From: "Alfredo Jesús Delaiti" <alfredodelaiti@netscape.net>
To: "Miroslav Slugeň" <thunder.mmm@gmail.com>,
linux-media@vger.kernel.org,
"Miroslav Slugeň" <thunder.m@email.cz>
Subject: Re: cx23885: Add basic analog radio support
Date: Fri, 04 Oct 2013 15:56:23 -0300 [thread overview]
Message-ID: <524F0F57.5020605@netscape.net> (raw)
In-Reply-To: <CAEN_-SBR5qGJfUk6h+n04Q4zP-zofiLO+Jr6pOBJU2nqYBuDWQ@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2361 bytes --]
Hi all
El 14/01/12 15:25, Miroslav Slugeň escribió:
> New version of patch, fixed video modes for DVR3200 tuners and working
> audio mux.
I tested this patch (https://linuxtv.org/patch/9498/) with the latest
versions of git (September 28, 2013) with my TV card (Mygica X8507) and
it works.
I found some issue, although it may be through a bad implementation of mine.
Details of them:
1) Some warning when compiling
...
CC [M]
/home/alfredo/ISDB/Nuevo_Driver/git/media_build/v4l/cx23885-video.o
/home/alfredo/ISDB/Nuevo_Driver/git/media_build/v4l/cx23885-video.c:1910:8:
: initialization from incompatible pointer type [enabled by default]
/home/alfredo/ISDB/Nuevo_Driver/git/media_build/v4l/cx23885-video.c:1910:8:
warning: (near initialization for 'radio_ioctl_ops.vidioc_s_tuner')
[enabled by default]
/home/alfredo/ISDB/Nuevo_Driver/git/media_build/v4l/cx23885-video.c:1911:8:
warning: initialization from incompatible pointer type [enabled by default]
/home/alfredo/ISDB/Nuevo_Driver/git/media_build/v4l/cx23885-video.c:1911:8:
warning: (near initialization for 'radio_ioctl_ops.vidioc_s_audio')
[enabled by default]
CC [M] /home/alfredo/ISDB/Nuevo_Driver/git/media_build/v4l/cx23885-vbi.o
...
--------------------------------------------------------
static const struct v4l2_ioctl_ops radio_ioctl_ops = {
.vidioc_s_tuner = radio_s_tuner, /* line 1910 */
.vidioc_s_audio = radio_s_audio, /* line 1911 */
--------------------------------------------------------
2)
No reports signal strength or stereo signal with KRadio. XC5000 neither
reported (modprobe xc5000 debug=1). Maybe a feature XC5000.
To listen in stereo, sometimes, you have to turn on the Digital TV then
Analog TV and then radio.
3)
To listen Analog TV I need changed to NTSC standard and then PAL-Nc (the
norm in my country is PAL-Nc). If I leave the tune in NTSC no problem
with sound.
The patch (https://linuxtv.org/patch/9505/) corrects the latter, if used
tvtime with xawtv not always.
If I see-Digital TV (ISDB-T), then so as to listen the radio I have
first put the TV-Analog, because I hear very low and a strong white noise.
The latter is likely to be corrected by resetting the tuner, I have to
study it more.
I put below attached the patch applied to the plate: X8507.
Have you done any update of this patch?
Thanks
[-- Attachment #2: X8507-radio.patch --]
[-- Type: text/x-patch, Size: 2290 bytes --]
.../media/pci/cx23885/{ => }/media/pci/cx23885/cx23885-cards.c | 6 ++++++
drivers/media/pci/cx23885/{ => }/media/pci/cx23885/cx23885-dvb.c | 1 +
2 files changed, 7 insertions(+)
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index 6a71a96..324809a 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -526,16 +526,18 @@ struct cx23885_board cx23885_boards[] = {
.amux = CX25840_AUDIO7,
.gpio0 = 0,
} },
},
[CX23885_BOARD_MYGICA_X8507] = {
.name = "Mygica X8502/X8507 ISDB-T",
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
+ .radio_type = TUNER_XC5000,
+ .radio_addr = 0x61,
.tuner_bus = 1,
.porta = CX23885_ANALOG_VIDEO,
.portb = CX23885_MPEG_DVB,
.input = {
{
.type = CX23885_VMUX_TELEVISION,
.vmux = CX25840_COMPOSITE2,
.amux = CX25840_AUDIO8,
@@ -555,16 +557,20 @@ struct cx23885_board cx23885_boards[] = {
.type = CX23885_VMUX_COMPONENT,
.vmux = CX25840_COMPONENT_ON |
CX25840_VIN1_CH1 |
CX25840_VIN6_CH2 |
CX25840_VIN7_CH3,
.amux = CX25840_AUDIO7,
},
},
+ .radio = {
+ .type= CX23885_RADIO,
+ .amux= CX25840_AUDIO8,
+ },
},
[CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL] = {
.name = "TerraTec Cinergy T PCIe Dual",
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_TEVII_S471] = {
.name = "TeVii S471",
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
index 971e4ff..4e946b2 100644
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -495,16 +495,17 @@ static struct xc5000_config mygica_x8506_xc5000_config = {
static struct mb86a20s_config mygica_x8507_mb86a20s_config = {
.demod_address = 0x10,
};
static struct xc5000_config mygica_x8507_xc5000_config = {
.i2c_address = 0x61,
.if_khz = 4000,
+ .radio_input = XC5000_RADIO_FM1,
};
static struct stv090x_config prof_8000_stv090x_config = {
.device = STV0903,
.demod_mode = STV090x_SINGLE,
.clk_mode = STV090x_CLK_EXT,
.xtal = 27000000,
.address = 0x6A,
next prev parent reply other threads:[~2013-10-04 19:07 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-14 18:25 cx23885: Add basic analog radio support Miroslav Slugeň
2012-02-28 17:16 ` Mauro Carvalho Chehab
2013-10-04 18:56 ` Alfredo Jesús Delaiti [this message]
2013-10-19 15:58 ` Miroslav Slugeň
2013-10-22 3:07 ` Alfredo Jesús Delaiti
2013-10-31 10:12 ` Mauro Carvalho Chehab
2013-11-04 17:18 ` Alfredo Jesús Delaiti
2013-11-13 14:52 ` [PATCH 1/2] cx23885 Radio Support [was: cx23885: Add basic analog radio support] Alfredo Jesús Delaiti
2013-12-20 9:54 ` Hans Verkuil
2013-12-22 2:36 ` Alfredo Jesús Delaiti
2013-11-13 15:04 ` [PATCH 2/2] X8502/8507 " Alfredo Jesús Delaiti
-- strict thread matches above, loose matches on Subject: below --
2011-12-17 0:35 cx23885: Add basic analog radio support Miroslav Slugeň
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=524F0F57.5020605@netscape.net \
--to=alfredodelaiti@netscape.net \
--cc=linux-media@vger.kernel.org \
--cc=thunder.m@email.cz \
--cc=thunder.mmm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.