* Install Kernel Modules in rootfs @ 2013-10-03 12:34 Raul Rosetto Munoz 2013-10-03 12:38 ` Bruce Ashfield 0 siblings, 1 reply; 7+ messages in thread From: Raul Rosetto Munoz @ 2013-10-03 12:34 UTC (permalink / raw) To: yocto@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 435 bytes --] Hello All, I'm Trying to install the kernel modules inside my rootfs but I couldn't find an especific information that help me to do that! I have in my /tmp/images/ the tgz with all the modules that I need. modules--2.6.35.3-r32.23-imx28evk-20131002210958.tgz I just want that this tzg was extracted inside my rootfs /lib/modules. Please some one can help me with this? Thanks so much. -- *Raul Rosetto Muñoz* [-- Attachment #2: Type: text/html, Size: 633 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Install Kernel Modules in rootfs 2013-10-03 12:34 Install Kernel Modules in rootfs Raul Rosetto Munoz @ 2013-10-03 12:38 ` Bruce Ashfield 2013-10-03 13:32 ` Raul Rosetto Munoz 0 siblings, 1 reply; 7+ messages in thread From: Bruce Ashfield @ 2013-10-03 12:38 UTC (permalink / raw) To: Raul Rosetto Munoz, yocto@yoctoproject.org On 13-10-03 08:34 AM, Raul Rosetto Munoz wrote: > Hello All, > > I'm Trying to install the kernel modules inside my rootfs but I couldn't > find an especific information that help me to do that! > > I have in my /tmp/images/ the tgz with all the modules that I need. > > modules--2.6.35.3-r32.23-imx28evk-20131002210958.tgz > > I just want that this tzg was extracted inside my rootfs /lib/modules. > > Please some one can help me with this? Does your image type have a RDEPENDS on "kernel-modules", or do you have IMAGE_INSTALL_append = " kernel-modules", in your local.conf ? If you do either of the above, the entire set of built modules will be installed. You can also install / require individual modules via kernel-module-<module name>. The Yocto docs should have details on this as well. Cheers, Bruce > > Thanks so much. > > -- > *Raul Rosetto Muñoz* > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Install Kernel Modules in rootfs 2013-10-03 12:38 ` Bruce Ashfield @ 2013-10-03 13:32 ` Raul Rosetto Munoz 2013-10-03 13:58 ` Bruce Ashfield 0 siblings, 1 reply; 7+ messages in thread From: Raul Rosetto Munoz @ 2013-10-03 13:32 UTC (permalink / raw) To: Bruce Ashfield; +Cc: yocto@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 1754 bytes --] I think that I found my problem, I tryed to use the kernel 3.8 before in this build system, but I decided to go back to the 2.6.35.3. But now I did bitbake -c cleanall virtual/kernel, I tryed to delete every thing about kernel 3.8 but the modules that are instaled in my /lib/modules/ still be the modules of kernel 3.8. How I clean the modules and force to use no 2.6.35.3 again. Which package or command do that? Thanks for all Help. On Thu, Oct 3, 2013 at 9:38 AM, Bruce Ashfield <bruce.ashfield@windriver.com > wrote: > On 13-10-03 08:34 AM, Raul Rosetto Munoz wrote: > >> Hello All, >> >> I'm Trying to install the kernel modules inside my rootfs but I couldn't >> find an especific information that help me to do that! >> >> I have in my /tmp/images/ the tgz with all the modules that I need. >> >> modules--2.6.35.3-r32.23-**imx28evk-20131002210958.tgz >> >> I just want that this tzg was extracted inside my rootfs /lib/modules. >> >> Please some one can help me with this? >> > > Does your image type have a RDEPENDS on "kernel-modules", or do you > have IMAGE_INSTALL_append = " kernel-modules", in your local.conf ? > > If you do either of the above, the entire set of built modules will > be installed. > > You can also install / require individual modules via > kernel-module-<module name>. > > The Yocto docs should have details on this as well. > > Cheers, > > Bruce > > >> Thanks so much. >> >> -- >> *Raul Rosetto Muñoz* >> >> >> ______________________________**_________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> >> >> > -- *Raul Rosetto Muñoz* [-- Attachment #2: Type: text/html, Size: 2759 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Install Kernel Modules in rootfs 2013-10-03 13:32 ` Raul Rosetto Munoz @ 2013-10-03 13:58 ` Bruce Ashfield 2013-10-03 14:09 ` Raul Rosetto Munoz 0 siblings, 1 reply; 7+ messages in thread From: Bruce Ashfield @ 2013-10-03 13:58 UTC (permalink / raw) To: Raul Rosetto Munoz; +Cc: yocto@yoctoproject.org On 13-10-03 09:32 AM, Raul Rosetto Munoz wrote: > I think that I found my problem, > > I tryed to use the kernel 3.8 before in this build system, but I decided > to go back to the 2.6.35.3. > > But now I did bitbake -c cleanall virtual/kernel, I tryed to delete > every thing about kernel 3.8 but the modules that are instaled in my > /lib/modules/ still be the modules of kernel 3.8. > > How I clean the modules and force to use no 2.6.35.3 again. > > Which package or command do that? If you reconstruct your image, the old module package shouldn't be re-used, since you would now have a dependency on the 2.6.35.x kernel. How exactly are they installed in /lib/modules ? Did you do anything in particular ? Bruce > > Thanks for all Help. > > > On Thu, Oct 3, 2013 at 9:38 AM, Bruce Ashfield > <bruce.ashfield@windriver.com <mailto:bruce.ashfield@windriver.com>> wrote: > > On 13-10-03 08 <tel:13-10-03%2008>:34 AM, Raul Rosetto Munoz wrote: > > Hello All, > > I'm Trying to install the kernel modules inside my rootfs but I > couldn't > find an especific information that help me to do that! > > I have in my /tmp/images/ the tgz with all the modules that I need. > > modules--2.6.35.3-r32.23-__imx28evk-20131002210958.tgz > > I just want that this tzg was extracted inside my rootfs > /lib/modules. > > Please some one can help me with this? > > > Does your image type have a RDEPENDS on "kernel-modules", or do you > have IMAGE_INSTALL_append = " kernel-modules", in your local.conf ? > > If you do either of the above, the entire set of built modules will > be installed. > > You can also install / require individual modules via > kernel-module-<module name>. > > The Yocto docs should have details on this as well. > > Cheers, > > Bruce > > > Thanks so much. > > -- > *Raul Rosetto Muñoz* > > > _________________________________________________ > yocto mailing list > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> > https://lists.yoctoproject.__org/listinfo/yocto > <https://lists.yoctoproject.org/listinfo/yocto> > > > > > > -- > *Raul Rosetto Muñoz* ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Install Kernel Modules in rootfs 2013-10-03 13:58 ` Bruce Ashfield @ 2013-10-03 14:09 ` Raul Rosetto Munoz 2013-10-03 14:22 ` Bruce Ashfield 0 siblings, 1 reply; 7+ messages in thread From: Raul Rosetto Munoz @ 2013-10-03 14:09 UTC (permalink / raw) To: Bruce Ashfield; +Cc: yocto@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 4143 bytes --] Look all the time the modules of kernel 3.8 come. My /lib/modules is like this: /lib/modules$ ll total 16 drwxr-xr-x 4 raul raul 4096 Oct 3 10:09 ./ drwxr-xr-x 7 raul raul 4096 Oct 3 10:09 ../ drwxr-xr-x 2 raul raul 4096 Oct 3 10:09 2.6.35.3-1.1.0+yocto+g914558e/ drwxr-xr-x 3 raul raul 4096 Oct 1 15:45 3.8.13-fslc+g7205340/ /lib/modules$ ll 2.6.35.3-1.1.0+yocto+g914558e/ total 36 drwxr-xr-x 2 raul raul 4096 Oct 3 10:09 ./ drwxr-xr-x 4 raul raul 4096 Oct 3 10:09 ../ -rw-r--r-- 1 raul raul 45 Oct 3 10:09 modules.alias -rw-r--r-- 1 raul raul 12 Oct 3 10:09 modules.alias.bin -rw-r--r-- 1 raul raul 0 Oct 3 10:09 modules.builtin.bin -rw-r--r-- 1 raul raul 0 Oct 3 10:09 modules.dep -rw-r--r-- 1 raul raul 12 Oct 3 10:09 modules.dep.bin -rw-r--r-- 1 raul raul 52 Oct 3 10:09 modules.devname -rw-r--r-- 1 raul raul 131 Oct 3 10:09 modules.softdep -rw-r--r-- 1 raul raul 49 Oct 3 10:09 modules.symbols -rw-r--r-- 1 raul raul 12 Oct 3 10:09 modules.symbols.bin /lib/modules$ ll 3.8.13-fslc+g7205340/ total 24 drwxr-xr-x 3 raul raul 4096 Oct 1 15:45 ./ drwxr-xr-x 4 raul raul 4096 Oct 3 10:09 ../ drwxr-xr-x 6 raul raul 4096 Oct 1 15:45 kernel/ -rw-r--r-- 1 raul raul 5153 Oct 1 15:45 modules.builtin -rw-r--r-- 1 raul raul 391 Oct 1 15:45 modules.order I have no idea how to remove the remains of the kernel 3.8. I dont want to delete all the /tmp =/ Take so much time. On Thu, Oct 3, 2013 at 10:58 AM, Bruce Ashfield < bruce.ashfield@windriver.com> wrote: > On 13-10-03 09:32 AM, Raul Rosetto Munoz wrote: > >> I think that I found my problem, >> >> I tryed to use the kernel 3.8 before in this build system, but I decided >> to go back to the 2.6.35.3. >> >> But now I did bitbake -c cleanall virtual/kernel, I tryed to delete >> every thing about kernel 3.8 but the modules that are instaled in my >> /lib/modules/ still be the modules of kernel 3.8. >> >> How I clean the modules and force to use no 2.6.35.3 again. >> >> Which package or command do that? >> > > If you reconstruct your image, the old module package shouldn't be > re-used, since you would now have a dependency on the 2.6.35.x kernel. > > How exactly are they installed in /lib/modules ? Did you do anything > in particular ? > > Bruce > > >> Thanks for all Help. >> >> >> On Thu, Oct 3, 2013 at 9:38 AM, Bruce Ashfield >> <bruce.ashfield@windriver.com <mailto:bruce.ashfield@**windriver.com<bruce.ashfield@windriver.com>>> >> wrote: >> >> >> On 13-10-03 08 <tel:13-10-03%2008>:34 AM, Raul Rosetto Munoz wrote: >> >> Hello All, >> >> I'm Trying to install the kernel modules inside my rootfs but I >> couldn't >> find an especific information that help me to do that! >> >> I have in my /tmp/images/ the tgz with all the modules that I >> need. >> >> modules--2.6.35.3-r32.23-__**imx28evk-20131002210958.tgz >> >> >> I just want that this tzg was extracted inside my rootfs >> /lib/modules. >> >> Please some one can help me with this? >> >> >> Does your image type have a RDEPENDS on "kernel-modules", or do you >> have IMAGE_INSTALL_append = " kernel-modules", in your local.conf ? >> >> If you do either of the above, the entire set of built modules will >> be installed. >> >> You can also install / require individual modules via >> kernel-module-<module name>. >> >> The Yocto docs should have details on this as well. >> >> Cheers, >> >> Bruce >> >> >> Thanks so much. >> >> -- >> *Raul Rosetto Muñoz* >> >> >> ______________________________**___________________ >> yocto mailing list >> yocto@yoctoproject.org <mailto:yocto@yoctoproject.org**> >> https://lists.yoctoproject.__**org/listinfo/yocto >> >> <https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> >> > >> >> >> >> >> >> -- >> *Raul Rosetto Muñoz* >> > > -- *Raul Rosetto Muñoz* [-- Attachment #2: Type: text/html, Size: 7317 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Install Kernel Modules in rootfs 2013-10-03 14:09 ` Raul Rosetto Munoz @ 2013-10-03 14:22 ` Bruce Ashfield 2013-10-03 15:37 ` Raul Rosetto Munoz 0 siblings, 1 reply; 7+ messages in thread From: Bruce Ashfield @ 2013-10-03 14:22 UTC (permalink / raw) To: Raul Rosetto Munoz; +Cc: yocto@yoctoproject.org On 13-10-03 10:09 AM, Raul Rosetto Munoz wrote: > Look all the time the modules of kernel 3.8 come. > > My /lib/modules is like this: That's where ? In your booted target ? What BSP are you using, how did you install the image ? Answering that question, will likely get you your answer. If you previously generated a rootfs and installed it. You'd need to do the same thing and do it with a clean install with the new kernel to remove all remnants of the old package. (That's assuming you aren't using package management on the target, or package feeds. I don't, so manually look after this sort of thing). Cheers, Bruce > > /lib/modules$ ll > total 16 > drwxr-xr-x 4 raul raul 4096 Oct 3 10:09 ./ > drwxr-xr-x 7 raul raul 4096 Oct 3 10:09 ../ > drwxr-xr-x 2 raul raul 4096 Oct 3 10:09 2.6.35.3-1.1.0+yocto+g914558e/ > drwxr-xr-x 3 raul raul 4096 Oct 1 15:45 3.8.13-fslc+g7205340/ > > > /lib/modules$ ll 2.6.35.3-1.1.0+yocto+g914558e/ > total 36 > drwxr-xr-x 2 raul raul 4096 Oct 3 10:09 ./ > drwxr-xr-x 4 raul raul 4096 Oct 3 10:09 ../ > -rw-r--r-- 1 raul raul 45 Oct 3 10:09 modules.alias > -rw-r--r-- 1 raul raul 12 Oct 3 10:09 modules.alias.bin > -rw-r--r-- 1 raul raul 0 Oct 3 10:09 modules.builtin.bin > -rw-r--r-- 1 raul raul 0 Oct 3 10:09 modules.dep > -rw-r--r-- 1 raul raul 12 Oct 3 10:09 modules.dep.bin > -rw-r--r-- 1 raul raul 52 Oct 3 10:09 modules.devname > -rw-r--r-- 1 raul raul 131 Oct 3 10:09 modules.softdep > -rw-r--r-- 1 raul raul 49 Oct 3 10:09 modules.symbols > -rw-r--r-- 1 raul raul 12 Oct 3 10:09 modules.symbols.bin > > /lib/modules$ ll 3.8.13-fslc+g7205340/ > total 24 > drwxr-xr-x 3 raul raul 4096 Oct 1 15:45 ./ > drwxr-xr-x 4 raul raul 4096 Oct 3 10:09 ../ > drwxr-xr-x 6 raul raul 4096 Oct 1 15:45 kernel/ > -rw-r--r-- 1 raul raul 5153 Oct 1 15:45 modules.builtin > -rw-r--r-- 1 raul raul 391 Oct 1 15:45 modules.order > > I have no idea how to remove the remains of the kernel 3.8. > > I dont want to delete all the /tmp > > =/ > > Take so much time. > > > > > > > > > On Thu, Oct 3, 2013 at 10:58 AM, Bruce Ashfield > <bruce.ashfield@windriver.com <mailto:bruce.ashfield@windriver.com>> wrote: > > On 13-10-03 09 <tel:13-10-03%2009>:32 AM, Raul Rosetto Munoz wrote: > > I think that I found my problem, > > I tryed to use the kernel 3.8 before in this build system, but I > decided > to go back to the 2.6.35.3. > > But now I did bitbake -c cleanall virtual/kernel, I tryed to delete > every thing about kernel 3.8 but the modules that are instaled in my > /lib/modules/ still be the modules of kernel 3.8. > > How I clean the modules and force to use no 2.6.35.3 again. > > Which package or command do that? > > > If you reconstruct your image, the old module package shouldn't be > re-used, since you would now have a dependency on the 2.6.35.x kernel. > > How exactly are they installed in /lib/modules ? Did you do anything > in particular ? > > Bruce > > > Thanks for all Help. > > > On Thu, Oct 3, 2013 at 9:38 AM, Bruce Ashfield > <bruce.ashfield@windriver.com > <mailto:bruce.ashfield@windriver.com> > <mailto:bruce.ashfield@__windriver.com > <mailto:bruce.ashfield@windriver.com>>> wrote: > > > On 13-10-03 08 <tel:13-10-03%2008> <tel:13-10-03%2008>:34 > AM, Raul Rosetto Munoz wrote: > > Hello All, > > I'm Trying to install the kernel modules inside my > rootfs but I > couldn't > find an especific information that help me to do that! > > I have in my /tmp/images/ the tgz with all the modules > that I need. > > modules--2.6.35.3-r32.23-____imx28evk-20131002210958.tgz > > > I just want that this tzg was extracted inside my rootfs > /lib/modules. > > Please some one can help me with this? > > > Does your image type have a RDEPENDS on "kernel-modules", > or do you > have IMAGE_INSTALL_append = " kernel-modules", in your > local.conf ? > > If you do either of the above, the entire set of built > modules will > be installed. > > You can also install / require individual modules via > kernel-module-<module name>. > > The Yocto docs should have details on this as well. > > Cheers, > > Bruce > > > Thanks so much. > > -- > *Raul Rosetto Muñoz* > > > ___________________________________________________ > yocto mailing list > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> > <mailto:yocto@yoctoproject.org <mailto:yocto@yoctoproject.org>__> > https://lists.yoctoproject.____org/listinfo/yocto > > <https://lists.yoctoproject.__org/listinfo/yocto > <https://lists.yoctoproject.org/listinfo/yocto>> > > > > > > -- > *Raul Rosetto Muñoz* > > > > > > -- > *Raul Rosetto Muñoz* ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Install Kernel Modules in rootfs 2013-10-03 14:22 ` Bruce Ashfield @ 2013-10-03 15:37 ` Raul Rosetto Munoz 0 siblings, 0 replies; 7+ messages in thread From: Raul Rosetto Munoz @ 2013-10-03 15:37 UTC (permalink / raw) To: Bruce Ashfield; +Cc: yocto@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 7223 bytes --] Bruce, I don't know if i did the correct thing but works. I found in my tmp some thing about kernel 3.8 fslc and I deleted it. /tmp$ find . -name "*3.8*" | grep fslc ./stamps/imx28evk-poky-linux-gnueabi/linux-fslc/3.8+gitAUTOINC+72053409242244eaa59497e665945ddeea69c397-r5.do_cleansstate.sigdata.fff4fea9e1722790f7eb22d5d464b82a ./stamps/imx28evk-poky-linux-gnueabi/linux-fslc/3.8+gitAUTOINC+72053409242244eaa59497e665945ddeea69c397-r5.do_cleansstate.fff4fea9e1722790f7eb22d5d464b82a ./work/imx28evk-poky-linux-gnueabi/linux-fslc/3.8+gitAUTOINC+72053409242244eaa59497e665945ddeea69c397-r5 ./work/imx28evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/rootfs/lib/modules/3.8.13-fslc+g7205340 ./work/imx28evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/rootfs/boot/uImage-3.8.13-fslc+g7205340 ./work/imx28evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/rootfs/etc/rpm-postinsts/kernel-image-3.8.13-fslc+g7205340 ./buildstats/virtual/kernel-imx28evk/201310011528/linux-fslc-3.8+gitAUTOINC+72053409242244eaa59497e665945ddeea69c397-r5 After that I returned my prefered kernel version for 3.8, and did a bitbake cleanall virtual/kernel. And change again my kernel version for default 2.6.35 and works perfect. Thanks For all help, did you help me a lot! On Thu, Oct 3, 2013 at 11:22 AM, Bruce Ashfield < bruce.ashfield@windriver.com> wrote: > On 13-10-03 10:09 AM, Raul Rosetto Munoz wrote: > >> Look all the time the modules of kernel 3.8 come. >> >> My /lib/modules is like this: >> > > That's where ? In your booted target ? What BSP are you using, how did > you install the image ? > > Answering that question, will likely get you your answer. If you previously > generated a rootfs and installed it. You'd need to do the same thing > and do it with a clean install with the new kernel to remove all > remnants of the old package. > > (That's assuming you aren't using package management on the target, > or package feeds. I don't, so manually look after this sort of thing). > > Cheers, > > Bruce > > >> /lib/modules$ ll >> total 16 >> drwxr-xr-x 4 raul raul 4096 Oct 3 10:09 ./ >> drwxr-xr-x 7 raul raul 4096 Oct 3 10:09 ../ >> drwxr-xr-x 2 raul raul 4096 Oct 3 10:09 2.6.35.3-1.1.0+yocto+g914558e/ >> drwxr-xr-x 3 raul raul 4096 Oct 1 15:45 3.8.13-fslc+g7205340/ >> >> >> /lib/modules$ ll 2.6.35.3-1.1.0+yocto+g914558e/ >> total 36 >> drwxr-xr-x 2 raul raul 4096 Oct 3 10:09 ./ >> drwxr-xr-x 4 raul raul 4096 Oct 3 10:09 ../ >> -rw-r--r-- 1 raul raul 45 Oct 3 10:09 modules.alias >> -rw-r--r-- 1 raul raul 12 Oct 3 10:09 modules.alias.bin >> -rw-r--r-- 1 raul raul 0 Oct 3 10:09 modules.builtin.bin >> -rw-r--r-- 1 raul raul 0 Oct 3 10:09 modules.dep >> -rw-r--r-- 1 raul raul 12 Oct 3 10:09 modules.dep.bin >> -rw-r--r-- 1 raul raul 52 Oct 3 10:09 modules.devname >> -rw-r--r-- 1 raul raul 131 Oct 3 10:09 modules.softdep >> -rw-r--r-- 1 raul raul 49 Oct 3 10:09 modules.symbols >> -rw-r--r-- 1 raul raul 12 Oct 3 10:09 modules.symbols.bin >> >> /lib/modules$ ll 3.8.13-fslc+g7205340/ >> total 24 >> drwxr-xr-x 3 raul raul 4096 Oct 1 15:45 ./ >> drwxr-xr-x 4 raul raul 4096 Oct 3 10:09 ../ >> drwxr-xr-x 6 raul raul 4096 Oct 1 15:45 kernel/ >> -rw-r--r-- 1 raul raul 5153 Oct 1 15:45 modules.builtin >> -rw-r--r-- 1 raul raul 391 Oct 1 15:45 modules.order >> >> I have no idea how to remove the remains of the kernel 3.8. >> >> I dont want to delete all the /tmp >> >> =/ >> >> Take so much time. >> >> >> >> >> >> >> >> >> On Thu, Oct 3, 2013 at 10:58 AM, Bruce Ashfield >> <bruce.ashfield@windriver.com <mailto:bruce.ashfield@**windriver.com<bruce.ashfield@windriver.com>>> >> wrote: >> >> >> On 13-10-03 09 <tel:13-10-03%2009>:32 AM, Raul Rosetto Munoz wrote: >> >> I think that I found my problem, >> >> I tryed to use the kernel 3.8 before in this build system, but I >> decided >> to go back to the 2.6.35.3. >> >> But now I did bitbake -c cleanall virtual/kernel, I tryed to >> delete >> every thing about kernel 3.8 but the modules that are instaled in >> my >> /lib/modules/ still be the modules of kernel 3.8. >> >> How I clean the modules and force to use no 2.6.35.3 again. >> >> Which package or command do that? >> >> >> If you reconstruct your image, the old module package shouldn't be >> re-used, since you would now have a dependency on the 2.6.35.x kernel. >> >> How exactly are they installed in /lib/modules ? Did you do anything >> in particular ? >> >> Bruce >> >> >> Thanks for all Help. >> >> >> On Thu, Oct 3, 2013 at 9:38 AM, Bruce Ashfield >> <bruce.ashfield@windriver.com >> <mailto:bruce.ashfield@**windriver.com<bruce.ashfield@windriver.com> >> > >> <mailto:bruce.ashfield@__windr**iver.com <http://windriver.com> >> <mailto:bruce.ashfield@**windriver.com<bruce.ashfield@windriver.com>>>> >> wrote: >> >> >> On 13-10-03 08 <tel:13-10-03%2008> <tel:13-10-03%2008>:34 >> >> AM, Raul Rosetto Munoz wrote: >> >> Hello All, >> >> I'm Trying to install the kernel modules inside my >> rootfs but I >> couldn't >> find an especific information that help me to do that! >> >> I have in my /tmp/images/ the tgz with all the modules >> that I need. >> >> modules--2.6.35.3-r32.23-____** >> imx28evk-20131002210958.tgz >> >> >> >> I just want that this tzg was extracted inside my rootfs >> /lib/modules. >> >> Please some one can help me with this? >> >> >> Does your image type have a RDEPENDS on "kernel-modules", >> or do you >> have IMAGE_INSTALL_append = " kernel-modules", in your >> local.conf ? >> >> If you do either of the above, the entire set of built >> modules will >> be installed. >> >> You can also install / require individual modules via >> kernel-module-<module name>. >> >> The Yocto docs should have details on this as well. >> >> Cheers, >> >> Bruce >> >> >> Thanks so much. >> >> -- >> *Raul Rosetto Muñoz* >> >> >> ______________________________**_____________________ >> >> yocto mailing list >> yocto@yoctoproject.org <mailto:yocto@yoctoproject.org**> >> <mailto:yocto@yoctoproject.org <mailto:yocto@yoctoproject.org** >> >__> >> https://lists.yoctoproject.___**_org/listinfo/yocto >> >> >> <https://lists.yoctoproject.__**org/listinfo/yocto >> <https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> >> >> >> >> >> >> >> >> -- >> *Raul Rosetto Muñoz* >> >> >> >> >> >> -- >> *Raul Rosetto Muñoz* >> > > -- *Raul Rosetto Muñoz* [-- Attachment #2: Type: text/html, Size: 9910 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-10-03 15:37 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-10-03 12:34 Install Kernel Modules in rootfs Raul Rosetto Munoz 2013-10-03 12:38 ` Bruce Ashfield 2013-10-03 13:32 ` Raul Rosetto Munoz 2013-10-03 13:58 ` Bruce Ashfield 2013-10-03 14:09 ` Raul Rosetto Munoz 2013-10-03 14:22 ` Bruce Ashfield 2013-10-03 15:37 ` Raul Rosetto Munoz
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.