From: Daiane Angolini <daiane.angolini@freescale.com>
To: jojo <rjiejie@gmail.com>, <meta-freescale@yoctoproject.org>
Subject: Re: 回复： build error of u-boot on branch dora
Date: Tue, 1 Oct 2013 10:36:50 -0300 [thread overview]
Message-ID: <524ACFF2.6070102@freescale.com> (raw)
In-Reply-To: <524ACFAD.6040905@freescale.com>
On 10/01/2013 10:35 AM, Daiane Angolini wrote:
> On 10/01/2013 09:28 AM, jojo wrote:
>> Hi,
>> No none meets this issue of u-boot-fslc in the dora branch ?
>
> I did not faced exactly the same you did, but I got an error:
>
>
> | make[1]: *** No rule to make target `.depend', needed by `libvideo.o'.
> Stop.
> | make[1]: Leaving directory
> `/home/daiane/fsl-community-bsp/build/tmp/work/imx6qsabresd-poky-linux-gnueabi/u-boot-fslc/v2013.10-r0/git/drivers/video'
>
> | make: *** [drivers/video/libvideo.o] Error 2
>
> (...)
>
> cmd_source.o cmd_test.o cmd_version.o cmd_ximg.o command.o console.o
> dlmalloc.o env_attr.o env_callback.o env_common.o env_flags.o env_mmc.o
> exports.o fdt_support.o flash.o hash.o hush.o image-fdt.o image.o main.o
> memsize.o miiphyutil.o s_record.o splash.o stdio.o xyzModem.o
> | make[1]: Leaving directory
> `/home/daiane/fsl-community-bsp/build/tmp/work/imx6qsabresd-poky-linux-gnueabi/u-boot-fslc/v2013.10-r0/git/common'
>
> | ERROR: oe_runmake failed
> | WARNING: exit code 1 from a shell command.
> | ERROR: Function failed: do_compile (log file is located at
> /home/daiane/fsl-community-bsp/build/tmp/work/imx6qsabresd-poky-linux-gnueabi/u-boot-fslc/v2013.10-r0/temp/log.do_compile.18554)
>
> ERROR: Task 87
> (/home/daiane/fsl-community-bsp/sources/meta-fsl-arm/recipes-bsp/u-boot/u-boot-fslc_2013.10.bb,
> do_compile) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 1930 tasks of which 233 didn't need to be
> rerun and 1 failed.
ops, just found exactly the same:
i/gcc/arm-poky-linux-gnueabi/4.8.1/include -pipe -DCONFIG_ARM -D__ARM__
-marm -mno-thumb-interwork -mabi=aapcs-linux -march=armv7-a -MQ
imx_watchdog.o imx_watchdog.c >.depend.imx_watchdog
| cfb_console.c:270:22: fatal error: bmp_logo.h: No such file or directory
| #include <bmp_logo.h>
| ^
>
>
>
> Daiane
>
>>
>> Help ….
>>
>> Thanks,
>>
>> - Jojo
>>
>> 在 2013年10月1日星期二，下午6:54，jojo 写道：
>>
>>> Hi,
>>> Also can not find the mkimage tool :(
>>>
>>> .o --end-group
>>> /home/jojo/worl/freescale/fsl-community-bsp-dora/build/tmp/work/imx6qsabresd-poky-linux-gnueabi/u-boot-fslc/v2013.10-r0/git/arch/arm/lib/eabi_compat.o
>>>
>>> -L
>>> /home/jojo/worl/freescale/fsl-community-bsp-dora/build/tmp/sysroots/imx6qsabresd/usr/lib/arm-poky-linux-gnueabi/4.8.1
>>>
>>> -lgcc -Map u-boot.map -o u-boot
>>> | arm-poky-linux-gnueabi-objcopy --gap-fill=0xff -O binary u-boot
>>> u-boot.bin
>>> | make -C
>>> /home/jojo/worl/freescale/fsl-community-bsp-dora/build/tmp/work/imx6qsabresd-poky-linux-gnueabi/u-boot-fslc/v2013.10-r0/git/arch/arm/imx-common
>>>
>>> /home/jojo/worl/freescale/fsl-community-bsp-dora/build/tmp/work/imx6qsabresd-poky-linux-gnueabi/u-boot-fslc/v2013.10-r0/git/u-boot.imx
>>>
>>> | make[1]: Entering directory
>>> `/home/jojo/worl/freescale/fsl-community-bsp-dora/build/tmp/work/imx6qsabresd-poky-linux-gnueabi/u-boot-fslc/v2013.10-r0/git/arch/arm/imx-common'
>>>
>>> |
>>> /home/jojo/worl/freescale/fsl-community-bsp-dora/build/tmp/work/imx6qsabresd-poky-linux-gnueabi/u-boot-fslc/v2013.10-r0/git/tools/mkimage
>>>
>>> -n
>>> /home/jojo/worl/freescale/fsl-community-bsp-dora/build/tmp/work/imx6qsabresd-poky-linux-gnueabi/u-boot-fslc/v2013.10-r0/git/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg.cfgtmp
>>>
>>> -T imximage \
>>> | -e 0x17800000 -d
>>> /home/jojo/worl/freescale/fsl-community-bsp-dora/build/tmp/work/imx6qsabresd-poky-linux-gnueabi/u-boot-fslc/v2013.10-r0/git/u-boot.bin
>>>
>>> /home/jojo/worl/freescale/fsl-community-bsp-dora/build/tmp/work/imx6qsabresd-poky-linux-gnueabi/u-boot-fslc/v2013.10-r0/git/u-boot.imx
>>>
>>> | /bin/bash:
>>> /home/jojo/worl/freescale/fsl-community-bsp-dora/build/tmp/work/imx6qsabresd-poky-linux-gnueabi/u-boot-fslc/v2013.10-r0/git/tools/mkimage:
>>>
>>> No such file or directory
>>> | make[1]: ***
>>> [/home/jojo/worl/freescale/fsl-community-bsp-dora/build/tmp/work/imx6qsabresd-poky-linux-gnueabi/u-boot-fslc/v2013.10-r0/git/u-boot.imx]
>>>
>>> Error 127
>>> | make[1]: Leaving directory
>>> `/home/jojo/worl/freescale/fsl-community-bsp-dora/build/tmp/work/imx6qsabresd-poky-linux-gnueabi/u-boot-fslc/v2013.10-r0/git/arch/arm/imx-common'
>>>
>>> | make: *** [u-boot.imx] Error 2
>>> | ERROR: oe_runmake failed
>>> | WARNING: exit code 1 from a shell command.
>>> | ERROR: Function failed: do_compile (log file is located at
>>> /home/jojo/worl/freescale/fsl-community-bsp-dora/build/tmp/work/imx6qsabresd-poky-linux-gnueabi/u-boot-fslc/v2013.10-r0/temp/log.do_compile.12671)
>>>
>>> ERROR: Task 6
>>> (/home/jojo/worl/freescale/fsl-community-bsp-dora/sources/meta-fsl-arm/recipes-bsp/u-boot/u-boot-fslc_2013.10.bb,
>>>
>>> do_compile) failed with exit code '1'
>>> NOTE: Tasks Summary: Attempted 531 tasks of which 530 didn't need to
>>> be rerun and 1 failed.
>>>
>>> Thanks,
>>>
>>> - Jojo
>>>
>>> 在 2013年10月1日星期二，下午5:25，jojo 写道：
>>>
>>>> cfb_console.c:270:22: fatal error: bmp_logo.h: No such file or
>>>> directory
>>>
>>
>>
>>
>> _______________________________________________
>> meta-freescale mailing list
>> meta-freescale@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-freescale
>>
--
Daiane
next prev parent reply other threads:[~2013-10-01 13:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-01 9:25 build error of u-boot on branch dora jojo
2013-10-01 10:54 ` 回复： uild " jojo
2013-10-01 12:28 ` jojo
2013-10-01 12:41 ` 回复： build " Otavio Salvador
2013-10-01 13:35 ` Daiane Angolini
2013-10-01 13:36 ` Daiane Angolini [this message]
2013-10-01 18:36 ` Otavio Salvador
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=524ACFF2.6070102@freescale.com \
--to=daiane.angolini@freescale.com \
--cc=meta-freescale@yoctoproject.org \
--cc=rjiejie@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.