From: Felix Fietkau <nbd@openwrt.org>
To: Stephen Hemminger <stephen@networkplumber.org>
Cc: netdev@vger.kernel.org
Subject: Re: [PATCH net] bridge: allow receiption on disabled port
Date: Fri, 11 Oct 2013 00:08:25 +0200 [thread overview]
Message-ID: <52572559.5020009@openwrt.org> (raw)
In-Reply-To: <20131010145255.16cf7c09@nehalam.linuxnetplumber.net>
On 2013-10-10 11:52 PM, Stephen Hemminger wrote:
> On Thu, 10 Oct 2013 22:56:33 +0200
> Felix Fietkau <nbd@openwrt.org> wrote:
>
>> On 2013-10-10 10:36 PM, Stephen Hemminger wrote:
>> > On Thu, 10 Oct 2013 14:52:50 +0200
>> > Felix Fietkau <nbd@openwrt.org> wrote:
>> >
>> >> When an ethernet device is enslaved to a bridge, and the bridge STP
>> >> detects loss of carrier (or operational state down), then normally
>> >> packet receiption is blocked.
>> >>
>> >> This breaks control applications like WPA which maybe expecting to
>> >> receive packets to negotiate to bring link up. The bridge needs to
>> >> block forwarding packets from these disabled ports, but there is no
>> >> hard requirement to not allow local packet delivery.
>> >>
>> >> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
>> >> Signed-off-by: Felix Fietkau <nbd@openwrt.org>
>> >
>> > No. This will cause duplicate packets to be delivered.
>> How? I haven't observed any duplications in my tests with this patch.
>
> The purpose of DISABLED state is to break loops in the bridge tree.
> If packet is flooded by another bridge (Broadcast Unknown or Multicast)
> then it will go down both paths.
Ah, right.
>> > If doing a link layer protocol like WPA then it should be done directly
>> > on the underlying device, not the bridge itself.
>> When the ETH_P_PAE protocol is set for the packet socket inside
>> wpa_supplicant, the bridge steals all packets before the protocol
>> handler gets them.
>> In __netif_receive_skb_core, only ptype_all gets processed before the rx
>> handler, not ptype_base.
>
> Thought it was using direct type all. Or at least the link local multicast
> address.
>
> Can you revise it to only accept packets directed to link local multicast
> address or local address, and go through the local_finish handler.
The destination address in WPA EAPOL packets from the AP is set to the
MAC address of the client, which may not be the same as the one from the
bridge.
- Felix
next prev parent reply other threads:[~2013-10-10 22:08 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-10 12:52 [PATCH net] bridge: allow receiption on disabled port Felix Fietkau
2013-10-10 20:36 ` Stephen Hemminger
2013-10-10 20:56 ` Felix Fietkau
2013-10-10 21:52 ` Stephen Hemminger
2013-10-10 22:08 ` Felix Fietkau [this message]
2013-10-11 2:35 ` Stephen Hemminger
2013-10-11 10:18 ` Felix Fietkau
2013-10-11 15:10 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52572559.5020009@openwrt.org \
--to=nbd@openwrt.org \
--cc=netdev@vger.kernel.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.