From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from correo.horus.es (correo.horus.es [2.139.157.236]) by yocto-www.yoctoproject.org (Postfix) with ESMTP id 7BFC3E0161C for ; Thu, 3 Oct 2013 10:34:36 -0700 (PDT) Received: from [172.30.250.61] (172.30.250.61) by horus27 (Axigen) with (CAMELLIA256-SHA encrypted) ESMTPSA id 2950F1; Thu, 3 Oct 2013 19:34:34 +0200 Message-ID: <524DAAA9.9060606@horus.es> Date: Thu, 03 Oct 2013 19:34:33 +0200 From: =?ISO-8859-1?Q?Jose_M=AA_Ferreiro?= User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:16.0) Gecko/20121005 Thunderbird/16.0 MIME-Version: 1.0 To: meta-freescale@yoctoproject.org References: <524D97E9.6080403@horus.es> <524D9B6B.6040205@freescale.com> In-Reply-To: <524D9B6B.6040205@freescale.com> X-AxigenVirus-Level: 1 X-AxigenSpam-Level: 2 Subject: Re: Streaming udp video through mfw_isink X-BeenThere: meta-freescale@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Usage and development list for the meta-fsl-* layers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 03 Oct 2013 17:34:41 -0000 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit El 03/10/2013 18:29, Daiane Angolini escribió: > On 10/03/2013 01:14 PM, diego wrote: >> Hello everybody, >> >> We're trying to show a video from an udp source. If we put the next line >> (with mfw_v4lsink) it works perfectly >> >> gst-launch -v udpsrc port=1234 ! "application/x-rtp, payload=127" ! >> rtph264depay ! ffdec_h264 ! mfw_v4lsink disp-width=320 disp-height=240 >> axis-top=100 axis-left=100 >> >> However if we try to use mfw_isink doesn't work: >> >> gst-launch -v udpsrc port=1234 ! "application/x-rtp, payload=127" ! >> rtph264depay ! ffdec_h264 ! mfw_isink disp-width=320 disp-height=240 >> axis-top=100 axis-left=100 >> >> Apparently the last line seems to work (no error) but we don't see >> nothing it our screen. We are using a sabre lite board with HDMI monitor >> ,and we made the probes with Dylan, Dora and Master with linux-imx. > > Try to change the "display" property of isink. > > I don't remember if HDMI is part of options... Please, check using > gst-inspect and find -name *vss*.conf > > > It's too much thing to hold on my mind, so I only keep the links, sorry Hi Daiane Just now we found how to make it visible. Did a: export VSALPHA=1 before launch the isink command We needed this to make work a test with four clips but we did not put it now. Just tried and worked. However any links are welcomed :) Thank you very much > >> Any ideas? >> >> Thank you! >> >> P.S: the udp source is a PC with Ubuntu and gstreamer . We just wrote >> this line >> >> gst-launch v4l2src device=/dev/video0 ! >> 'video/x-raw-yuv,width=320,height=240' ! x264enc pass=qual quantizer=20 >> tune=zerolatency ! rtph264pay ! udpsink host=172.30.250.45 port=1234. >> >> > >