensor driver
  DT: Add documentation for cm36651 proximity/light sensor

 .../devicetree/bindings/iio/light/cm36651.txt      |   26 +
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 drivers/iio/light/Kconfig                          |   11 +
 drivers/iio/light/cm36651.c                        |  706 ++++++++++++++++++++
 4 files changed, 744 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/light/cm36651.txt
 create mode 100644 drivers/iio/light/cm36651.c

-- 
1.7.9.5


-- 

Best Regards,

Beomho Seo, Assistant Engineer
System S/W Lab., S/W Platform Team, Software Center
Samsung Electronics