From: Andre Tomt <andre@tomt.net>
To: netdev@vger.kernel.org
Subject: Re: 3.12-git Intel e1000e hardware unit hang / tx queue timeouts
Date: Sat, 12 Oct 2013 17:30:06 +0200 [thread overview]
Message-ID: <52596AFE.8050800@tomt.net> (raw)
In-Reply-To: <52594DBD.3070108@tomt.net>
On 12. okt. 2013 15:25, Andre Tomt wrote:
> I'm going to boot 3.10.16 on it now, and see how it fares.
3.10.16 is just as flaky.
Turning the offloads back off for now, will try to dig a little deeper
later.
3.10 log:
> [ 2990.799280] e1000e 0000:00:19.0 em2: Detected Hardware Unit Hang:
> [ 2990.799280] TDH <f8>
> [ 2990.799280] TDT <1a>
> [ 2990.799280] next_to_use <1a>
> [ 2990.799280] next_to_clean <f6>
> [ 2990.799280] buffer_info[next_to_clean]:
> [ 2990.799280] time_stamp <1000a3f4a>
> [ 2990.799280] next_to_watch <f8>
> [ 2990.799280] jiffies <1000a41cd>
> [ 2990.799280] next_to_watch.status <0>
> [ 2990.799280] MAC Status <80083>
> [ 2990.799280] PHY Status <796d>
> [ 2990.799280] PHY 1000BASE-T Status <7800>
> [ 2990.799280] PHY Extended Status <3000>
> [ 2990.799280] PCI Status <10>
> [ 2992.800488] e1000e 0000:00:19.0 em2: Detected Hardware Unit Hang:
> [ 2992.800488] TDH <f8>
> [ 2992.800488] TDT <1a>
> [ 2992.800488] next_to_use <1a>
> [ 2992.800488] next_to_clean <f6>
> [ 2992.800488] buffer_info[next_to_clean]:
> [ 2992.800488] time_stamp <1000a3f4a>
> [ 2992.800488] next_to_watch <f8>
> [ 2992.800488] jiffies <1000a43c1>
> [ 2992.800488] next_to_watch.status <0>
> [ 2992.800488] MAC Status <80083>
> [ 2992.800488] PHY Status <796d>
> [ 2992.800488] PHY 1000BASE-T Status <7800>
> [ 2992.800488] PHY Extended Status <3000>
> [ 2992.800488] PCI Status <10>
> [ 2994.801816] e1000e 0000:00:19.0 em2: Detected Hardware Unit Hang:
> [ 2994.801816] TDH <f8>
> [ 2994.801816] TDT <1a>
> [ 2994.801816] next_to_use <1a>
> [ 2994.801816] next_to_clean <f6>
> [ 2994.801816] buffer_info[next_to_clean]:
> [ 2994.801816] time_stamp <1000a3f4a>
> [ 2994.801816] next_to_watch <f8>
> [ 2994.801816] jiffies <1000a45b5>
> [ 2994.801816] next_to_watch.status <0>
> [ 2994.801816] MAC Status <80083>
> [ 2994.801816] PHY Status <796d>
> [ 2994.801816] PHY 1000BASE-T Status <7800>
> [ 2994.801816] PHY Extended Status <3000>
> [ 2994.801816] PCI Status <10>
> [ 2995.805673] ------------[ cut here ]------------
> [ 2995.805684] WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x185/0x1eb()
> [ 2995.805695] NETDEV WATCHDOG: em2 (e1000e): transmit queue 0 timed out
> [ 2995.805697] Modules linked in: vhost_net macvtap macvlan tun xt_pkttype xt_CT iptable_raw ipt_MASQUERADE xt_nat iptable_nat nf_nat_ipv4 nf_nat ip6t_frag ip6t_ah ip6t_REJECT ebtable_nat ip6table_filter ebtables ip6_tables xt_LOG xt_limit ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_tcpudp xt_conntrack nf_conntrack xt_multiport iptable_filter ip_tables x_tables iTCO_wdt iTCO_vendor_support act_mirred cls_u32 sch_ingress sch_fq_codel sch_hfsc fbcon bitblit softcursor font tileblit bridge arc4 8021q garp stp mrp llc dm_multipath scsi_dh ath9k ath9k_common ath9k_hw ath coretemp mac80211 crc32_pclmul crc32c_intel ghash_clmulni_intel cryptd lpc_ich cfg80211 mfd_core rfkill firmware_class i915 intel_agp intel_gtt drm_kms_helper drm i2c_algo_bit mei_me i2c_core mei tpm_tis evdev tpm tpm_bios
ehci_pci ehci_hcd video kvm_intel kvm ifb dummy w83627ehf hwmon_vid hwmon ext4 crc16 jbd2 mbcache dm_mod sd_mod ahci e1000e libahci xhci_hcd ptp pps_core usbcore usb_common
> [ 2995.805772] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-1-server #1
> [ 2995.805774] Hardware name: /DQ77KB, BIOS KBQ7710H.86A.0052.2013.0708.1336 07/08/2013
> [ 2995.805777] 00000000000114a8 ffff88021e203da0 ffffffff813394c7 ffff88021e203dd8
> [ 2995.805780] ffffffff8102d71c ffff88021e203de8 ffff88020fd0c000 ffff880212b8cc00
> [ 2995.805783] 0000000000000001 0000000000000000 ffff88021e203e38 ffffffff8102d77b
> [ 2995.805787] Call Trace:
> [ 2995.805788] <IRQ> [<ffffffff813394c7>] dump_stack+0x19/0x1b
> [ 2995.805799] [<ffffffff8102d71c>] warn_slowpath_common+0x60/0x78
> [ 2995.805802] [<ffffffff8102d77b>] warn_slowpath_fmt+0x47/0x49
> [ 2995.805808] [<ffffffff812956c6>] dev_watchdog+0x185/0x1eb
> [ 2995.805812] [<ffffffff81295541>] ? dev_graft_qdisc+0x66/0x66
> [ 2995.805815] [<ffffffff81295541>] ? dev_graft_qdisc+0x66/0x66
> [ 2995.805820] [<ffffffff810384c3>] call_timer_fn.isra.26+0x23/0x7b
> [ 2995.805823] [<ffffffff810386c6>] run_timer_softirq+0x1ab/0x1d3
> [ 2995.805826] [<ffffffff8103362e>] __do_softirq+0xbf/0x173
> [ 2995.805831] [<ffffffff8133f07c>] call_softirq+0x1c/0x30
> [ 2995.805836] [<ffffffff810035b7>] do_softirq+0x2e/0x69
> [ 2995.805838] [<ffffffff810337ac>] irq_exit+0x3e/0x4c
> [ 2995.805842] [<ffffffff8101d092>] smp_apic_timer_interrupt+0x86/0x94
> [ 2995.805846] [<ffffffff8133ea0a>] apic_timer_interrupt+0x6a/0x70
> [ 2995.805847] <EOI> [<ffffffff81253412>] ? cpuidle_enter_state+0x4d/0x9e
> [ 2995.805853] [<ffffffff8125340b>] ? cpuidle_enter_state+0x46/0x9e
> [ 2995.805856] [<ffffffff81253535>] cpuidle_idle_call+0xd2/0x121
> [ 2995.805860] [<ffffffff81008dfd>] arch_cpu_idle+0x9/0x18
> [ 2995.805864] [<ffffffff8105e497>] cpu_startup_entry+0xfc/0x148
> [ 2995.805868] [<ffffffff813252de>] rest_init+0x72/0x74
> [ 2995.805873] [<ffffffff81686cd0>] start_kernel+0x3d7/0x3e2
> [ 2995.805877] [<ffffffff81686748>] ? do_early_param+0x93/0x93
> [ 2995.805881] [<ffffffff8168647f>] x86_64_start_reservations+0x2a/0x2c
> [ 2995.805885] [<ffffffff81686548>] x86_64_start_kernel+0xc7/0xca
> [ 2995.805887] ---[ end trace fd899d2b4fca47a0 ]---
> [ 2995.805901] e1000e 0000:00:19.0 em2: Reset adapter unexpectedly
> [ 2999.697213] e1000e: em2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
> [ 3949.321404] UDP: bad checksum. From 87.114.227.207:53185 to 84.209.201.2:51413 ulen 40
> [ 6117.966435] UDP: bad checksum. From 109.61.95.12:62354 to 84.209.201.2:51413 ulen 114
> [ 6520.077066] e1000e 0000:00:19.0 em2: Detected Hardware Unit Hang:
> [ 6520.077066] TDH <26>
> [ 6520.077066] TDT <33>
> [ 6520.077066] next_to_use <33>
> [ 6520.077066] next_to_clean <24>
> [ 6520.077066] buffer_info[next_to_clean]:
> [ 6520.077066] time_stamp <10017b369>
> [ 6520.077066] next_to_watch <26>
> [ 6520.077066] jiffies <10017b623>
> [ 6520.077066] next_to_watch.status <0>
> [ 6520.077066] MAC Status <80083>
> [ 6520.077066] PHY Status <796d>
> [ 6520.077066] PHY 1000BASE-T Status <7800>
> [ 6520.077066] PHY Extended Status <3000>
> [ 6520.077066] PCI Status <10>
> [ 6522.078332] e1000e 0000:00:19.0 em2: Detected Hardware Unit Hang:
> [ 6522.078332] TDH <26>
> [ 6522.078332] TDT <33>
> [ 6522.078332] next_to_use <33>
> [ 6522.078332] next_to_clean <24>
> [ 6522.078332] buffer_info[next_to_clean]:
> [ 6522.078332] time_stamp <10017b369>
> [ 6522.078332] next_to_watch <26>
> [ 6522.078332] jiffies <10017b817>
> [ 6522.078332] next_to_watch.status <0>
> [ 6522.078332] MAC Status <80083>
> [ 6522.078332] PHY Status <796d>
> [ 6522.078332] PHY 1000BASE-T Status <7800>
> [ 6522.078332] PHY Extended Status <3000>
> [ 6522.078332] PCI Status <10>
> [ 6524.079633] e1000e 0000:00:19.0 em2: Detected Hardware Unit Hang:
> [ 6524.079633] TDH <26>
> [ 6524.079633] TDT <33>
> [ 6524.079633] next_to_use <33>
> [ 6524.079633] next_to_clean <24>
> [ 6524.079633] buffer_info[next_to_clean]:
> [ 6524.079633] time_stamp <10017b369>
> [ 6524.079633] next_to_watch <26>
> [ 6524.079633] jiffies <10017ba0b>
> [ 6524.079633] next_to_watch.status <0>
> [ 6524.079633] MAC Status <80083>
> [ 6524.079633] PHY Status <796d>
> [ 6524.079633] PHY 1000BASE-T Status <7800>
> [ 6524.079633] PHY Extended Status <3000>
> [ 6524.079633] PCI Status <10>
> [ 6526.080929] e1000e 0000:00:19.0 em2: Detected Hardware Unit Hang:
> [ 6526.080929] TDH <26>
> [ 6526.080929] TDT <33>
> [ 6526.080929] next_to_use <33>
> [ 6526.080929] next_to_clean <24>
> [ 6526.080929] buffer_info[next_to_clean]:
> [ 6526.080929] time_stamp <10017b369>
> [ 6526.080929] next_to_watch <26>
> [ 6526.080929] jiffies <10017bbff>
> [ 6526.080929] next_to_watch.status <0>
> [ 6526.080929] MAC Status <80083>
> [ 6526.080929] PHY Status <796d>
> [ 6526.080929] PHY 1000BASE-T Status <7800>
> [ 6526.080929] PHY Extended Status <3000>
> [ 6526.080929] PCI Status <10>
> [ 6527.092694] e1000e 0000:00:19.0 em2: Reset adapter unexpectedly
> [ 6530.984252] e1000e: em2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
prev parent reply other threads:[~2013-10-12 15:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-12 13:25 3.12-git Intel e1000e hardware unit hang / tx queue timeouts Andre Tomt
2013-10-12 15:30 ` Andre Tomt [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52596AFE.8050800@tomt.net \
--to=andre@tomt.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.