* [PATCH 1/3] ARM: at91/dt/trivial: use macro for AES irq type @ 2013-10-14 16:46 ` Nicolas Ferre 0 siblings, 0 replies; 15+ messages in thread From: Nicolas Ferre @ 2013-10-14 16:46 UTC (permalink / raw) To: linux-arm-kernel, ebenard Cc: linux-kernel, linux-crypto, herbert, Nicolas Ferre Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/sama5d3.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index ca956b6..b2aabff 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -350,7 +350,7 @@ aes@f8038000 { compatible = "atmel,sam9g46-aes"; reg = <0xf8038000 0x100>; - interrupts = <43 4 0>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; }; tdes@f803c000 { -- 1.8.2.2 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 1/3] ARM: at91/dt/trivial: use macro for AES irq type @ 2013-10-14 16:46 ` Nicolas Ferre 0 siblings, 0 replies; 15+ messages in thread From: Nicolas Ferre @ 2013-10-14 16:46 UTC (permalink / raw) To: linux-arm-kernel, ebenard Cc: linux-kernel, linux-crypto, herbert, Nicolas Ferre Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/sama5d3.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index ca956b6..b2aabff 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -350,7 +350,7 @@ aes@f8038000 { compatible = "atmel,sam9g46-aes"; reg = <0xf8038000 0x100>; - interrupts = <43 4 0>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; }; tdes@f803c000 { -- 1.8.2.2 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 1/3] ARM: at91/dt/trivial: use macro for AES irq type @ 2013-10-14 16:46 ` Nicolas Ferre 0 siblings, 0 replies; 15+ messages in thread From: Nicolas Ferre @ 2013-10-14 16:46 UTC (permalink / raw) To: linux-arm-kernel Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/sama5d3.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index ca956b6..b2aabff 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -350,7 +350,7 @@ aes at f8038000 { compatible = "atmel,sam9g46-aes"; reg = <0xf8038000 0x100>; - interrupts = <43 4 0>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; }; tdes at f803c000 { -- 1.8.2.2 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 2/3] ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix 2013-10-14 16:46 ` Nicolas Ferre (?) @ 2013-10-14 16:46 ` Nicolas Ferre -1 siblings, 0 replies; 15+ messages in thread From: Nicolas Ferre @ 2013-10-14 16:46 UTC (permalink / raw) To: linux-arm-kernel, ebenard Cc: linux-kernel, linux-crypto, herbert, Nicolas Ferre Change the sha/aes/tdes compatibility string to match common case for the at91sam9g45 family which is to keep the at91 prefix. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/sama5d3.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index b2aabff..99bd4a6 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -342,19 +342,19 @@ }; sha@f8034000 { - compatible = "atmel,sam9g46-sha"; + compatible = "atmel,at91sam9g46-sha"; reg = <0xf8034000 0x100>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; }; aes@f8038000 { - compatible = "atmel,sam9g46-aes"; + compatible = "atmel,at91sam9g46-aes"; reg = <0xf8038000 0x100>; interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; }; tdes@f803c000 { - compatible = "atmel,sam9g46-tdes"; + compatible = "atmel,at91sam9g46-tdes"; reg = <0xf803c000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; }; -- 1.8.2.2 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 2/3] ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix @ 2013-10-14 16:46 ` Nicolas Ferre 0 siblings, 0 replies; 15+ messages in thread From: Nicolas Ferre @ 2013-10-14 16:46 UTC (permalink / raw) To: linux-arm-kernel, ebenard Cc: linux-kernel, linux-crypto, herbert, Nicolas Ferre Change the sha/aes/tdes compatibility string to match common case for the at91sam9g45 family which is to keep the at91 prefix. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/sama5d3.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index b2aabff..99bd4a6 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -342,19 +342,19 @@ }; sha@f8034000 { - compatible = "atmel,sam9g46-sha"; + compatible = "atmel,at91sam9g46-sha"; reg = <0xf8034000 0x100>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; }; aes@f8038000 { - compatible = "atmel,sam9g46-aes"; + compatible = "atmel,at91sam9g46-aes"; reg = <0xf8038000 0x100>; interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; }; tdes@f803c000 { - compatible = "atmel,sam9g46-tdes"; + compatible = "atmel,at91sam9g46-tdes"; reg = <0xf803c000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; }; -- 1.8.2.2 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 2/3] ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix @ 2013-10-14 16:46 ` Nicolas Ferre 0 siblings, 0 replies; 15+ messages in thread From: Nicolas Ferre @ 2013-10-14 16:46 UTC (permalink / raw) To: linux-arm-kernel Change the sha/aes/tdes compatibility string to match common case for the at91sam9g45 family which is to keep the at91 prefix. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/sama5d3.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index b2aabff..99bd4a6 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -342,19 +342,19 @@ }; sha at f8034000 { - compatible = "atmel,sam9g46-sha"; + compatible = "atmel,at91sam9g46-sha"; reg = <0xf8034000 0x100>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; }; aes at f8038000 { - compatible = "atmel,sam9g46-aes"; + compatible = "atmel,at91sam9g46-aes"; reg = <0xf8038000 0x100>; interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; }; tdes at f803c000 { - compatible = "atmel,sam9g46-tdes"; + compatible = "atmel,at91sam9g46-tdes"; reg = <0xf803c000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; }; -- 1.8.2.2 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 2/3] ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix 2013-10-14 16:46 ` Nicolas Ferre (?) @ 2013-10-14 17:09 ` Jean-Christophe PLAGNIOL-VILLARD -1 siblings, 0 replies; 15+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-10-14 17:09 UTC (permalink / raw) To: Nicolas Ferre Cc: linux-crypto, linux-kernel, ebenard, linux-arm-kernel, herbert On 18:46 Mon 14 Oct , Nicolas Ferre wrote: > Change the sha/aes/tdes compatibility string to match common > case for the at91sam9g45 family which is to keep the at91 prefix. > > Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> > --- > arch/arm/boot/dts/sama5d3.dtsi | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi > index b2aabff..99bd4a6 100644 > --- a/arch/arm/boot/dts/sama5d3.dtsi > +++ b/arch/arm/boot/dts/sama5d3.dtsi > @@ -342,19 +342,19 @@ > }; > > sha@f8034000 { > - compatible = "atmel,sam9g46-sha"; > + compatible = "atmel,at91sam9g46-sha"; > reg = <0xf8034000 0x100>; > interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; > }; > > aes@f8038000 { > - compatible = "atmel,sam9g46-aes"; > + compatible = "atmel,at91sam9g46-aes"; > reg = <0xf8038000 0x100>; > interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; > }; > > tdes@f803c000 { > - compatible = "atmel,sam9g46-tdes"; > + compatible = "atmel,at91sam9g46-tdes"; > reg = <0xf803c000 0x100>; > interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; you keep the previous compatible in the driver too for backword compatiblity Best Regards, J. > }; > -- > 1.8.2.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/3] ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix @ 2013-10-14 17:09 ` Jean-Christophe PLAGNIOL-VILLARD 0 siblings, 0 replies; 15+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-10-14 17:09 UTC (permalink / raw) To: Nicolas Ferre Cc: linux-arm-kernel, ebenard, herbert, linux-kernel, linux-crypto On 18:46 Mon 14 Oct , Nicolas Ferre wrote: > Change the sha/aes/tdes compatibility string to match common > case for the at91sam9g45 family which is to keep the at91 prefix. > > Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> > --- > arch/arm/boot/dts/sama5d3.dtsi | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi > index b2aabff..99bd4a6 100644 > --- a/arch/arm/boot/dts/sama5d3.dtsi > +++ b/arch/arm/boot/dts/sama5d3.dtsi > @@ -342,19 +342,19 @@ > }; > > sha@f8034000 { > - compatible = "atmel,sam9g46-sha"; > + compatible = "atmel,at91sam9g46-sha"; > reg = <0xf8034000 0x100>; > interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; > }; > > aes@f8038000 { > - compatible = "atmel,sam9g46-aes"; > + compatible = "atmel,at91sam9g46-aes"; > reg = <0xf8038000 0x100>; > interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; > }; > > tdes@f803c000 { > - compatible = "atmel,sam9g46-tdes"; > + compatible = "atmel,at91sam9g46-tdes"; > reg = <0xf803c000 0x100>; > interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; you keep the previous compatible in the driver too for backword compatiblity Best Regards, J. > }; > -- > 1.8.2.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 2/3] ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix @ 2013-10-14 17:09 ` Jean-Christophe PLAGNIOL-VILLARD 0 siblings, 0 replies; 15+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-10-14 17:09 UTC (permalink / raw) To: linux-arm-kernel On 18:46 Mon 14 Oct , Nicolas Ferre wrote: > Change the sha/aes/tdes compatibility string to match common > case for the at91sam9g45 family which is to keep the at91 prefix. > > Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> > --- > arch/arm/boot/dts/sama5d3.dtsi | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi > index b2aabff..99bd4a6 100644 > --- a/arch/arm/boot/dts/sama5d3.dtsi > +++ b/arch/arm/boot/dts/sama5d3.dtsi > @@ -342,19 +342,19 @@ > }; > > sha at f8034000 { > - compatible = "atmel,sam9g46-sha"; > + compatible = "atmel,at91sam9g46-sha"; > reg = <0xf8034000 0x100>; > interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; > }; > > aes at f8038000 { > - compatible = "atmel,sam9g46-aes"; > + compatible = "atmel,at91sam9g46-aes"; > reg = <0xf8038000 0x100>; > interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; > }; > > tdes at f803c000 { > - compatible = "atmel,sam9g46-tdes"; > + compatible = "atmel,at91sam9g46-tdes"; > reg = <0xf803c000 0x100>; > interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; you keep the previous compatible in the driver too for backword compatiblity Best Regards, J. > }; > -- > 1.8.2.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/3] ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix 2013-10-14 17:09 ` Jean-Christophe PLAGNIOL-VILLARD (?) @ 2013-10-15 8:14 ` Nicolas Ferre -1 siblings, 0 replies; 15+ messages in thread From: Nicolas Ferre @ 2013-10-15 8:14 UTC (permalink / raw) To: Jean-Christophe PLAGNIOL-VILLARD Cc: linux-arm-kernel, ebenard, herbert, linux-kernel, linux-crypto On 14/10/2013 19:09, Jean-Christophe PLAGNIOL-VILLARD : > On 18:46 Mon 14 Oct , Nicolas Ferre wrote: >> Change the sha/aes/tdes compatibility string to match common >> case for the at91sam9g45 family which is to keep the at91 prefix. >> >> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> >> --- >> arch/arm/boot/dts/sama5d3.dtsi | 6 +++--- >> 1 file changed, 3 insertions(+), 3 deletions(-) >> >> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi >> index b2aabff..99bd4a6 100644 >> --- a/arch/arm/boot/dts/sama5d3.dtsi >> +++ b/arch/arm/boot/dts/sama5d3.dtsi >> @@ -342,19 +342,19 @@ >> }; >> >> sha@f8034000 { >> - compatible = "atmel,sam9g46-sha"; >> + compatible = "atmel,at91sam9g46-sha"; >> reg = <0xf8034000 0x100>; >> interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; >> }; >> >> aes@f8038000 { >> - compatible = "atmel,sam9g46-aes"; >> + compatible = "atmel,at91sam9g46-aes"; >> reg = <0xf8038000 0x100>; >> interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; >> }; >> >> tdes@f803c000 { >> - compatible = "atmel,sam9g46-tdes"; >> + compatible = "atmel,at91sam9g46-tdes"; >> reg = <0xf803c000 0x100>; >> interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; > you keep the previous compatible in the driver too for backword compatiblity No, as the consumer of the old compatibility string has never been sent to mainline (or even mailing-list) and as the "dma" property is not compatible with the one existing on our 3.6.9-based kernel. So, anyway the DT has to be changed for a move from 3.6.9 => 3.10. As I do not want to bloat the DT forever, let's stick with this new compatibility string. Bye, >> }; >> -- >> 1.8.2.2 >> >> >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-kernel@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/3] ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix @ 2013-10-15 8:14 ` Nicolas Ferre 0 siblings, 0 replies; 15+ messages in thread From: Nicolas Ferre @ 2013-10-15 8:14 UTC (permalink / raw) To: Jean-Christophe PLAGNIOL-VILLARD Cc: linux-arm-kernel, ebenard, herbert, linux-kernel, linux-crypto On 14/10/2013 19:09, Jean-Christophe PLAGNIOL-VILLARD : > On 18:46 Mon 14 Oct , Nicolas Ferre wrote: >> Change the sha/aes/tdes compatibility string to match common >> case for the at91sam9g45 family which is to keep the at91 prefix. >> >> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> >> --- >> arch/arm/boot/dts/sama5d3.dtsi | 6 +++--- >> 1 file changed, 3 insertions(+), 3 deletions(-) >> >> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi >> index b2aabff..99bd4a6 100644 >> --- a/arch/arm/boot/dts/sama5d3.dtsi >> +++ b/arch/arm/boot/dts/sama5d3.dtsi >> @@ -342,19 +342,19 @@ >> }; >> >> sha@f8034000 { >> - compatible = "atmel,sam9g46-sha"; >> + compatible = "atmel,at91sam9g46-sha"; >> reg = <0xf8034000 0x100>; >> interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; >> }; >> >> aes@f8038000 { >> - compatible = "atmel,sam9g46-aes"; >> + compatible = "atmel,at91sam9g46-aes"; >> reg = <0xf8038000 0x100>; >> interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; >> }; >> >> tdes@f803c000 { >> - compatible = "atmel,sam9g46-tdes"; >> + compatible = "atmel,at91sam9g46-tdes"; >> reg = <0xf803c000 0x100>; >> interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; > you keep the previous compatible in the driver too for backword compatiblity No, as the consumer of the old compatibility string has never been sent to mainline (or even mailing-list) and as the "dma" property is not compatible with the one existing on our 3.6.9-based kernel. So, anyway the DT has to be changed for a move from 3.6.9 => 3.10. As I do not want to bloat the DT forever, let's stick with this new compatibility string. Bye, >> }; >> -- >> 1.8.2.2 >> >> >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-kernel@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 2/3] ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix @ 2013-10-15 8:14 ` Nicolas Ferre 0 siblings, 0 replies; 15+ messages in thread From: Nicolas Ferre @ 2013-10-15 8:14 UTC (permalink / raw) To: linux-arm-kernel On 14/10/2013 19:09, Jean-Christophe PLAGNIOL-VILLARD : > On 18:46 Mon 14 Oct , Nicolas Ferre wrote: >> Change the sha/aes/tdes compatibility string to match common >> case for the at91sam9g45 family which is to keep the at91 prefix. >> >> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> >> --- >> arch/arm/boot/dts/sama5d3.dtsi | 6 +++--- >> 1 file changed, 3 insertions(+), 3 deletions(-) >> >> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi >> index b2aabff..99bd4a6 100644 >> --- a/arch/arm/boot/dts/sama5d3.dtsi >> +++ b/arch/arm/boot/dts/sama5d3.dtsi >> @@ -342,19 +342,19 @@ >> }; >> >> sha at f8034000 { >> - compatible = "atmel,sam9g46-sha"; >> + compatible = "atmel,at91sam9g46-sha"; >> reg = <0xf8034000 0x100>; >> interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; >> }; >> >> aes at f8038000 { >> - compatible = "atmel,sam9g46-aes"; >> + compatible = "atmel,at91sam9g46-aes"; >> reg = <0xf8038000 0x100>; >> interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; >> }; >> >> tdes at f803c000 { >> - compatible = "atmel,sam9g46-tdes"; >> + compatible = "atmel,at91sam9g46-tdes"; >> reg = <0xf803c000 0x100>; >> interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; > you keep the previous compatible in the driver too for backword compatiblity No, as the consumer of the old compatibility string has never been sent to mainline (or even mailing-list) and as the "dma" property is not compatible with the one existing on our 3.6.9-based kernel. So, anyway the DT has to be changed for a move from 3.6.9 => 3.10. As I do not want to bloat the DT forever, let's stick with this new compatibility string. Bye, >> }; >> -- >> 1.8.2.2 >> >> >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-kernel at lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 3/3] ARM: at91/dt/sama5d3: add DMA information to SHA/AES/TDES nodes 2013-10-14 16:46 ` Nicolas Ferre (?) @ 2013-10-14 16:46 ` Nicolas Ferre -1 siblings, 0 replies; 15+ messages in thread From: Nicolas Ferre @ 2013-10-14 16:46 UTC (permalink / raw) To: linux-arm-kernel, ebenard Cc: linux-kernel, linux-crypto, herbert, Nicolas Ferre Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/sama5d3.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 99bd4a6..aca3893 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -345,18 +345,26 @@ compatible = "atmel,at91sam9g46-sha"; reg = <0xf8034000 0x100>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>; + dma-names = "tx"; }; aes@f8038000 { compatible = "atmel,at91sam9g46-aes"; reg = <0xf8038000 0x100>; interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(19)>; + dma-names = "tx", "rx"; }; tdes@f803c000 { compatible = "atmel,at91sam9g46-tdes"; reg = <0xf803c000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(21)>; + dma-names = "tx", "rx"; }; dma0: dma-controller@ffffe600 { -- 1.8.2.2 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 3/3] ARM: at91/dt/sama5d3: add DMA information to SHA/AES/TDES nodes @ 2013-10-14 16:46 ` Nicolas Ferre 0 siblings, 0 replies; 15+ messages in thread From: Nicolas Ferre @ 2013-10-14 16:46 UTC (permalink / raw) To: linux-arm-kernel, ebenard Cc: linux-kernel, linux-crypto, herbert, Nicolas Ferre Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/sama5d3.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 99bd4a6..aca3893 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -345,18 +345,26 @@ compatible = "atmel,at91sam9g46-sha"; reg = <0xf8034000 0x100>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>; + dma-names = "tx"; }; aes@f8038000 { compatible = "atmel,at91sam9g46-aes"; reg = <0xf8038000 0x100>; interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(19)>; + dma-names = "tx", "rx"; }; tdes@f803c000 { compatible = "atmel,at91sam9g46-tdes"; reg = <0xf803c000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(21)>; + dma-names = "tx", "rx"; }; dma0: dma-controller@ffffe600 { -- 1.8.2.2 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 3/3] ARM: at91/dt/sama5d3: add DMA information to SHA/AES/TDES nodes @ 2013-10-14 16:46 ` Nicolas Ferre 0 siblings, 0 replies; 15+ messages in thread From: Nicolas Ferre @ 2013-10-14 16:46 UTC (permalink / raw) To: linux-arm-kernel Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/sama5d3.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 99bd4a6..aca3893 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -345,18 +345,26 @@ compatible = "atmel,at91sam9g46-sha"; reg = <0xf8034000 0x100>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>; + dma-names = "tx"; }; aes at f8038000 { compatible = "atmel,at91sam9g46-aes"; reg = <0xf8038000 0x100>; interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(19)>; + dma-names = "tx", "rx"; }; tdes at f803c000 { compatible = "atmel,at91sam9g46-tdes"; reg = <0xf803c000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(21)>; + dma-names = "tx", "rx"; }; dma0: dma-controller at ffffe600 { -- 1.8.2.2 ^ permalink raw reply related [flat|nested] 15+ messages in thread
end of thread, other threads:[~2013-10-15 8:14 UTC | newest] Thread overview: 15+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-10-14 16:46 [PATCH 1/3] ARM: at91/dt/trivial: use macro for AES irq type Nicolas Ferre 2013-10-14 16:46 ` Nicolas Ferre 2013-10-14 16:46 ` Nicolas Ferre 2013-10-14 16:46 ` [PATCH 2/3] ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix Nicolas Ferre 2013-10-14 16:46 ` Nicolas Ferre 2013-10-14 16:46 ` Nicolas Ferre 2013-10-14 17:09 ` Jean-Christophe PLAGNIOL-VILLARD 2013-10-14 17:09 ` Jean-Christophe PLAGNIOL-VILLARD 2013-10-14 17:09 ` Jean-Christophe PLAGNIOL-VILLARD 2013-10-15 8:14 ` Nicolas Ferre 2013-10-15 8:14 ` Nicolas Ferre 2013-10-15 8:14 ` Nicolas Ferre 2013-10-14 16:46 ` [PATCH 3/3] ARM: at91/dt/sama5d3: add DMA information to SHA/AES/TDES nodes Nicolas Ferre 2013-10-14 16:46 ` Nicolas Ferre 2013-10-14 16:46 ` Nicolas Ferre
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.