From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-mpc85xx/master
Date: Wed, 16 Oct 2013 17:30:34 -0700 [thread overview]
Message-ID: <525F2FAA.6090307@freescale.com> (raw)
Tom,
The following changes since commit 183acb700378a8cfc5d50a01a65de93fb2c24586:
Prepare v2013.10 (2013-10-16 13:08:12 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
for you to fetch changes up to 287df01e6aef0464c5e5bcbd7e87aa4ff1f24f5a:
PCIe:change the method to get the address of a requested capability in
configuration space. (2013-10-16 16:15:17 -0700)
----------------------------------------------------------------
Po Liu (3):
powerpc: add CONFIG_SECURE_BOOT condition into fsl_secure_boot.h
powerpc:c29xpcie: make ifc timing parameter flexible
powerpc/c29xpcie: modify DDR parameter to make DDR more stable
Prabhakar Kushwaha (6):
powerpc/mpc85xx:Make L2 cache type independent of CHASSIS2
powerpc/mpc85xx:Update processor defines for T1040
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator
board/bsc9131rdb: Update IFC timings for NAND flash
powerpc/t1040qds: Add T1040QDS board
boards/c29xpcie: Update TLB and LAW size for IFC NAND, CPLD
Priyanka Jain (1):
powerpc: Fix CamelCase warnings in DDR related code
Shaohui Xie (3):
powerpc/t4240: updated rcw_cfg to align with default hardware
configuration
powerpc/B4860: enable PBL tool for B4860
powerpc/tool/pbl: fix pbl image compiling process
Shengzhou Liu (4):
powerpc/p1010rdb: remove unused cpld_show
powerpc/eeprom: update MAX_NUM_PORTS to adapt non-256-bytes EEPROM
board/p1010rdb: add pin mux and sdhc support in any boot
powerpc/p1010rdb: add p1010rdb-pb support with updating p1010rdb-pa
Ying Zhang (3):
powerpc: p1_p2_rdb_pc: Enable p1_p2_rdb_pc to boot from SD Card
with SPL
powerpc : p1_p2_rdb_pc : Enable p1_p2_rdb_pc to start from eSPI
with SPL
powerpc: p1_p2_rdb_pc: add TPL for p1_p2_rdb_pc nand boot
York Sun (1):
powerpc/mpc85xx: Add workaround for erratum A006379
Zhao Qiang (3):
Corenet/p5040/SGMII:fix the problem for SGMII5/6
SGMII:fix PHY addresses for QSGMII Riser Card working in SGMII mode
PCIe:change the method to get the address of a requested
capability in configuration space.
ramneek mehresh (1):
powerpc/usb: Mention usb1 before usb2 inside default hwconfig string
Makefile | 1 +
arch/powerpc/cpu/mpc85xx/cmd_errata.c | 5 +
arch/powerpc/cpu/mpc85xx/cpu_init.c | 13 +-
arch/powerpc/cpu/mpc85xx/fdt.c | 2 +-
arch/powerpc/cpu/mpc85xx/speed.c | 114 +--
arch/powerpc/cpu/mpc85xx/start.S | 2 +-
.../powerpc/cpu/mpc8xxx/ddr/common_timing_params.h | 46 +-
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 76 +-
arch/powerpc/cpu/mpc8xxx/ddr/ddr.h | 2 +-
arch/powerpc/cpu/mpc8xxx/ddr/ddr1_dimm_params.c | 52 +-
arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c | 52 +-
arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c | 54 +-
arch/powerpc/cpu/mpc8xxx/ddr/interactive.c | 312 ++++----
.../cpu/mpc8xxx/ddr/lc_common_dimm_params.c | 214 +++---
arch/powerpc/cpu/mpc8xxx/ddr/main.c | 6 +-
arch/powerpc/cpu/mpc8xxx/ddr/options.c | 34 +-
arch/powerpc/include/asm/config_mpc85xx.h | 35 +-
arch/powerpc/include/asm/fsl_ddr_dimm_params.h | 48 +-
arch/powerpc/include/asm/fsl_ddr_sdram.h | 28 +-
arch/powerpc/include/asm/fsl_errata.h | 25 +
arch/powerpc/include/asm/fsl_pci.h | 18 -
arch/powerpc/include/asm/fsl_secure_boot.h | 2 +
arch/powerpc/include/asm/immap_512x.h | 4 +-
arch/powerpc/include/asm/immap_85xx.h | 22 +-
board/exmeritus/hww1u1a/ddr.c | 2 +-
board/freescale/b4860qds/b4860qds_qixis.h | 5 +
board/freescale/b4860qds/b4_pbi.cfg | 27 +
board/freescale/b4860qds/b4_rcw.cfg | 7 +
board/freescale/b4860qds/ddr.c | 32 +-
board/freescale/b4860qds/eth_b4860qds.c | 18 +
board/freescale/bsc9131rdb/ddr.c | 26 +-
board/freescale/bsc9132qds/ddr.c | 26 +-
board/freescale/c29xpcie/ddr.c | 28 +-
board/freescale/c29xpcie/law.c | 4 +-
board/freescale/c29xpcie/tlb.c | 4 +-
board/freescale/common/qixis.h | 4 +-
board/freescale/common/sys_eeprom.c | 4 +
board/freescale/corenet_ds/ddr.c | 6 +-
board/freescale/corenet_ds/eth_hydra.c | 6 +
board/freescale/corenet_ds/eth_p4080.c | 12 +
board/freescale/corenet_ds/eth_superhydra.c | 72 +-
board/freescale/mpc8349emds/ddr.c | 8 +-
board/freescale/mpc8540ads/ddr.c | 2 +-
board/freescale/mpc8544ds/ddr.c | 2 +-
board/freescale/mpc8560ads/ddr.c | 2 +-
board/freescale/mpc8572ds/ddr.c | 6 +-
board/freescale/mpc8610hpcd/ddr.c | 2 +-
board/freescale/mpc8641hpcn/ddr.c | 2 +-
board/freescale/p1010rdb/ddr.c | 26 +-
board/freescale/p1010rdb/law.c | 2 -
board/freescale/p1010rdb/p1010rdb.c | 330 +++++++--
board/freescale/p1010rdb/tlb.c | 4 -
board/freescale/p1022ds/ddr.c | 6 +-
board/freescale/p1023rdb/ddr.c | 26 +-
board/freescale/p1_p2_rdb_pc/Makefile | 3 +
board/freescale/p1_p2_rdb_pc/ddr.c | 130 ++--
board/freescale/p1_p2_rdb_pc/spl.c | 122 ++++
board/freescale/p1_p2_rdb_pc/spl_minimal.c | 83 +--
board/freescale/p1_p2_rdb_pc/tlb.c | 27 +-
board/freescale/p2020ds/ddr.c | 6 +-
board/freescale/p2041rdb/ddr.c | 6 +-
board/freescale/t1040qds/Makefile | 37 +
board/freescale/t1040qds/README | 169 +++++
board/freescale/t1040qds/ddr.c | 117 +++
board/freescale/t1040qds/ddr.h | 50 ++
board/freescale/t1040qds/law.c | 32 +
board/freescale/t1040qds/pci.c | 23 +
board/freescale/t1040qds/t1040qds.c | 255 +++++++
board/freescale/t1040qds/t1040qds.h | 13 +
board/freescale/t1040qds/t1040qds_qixis.h | 36 +
board/freescale/t1040qds/tlb.c | 108 +++
board/freescale/t4qds/ddr.c | 4 +-
board/freescale/t4qds/ddr.h | 2 +-
board/freescale/t4qds/t4_rcw.cfg | 8 +-
board/stx/stxgp3/ddr.c | 2 +-
board/stx/stxssa/ddr.c | 2 +-
board/xes/xpedite550x/ddr.c | 2 +-
boards.cfg | 43 +-
doc/README.pblimage | 15 +-
drivers/net/fm/Makefile | 1 +
drivers/net/fm/fm.h | 1 +
drivers/net/fm/init.c | 44 ++
drivers/net/fm/t1040.c | 16 +
drivers/pci/fsl_pci_init.c | 44 +-
drivers/pci/pci.c | 65 ++
include/configs/B4860QDS.h | 4 +-
include/configs/BSC9131RDB.h | 16 +-
include/configs/C29XPCIE.h | 8 +-
include/configs/P1010RDB.h | 118 ++-
include/configs/P2041RDB.h | 2 -
include/configs/T1040QDS.h | 761
++++++++++++++++++++
include/configs/T4240QDS.h | 2 -
include/configs/corenet_ds.h | 6 +-
include/configs/p1_p2_rdb_pc.h | 176 +++--
include/ddr_spd.h | 48 +-
include/fm_eth.h | 4 +
include/pci.h | 10 +
97 files changed, 3437 insertions(+), 1052 deletions(-)
create mode 100644 arch/powerpc/include/asm/fsl_errata.h
create mode 100644 board/freescale/b4860qds/b4_pbi.cfg
create mode 100644 board/freescale/b4860qds/b4_rcw.cfg
create mode 100644 board/freescale/p1_p2_rdb_pc/spl.c
create mode 100644 board/freescale/t1040qds/Makefile
create mode 100644 board/freescale/t1040qds/README
create mode 100644 board/freescale/t1040qds/ddr.c
create mode 100644 board/freescale/t1040qds/ddr.h
create mode 100644 board/freescale/t1040qds/law.c
create mode 100644 board/freescale/t1040qds/pci.c
create mode 100644 board/freescale/t1040qds/t1040qds.c
create mode 100644 board/freescale/t1040qds/t1040qds.h
create mode 100644 board/freescale/t1040qds/t1040qds_qixis.h
create mode 100644 board/freescale/t1040qds/tlb.c
create mode 100644 drivers/net/fm/t1040.c
create mode 100644 include/configs/T1040QDS.h
Thanks.
York
next reply other threads:[~2013-10-17 0:30 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-17 0:30 York Sun [this message]
2013-10-24 1:21 ` [U-Boot] Pull request: u-boot-mpc85xx/master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2019-06-20 9:44 [U-Boot] pull " Prabhakar Kushwaha
2019-06-21 1:53 ` Tom Rini
2019-08-27 11:01 Prabhakar Kushwaha
2019-08-27 17:19 ` Tom Rini
2019-08-29 5:22 Prabhakar Kushwaha
2019-08-30 1:36 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=525F2FAA.6090307@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.