From: Sourav Poddar <sourav.poddar@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [UBOOT][PATCHv3 5/7] spi: add TI QSPI driver
Date: Thu, 3 Oct 2013 23:56:13 +0530 [thread overview]
Message-ID: <524DB6C5.50600@ti.com> (raw)
In-Reply-To: <CAD6G_RREa5Re5pHb_=WmFKYs4S3o_LL7SJCgNP4=7m9+6hxapw@mail.gmail.com>
On Thursday 03 October 2013 11:19 PM, Jagan Teki wrote:
> Hi Sourav,
>
> Please try to code the driver as specified in below thread!
> http://lists.denx.de/pipermail/u-boot/2013-August/160472.html
Ok.
> On Fri, Sep 20, 2013 at 8:21 AM, Nobuhiro Iwamatsu
> <nobuhiro.iwamatsu.yj@renesas.com> wrote:
>> Hi,
>>
>> 2013/9/18 Sourav Poddar<sourav.poddar@ti.com>:
>>> From: Matt Porter<matt.porter@linaro.org>
>>>
>>> Adds a SPI master driver for the TI QSPI peripheral.
>>>
>>> Signed-off-by: Matt Porter<matt.porter@linaro.org>
>>> Signed-off-by: Sourav Poddar<sourav.poddar@ti.com>
>>> [Added quad read support and memory mapped support).
>>> ---
>>> drivers/spi/Makefile | 1 +
>>> drivers/spi/ti_qspi.c | 324 +++++++++++++++++++++++++++++++++++++++++++++++++
>>> 2 files changed, 325 insertions(+), 0 deletions(-)
>>> create mode 100644 drivers/spi/ti_qspi.c
>>>
>>> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
>>> index 91d24ce..e5941b0 100644
>>> --- a/drivers/spi/Makefile
>>> +++ b/drivers/spi/Makefile
>>> @@ -38,6 +38,7 @@ COBJS-$(CONFIG_FDT_SPI) += fdt_spi.o
>>> COBJS-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o
>>> COBJS-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o
>>> COBJS-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o
>>> +COBJS-$(CONFIG_TI_QSPI) += ti_qspi.o
>>> COBJS-$(CONFIG_XILINX_SPI) += xilinx_spi.o
>>> COBJS-$(CONFIG_ZYNQ_SPI) += zynq_spi.o
>>>
>>> diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
>>> new file mode 100644
>>> index 0000000..3e88cf4
>>> --- /dev/null
>>> +++ b/drivers/spi/ti_qspi.c
>>> @@ -0,0 +1,324 @@
>>> +/*
>>> + * TI QSPI driver
>>> + *
>>> + * Copyright (C) 2013, Texas Instruments, Incorporated
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation; either version 2 of
>>> + * the License, or (at your option) any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + */
>> Could you change to 'SPDX-License-Identifier: GPL-2.0+', please?
>>
>> Best regards,
>> Nobuhiro
>> --
>> Nobuhiro Iwamatsu
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>
>
next prev parent reply other threads:[~2013-10-03 18:26 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-18 12:21 [U-Boot] [UBOOT][PATCHv3 0/7] mtd/spi: add quad/memory mapped read support, add ti qspi controller Sourav Poddar
2013-09-18 12:21 ` [U-Boot] [UBOOT][PATCHv3 1/7] omap5: add qspi support Sourav Poddar
2013-09-18 12:21 ` [U-Boot] [UBOOT][PATCHv3 2/7] armv7: hw_data: change clock divider setting Sourav Poddar
2013-09-18 12:21 ` [U-Boot] [UBOOT][PATCHv3 3/7] drivers: mtd: :spi: Add quad read support Sourav Poddar
2013-09-18 12:21 ` [U-Boot] [UBOOT][PATCHv3 4/7] driver: mtd: spi: Add memory mapped " Sourav Poddar
2013-09-18 12:21 ` [U-Boot] [UBOOT][PATCHv3 5/7] spi: add TI QSPI driver Sourav Poddar
2013-09-20 2:51 ` Nobuhiro Iwamatsu
2013-10-03 17:49 ` Jagan Teki
2013-10-03 18:26 ` Sourav Poddar [this message]
2013-09-18 12:21 ` [U-Boot] [UBOOT][PATCHv3 6/7] dra7xx_evm: add SPL API, QSPI, and serial flash support Sourav Poddar
2013-09-18 12:21 ` [U-Boot] [UBOOT][PATCHv3 7/7] README: qspi usecase and testing documentation Sourav Poddar
2013-10-03 17:43 ` [U-Boot] [UBOOT][PATCHv3 0/7] mtd/spi: add quad/memory mapped read support, add ti qspi controller Jagan Teki
2013-10-03 18:25 ` Sourav Poddar
2013-10-03 18:26 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=524DB6C5.50600@ti.com \
--to=sourav.poddar@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.