[PATCH v2] ARM: tlb: ASID macro should give 32bit result for BE correct operation

[ben.dooks@codethink.co.uk (Ben Dooks)]

On 08/10/13 00:49, Santosh Shilimkar wrote:
> Victor,
>
> On Monday 07 October 2013 12:37 PM, Victor Kamensky wrote:
>> On 7 October 2013 08:57, Ben Dooks<ben.dooks@codethink.co.uk>  wrote:
>>> On 07/10/13 17:48, Victor Kamensky wrote:
>>>>
>>>> Hi Will, Ben, Russell, Thomas,
>>>>
>>>> Please review second version of patch that fixes TLB asid issue in big
>>>> endian
>>>> V7 image.
>>>>
>>>> Changes from v1:
>>>>      Note previous patch subject line was 'ARM: tlb:
>>>>      __flush_tlb_mm need to use int asid var for BE correct operation'
>>>>
>>>>      Added 'unsigned int' cast into ASID macro itself rather
>>>>      then use intermediate 'int' variable in __flush_tlb_mm function.
>>>>      This is done per v1 patch discussion at
>>>>
>>>>
>>>> http://lists.infradead.org/pipermail/linux-arm-kernel/2013-October/202583.html
>>>>
>>>> Tested with Linaro BE topic branch on Arndale board. Both LE and BE
>>>> images were tested.
>>>
>>>
>>> If you are booting on the Arndale board, is there a patch to mark
>>> the relevant Exynos devices as BE capable?
>>
>> Arndale need massive fixes in their BSP layer to be endian agnostic
>> ARM V7 platform. Unfortunate it is not as simple as with few others
>> that already marked as BE capable.
>>
>> Please see
>> https://git.linaro.org/gitweb?p=people/victor.kamensky/linux-linaro-tracking-be.git;a=shortlog;h=refs/heads/llct-be-topic
>> Mostly it is __raw_xxx conversion to xxx_relaxed, but there are
>> more subtle changes (some of them similar to changs that you've
>> done for other platforms). Also there are known unfixed issues like
>> disabling CONFIG_MMC_DW_IDMAC config because idmac
>> DMA related code is not endian agnostic yet (btw interesting class
>> of BE related problem that was not seen before).
>>
>> In Linaro we use Arndale and Pandaboard as reference platforms
>> therefore we have BE BSP fixes in our tree. But I am not sure
>> what is fate of those in long term. Also we consider these as
>> example of BSP changes that other BSP need to do.
>>
>> If Exynos and OMAP owners will have any interest for BE images,
>> and would like to see these changes in main line, we gladly
>> will work on this. Otherwise changes like this can mess up with
>> BSP ongoing drivers development.
>>
> BE support in mainline is definitely we are interested for OMAP
> and rest of the TI SoCs.

It would be great to get some more SoCs supported.

>> I think above position is consistent with similar discussion on
>> some of BE related threads - changing BSP to support BE mode
>> is BSP owners call.
>>
> Am just wondering a better method than the patch [1] which touches
> many drivers for readl/writel() replacement. Drivers are using
> that as standard based on device driver guide and was thinking
> we should not change that rule to support BE. We definitely need
> to get the byte swap achieved but probably through some other
> means.

read{b,w,l} and write{b,w,l} work fine.  It is the use of the
__raw_ versions that is the problem. I will be publishing a
paper on this for ARM TechCon.

I have not yet suggested we also change the __raw functions as
we are not yet sure if there are places where we could end up
with mixed-endian systems.

-- 
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius