All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Lars-Peter Clausen <lars@metafoo.de>,
	Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH 3/3] ASoC: twl6040: Use virtual DAPM mixer controls
Date: Mon, 7 Oct 2013 12:11:31 +0300	[thread overview]
Message-ID: <52527AC3.2020103@ti.com> (raw)
In-Reply-To: <525279DA.4070502@ti.com>

On 10/07/2013 12:07 PM, Peter Ujfalusi wrote:
> On 10/06/2013 02:43 PM, Lars-Peter Clausen wrote:
>> By using the new virtual DAPM mixer controls it is possible to remove the
>> twl6040 specific implementation of virtual controls.
> 
> Acked-by: Peter Ujfalusi <peter.ujflausi@ti.com>

Same typo as with the twl4030 patch:
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

> 
>>
>> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
>> ---
>>  sound/soc/codecs/twl6040.c | 22 +++++-----------------
>>  1 file changed, 5 insertions(+), 17 deletions(-)
>>
>> diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
>> index 35059a2..f2f4bcb 100644
>> --- a/sound/soc/codecs/twl6040.c
>> +++ b/sound/soc/codecs/twl6040.c
>> @@ -54,12 +54,7 @@ enum twl6040_dai_id {
>>  #define TWL6040_OUTHF_0dB 0x03
>>  #define TWL6040_OUTHF_M52dB 0x1D
>>  
>> -/* Shadow register used by the driver */
>> -#define TWL6040_REG_SW_SHADOW	0x2F
>> -#define TWL6040_CACHEREGNUM	(TWL6040_REG_SW_SHADOW + 1)
>> -
>> -/* TWL6040_REG_SW_SHADOW (0x2F) fields */
>> -#define TWL6040_EAR_PATH_ENABLE	0x01
>> +#define TWL6040_CACHEREGNUM	(TWL6040_REG_STATUS + 1)
>>  
>>  struct twl6040_jack_data {
>>  	struct snd_soc_jack *jack;
>> @@ -135,8 +130,6 @@ static const u8 twl6040_reg[TWL6040_CACHEREGNUM] = {
>>  	0x00, /* REG_HFOTRIM	0x2C	*/
>>  	0x09, /* REG_ACCCTL	0x2D	*/
>>  	0x00, /* REG_STATUS	0x2E (ro) */
>> -
>> -	0x00, /* REG_SW_SHADOW	0x2F - Shadow, non HW register */
>>  };
>>  
>>  /* List of registers to be restored after power up */
>> @@ -220,12 +213,8 @@ static int twl6040_read_reg_volatile(struct snd_soc_codec *codec,
>>  	if (reg >= TWL6040_CACHEREGNUM)
>>  		return -EIO;
>>  
>> -	if (likely(reg < TWL6040_REG_SW_SHADOW)) {
>> -		value = twl6040_reg_read(twl6040, reg);
>> -		twl6040_write_reg_cache(codec, reg, value);
>> -	} else {
>> -		value = twl6040_read_reg_cache(codec, reg);
>> -	}
>> +	value = twl6040_reg_read(twl6040, reg);
>> +	twl6040_write_reg_cache(codec, reg, value);
>>  
>>  	return value;
>>  }
>> @@ -261,8 +250,7 @@ static int twl6040_write(struct snd_soc_codec *codec,
>>  		return -EIO;
>>  
>>  	twl6040_write_reg_cache(codec, reg, value);
>> -	if (likely(reg < TWL6040_REG_SW_SHADOW) &&
>> -	    twl6040_is_path_unmuted(codec, reg))
>> +	if (twl6040_is_path_unmuted(codec, reg))
>>  		return twl6040_reg_write(twl6040, reg, value);
>>  	else
>>  		return 0;
>> @@ -555,7 +543,7 @@ static const struct snd_kcontrol_new hfr_mux_controls =
>>  	SOC_DAPM_ENUM("Route", twl6040_hf_enum[1]);
>>  
>>  static const struct snd_kcontrol_new ep_path_enable_control =
>> -	SOC_DAPM_SINGLE("Switch", TWL6040_REG_SW_SHADOW, 0, 1, 0);
>> +	SOC_DAPM_SINGLE_VIRT("Switch", 1);
>>  
>>  static const struct snd_kcontrol_new auxl_switch_control =
>>  	SOC_DAPM_SINGLE("Switch", TWL6040_REG_HFLCTL, 6, 1, 0);
>>
> 
> 


-- 
Péter

  reply	other threads:[~2013-10-07  9:11 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-06 11:43 [PATCH 1/3] ASoC: dapm: Add support for virtual mixer controls Lars-Peter Clausen
2013-10-06 11:43 ` [PATCH 2/3] ASoC: twl4030: Use virtual DAPM " Lars-Peter Clausen
2013-10-07  9:07   ` Peter Ujfalusi
2013-10-07  9:09     ` Peter Ujfalusi
2013-10-07 10:50   ` Mark Brown
2013-10-06 11:43 ` [PATCH 3/3] ASoC: twl6040: " Lars-Peter Clausen
2013-10-07  9:07   ` Peter Ujfalusi
2013-10-07  9:11     ` Peter Ujfalusi [this message]
2013-10-07 10:49   ` Mark Brown
2013-10-07  9:10 ` [PATCH 1/3] ASoC: dapm: Add support for virtual " Peter Ujfalusi
2013-10-07 10:45 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52527AC3.2020103@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lars@metafoo.de \
    --cc=lgirdwood@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.