From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Soren Brinkmann <soren.brinkmann@xilinx.com>,
<netdev@vger.kernel.org>, David Miller <davem@davemloft.net>
Cc: <linux-kernel@vger.kernel.org>, Michal Simek <michal.simek@xilinx.com>
Subject: Re: [PATCH RFC 2/5] net: macb: Migrate to devm clock interface
Date: Tue, 15 Oct 2013 09:44:37 +0200 [thread overview]
Message-ID: <525CF265.20506@atmel.com> (raw)
In-Reply-To: <1381795140-10792-3-git-send-email-soren.brinkmann@xilinx.com>
On 15/10/2013 01:58, Soren Brinkmann :
> Migrate to using the device managed intreface for clocks and clean up
> the associated error paths.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> drivers/net/ethernet/cadence/macb.c | 32 ++++++++++++++++++++------------
> 1 file changed, 20 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
> index 389ccf1362d5..62aa136889a4 100644
> --- a/drivers/net/ethernet/cadence/macb.c
> +++ b/drivers/net/ethernet/cadence/macb.c
> @@ -1790,19 +1790,31 @@ static int __init macb_probe(struct platform_device *pdev)
> spin_lock_init(&bp->lock);
> INIT_WORK(&bp->tx_error_task, macb_tx_error_task);
>
> - bp->pclk = clk_get(&pdev->dev, "pclk");
> + bp->pclk = devm_clk_get(&pdev->dev, "pclk");
> if (IS_ERR(bp->pclk)) {
> - dev_err(&pdev->dev, "failed to get macb_clk\n");
> + err = PTR_ERR(bp->pclk);
> + dev_err(&pdev->dev, "failed to get macb_clk (%u)\n", err);
> goto err_out_free_dev;
> }
> - clk_prepare_enable(bp->pclk);
>
> - bp->hclk = clk_get(&pdev->dev, "hclk");
> + bp->hclk = devm_clk_get(&pdev->dev, "hclk");
> if (IS_ERR(bp->hclk)) {
> - dev_err(&pdev->dev, "failed to get hclk\n");
> - goto err_out_put_pclk;
> + err = PTR_ERR(bp->hclk);
> + dev_err(&pdev->dev, "failed to get hclk (%u)\n", err);
> + goto err_out_free_dev;
> + }
> +
> + err = clk_prepare_enable(bp->pclk);
> + if (err) {
> + dev_err(&pdev->dev, "failed to enable pclk (%u)\n", err);
> + goto err_out_free_dev;
> + }
> +
> + err = clk_prepare_enable(bp->hclk);
> + if (err) {
> + dev_err(&pdev->dev, "failed to enable hclk (%u)\n", err);
> + goto err_out_disable_pclk;
> }
> - clk_prepare_enable(bp->hclk);
>
> bp->regs = ioremap(regs->start, resource_size(regs));
> if (!bp->regs) {
> @@ -1908,10 +1920,8 @@ err_out_iounmap:
> iounmap(bp->regs);
> err_out_disable_clocks:
> clk_disable_unprepare(bp->hclk);
> - clk_put(bp->hclk);
> +err_out_disable_pclk:
> clk_disable_unprepare(bp->pclk);
> -err_out_put_pclk:
> - clk_put(bp->pclk);
> err_out_free_dev:
> free_netdev(dev);
> err_out:
> @@ -1936,9 +1946,7 @@ static int __exit macb_remove(struct platform_device *pdev)
> free_irq(dev->irq, dev);
> iounmap(bp->regs);
> clk_disable_unprepare(bp->hclk);
> - clk_put(bp->hclk);
> clk_disable_unprepare(bp->pclk);
> - clk_put(bp->pclk);
> free_netdev(dev);
> }
>
>
--
Nicolas Ferre
next prev parent reply other threads:[~2013-10-15 7:44 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-14 23:58 [PATCH RFC 0/5] Ethernet support for Zynq Soren Brinkmann
2013-10-14 23:58 ` [PATCH RFC 1/5] net: macb: Migrate to dev_pm_ops Soren Brinkmann
2013-10-15 7:41 ` Nicolas Ferre
2013-10-14 23:58 ` [PATCH RFC 2/5] net: macb: Migrate to devm clock interface Soren Brinkmann
2013-10-15 7:44 ` Nicolas Ferre [this message]
2013-10-14 23:58 ` [PATCH RFC 3/5] net: macb: Use devm_ioremap() Soren Brinkmann
2013-10-15 7:45 ` Nicolas Ferre
2013-10-14 23:58 ` [PATCH RFC 4/5] net: macb: Use devm_request_irq() Soren Brinkmann
2013-10-15 7:46 ` Nicolas Ferre
2013-10-15 19:21 ` Sergei Shtylyov
2013-10-15 20:20 ` Sören Brinkmann
2013-10-15 20:38 ` Sergei Shtylyov
2013-10-14 23:59 ` [PATCH RFC 5/5] net: macb: Adjust tx_clk when link speed changes Soren Brinkmann
2013-10-15 7:54 ` Nicolas Ferre
2013-10-15 7:58 ` Michal Simek
2013-10-15 15:34 ` Sören Brinkmann
2013-11-22 19:31 ` Sören Brinkmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=525CF265.20506@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=netdev@vger.kernel.org \
--cc=soren.brinkmann@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.