From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 10/17] clk: at91: add peripheral clk macros for peripheral clk dt bindings
Date: Thu, 17 Oct 2013 18:03:17 +0200 [thread overview]
Message-ID: <52600A45.6070508@atmel.com> (raw)
In-Reply-To: <1381485180-13796-1-git-send-email-b.brezillon@overkiz.com>
On 11/10/2013 11:53, Boris BREZILLON :
> This patch adds the peripheral divisors macros (for sam9x5 compatible IPs)
> which will be used by peripheral clk dt definitions.
>
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> include/dt-bindings/clk/at91.h | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clk/at91.h
> index 0b4cb99..a3b07ca 100644
> --- a/include/dt-bindings/clk/at91.h
> +++ b/include/dt-bindings/clk/at91.h
> @@ -19,4 +19,10 @@
> #define AT91_PMC_MOSCRCS 17 /* Main On-Chip RC */
> #define AT91_PMC_CFDEV 18 /* Clock Failure Detector Event */
>
> +/* sam9x5 peripheral divisors */
> +#define AT91SAM9X5_PERIPH_CLK_DIV1 0
> +#define AT91SAM9X5_PERIPH_CLK_DIV2 1
> +#define AT91SAM9X5_PERIPH_CLK_DIV4 2
> +#define AT91SAM9X5_PERIPH_CLK_DIV8 3
> +
> #endif
>
--
Nicolas Ferre
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Boris BREZILLON <b.brezillon@overkiz.com>,
Rob Herring <rob.herring@calxeda.com>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Stephen Warren <swarren@wwwdotorg.org>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Rob Landley <rob@landley.net>, Andrew Victor <linux@maxim.org.za>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Russell King <linux@arm.linux.org.uk>,
Mike Turquette <mturquette@linaro.org>,
Felipe Balbi <balbi@ti.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Grant Likely <grant.likely@linaro.org>,
Ludovic Desroches <ludovic.desroches@atmel.com>,
Josh Wu <josh.wu@atmel.com>,
Richard Genoud <richard.genoud@gmail.com>
Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org
Subject: Re: [PATCH v4 10/17] clk: at91: add peripheral clk macros for peripheral clk dt bindings
Date: Thu, 17 Oct 2013 18:03:17 +0200 [thread overview]
Message-ID: <52600A45.6070508@atmel.com> (raw)
In-Reply-To: <1381485180-13796-1-git-send-email-b.brezillon@overkiz.com>
On 11/10/2013 11:53, Boris BREZILLON :
> This patch adds the peripheral divisors macros (for sam9x5 compatible IPs)
> which will be used by peripheral clk dt definitions.
>
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> include/dt-bindings/clk/at91.h | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clk/at91.h
> index 0b4cb99..a3b07ca 100644
> --- a/include/dt-bindings/clk/at91.h
> +++ b/include/dt-bindings/clk/at91.h
> @@ -19,4 +19,10 @@
> #define AT91_PMC_MOSCRCS 17 /* Main On-Chip RC */
> #define AT91_PMC_CFDEV 18 /* Clock Failure Detector Event */
>
> +/* sam9x5 peripheral divisors */
> +#define AT91SAM9X5_PERIPH_CLK_DIV1 0
> +#define AT91SAM9X5_PERIPH_CLK_DIV2 1
> +#define AT91SAM9X5_PERIPH_CLK_DIV4 2
> +#define AT91SAM9X5_PERIPH_CLK_DIV8 3
> +
> #endif
>
--
Nicolas Ferre
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Boris BREZILLON <b.brezillon@overkiz.com>,
Rob Herring <rob.herring@calxeda.com>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Stephen Warren <swarren@wwwdotorg.org>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Rob Landley <rob@landley.net>, Andrew Victor <linux@maxim.org.za>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Russell King <linux@arm.linux.org.uk>,
"Mike Turquette" <mturquette@linaro.org>,
Felipe Balbi <balbi@ti.com>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
Grant Likely <grant.likely@linaro.org>,
Ludovic Desroches <ludovic.desroches@atmel.com>,
Josh Wu <josh.wu@atmel.com>,
Richard Genoud <richard.genoud@gmail.com>
Cc: <devicetree@vger.kernel.org>, <linux-doc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-usb@vger.kernel.org>
Subject: Re: [PATCH v4 10/17] clk: at91: add peripheral clk macros for peripheral clk dt bindings
Date: Thu, 17 Oct 2013 18:03:17 +0200 [thread overview]
Message-ID: <52600A45.6070508@atmel.com> (raw)
In-Reply-To: <1381485180-13796-1-git-send-email-b.brezillon@overkiz.com>
On 11/10/2013 11:53, Boris BREZILLON :
> This patch adds the peripheral divisors macros (for sam9x5 compatible IPs)
> which will be used by peripheral clk dt definitions.
>
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> include/dt-bindings/clk/at91.h | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clk/at91.h
> index 0b4cb99..a3b07ca 100644
> --- a/include/dt-bindings/clk/at91.h
> +++ b/include/dt-bindings/clk/at91.h
> @@ -19,4 +19,10 @@
> #define AT91_PMC_MOSCRCS 17 /* Main On-Chip RC */
> #define AT91_PMC_CFDEV 18 /* Clock Failure Detector Event */
>
> +/* sam9x5 peripheral divisors */
> +#define AT91SAM9X5_PERIPH_CLK_DIV1 0
> +#define AT91SAM9X5_PERIPH_CLK_DIV2 1
> +#define AT91SAM9X5_PERIPH_CLK_DIV4 2
> +#define AT91SAM9X5_PERIPH_CLK_DIV8 3
> +
> #endif
>
--
Nicolas Ferre
next prev parent reply other threads:[~2013-10-17 16:03 UTC|newest]
Thread overview: 103+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-11 7:37 [PATCH v4 00/17] ARM: at91: move to common clk framework Boris BREZILLON
2013-10-11 7:37 ` Boris BREZILLON
2013-10-11 7:37 ` Boris BREZILLON
2013-10-11 7:37 ` [PATCH v4 01/17] ARM: at91: move at91_pmc.h to include/linux/clk/at91_pmc.h Boris BREZILLON
2013-10-11 7:37 ` Boris BREZILLON
2013-10-11 16:05 ` Felipe Balbi
2013-10-11 16:05 ` Felipe Balbi
2013-10-11 16:05 ` Felipe Balbi
2013-10-16 15:29 ` Nicolas Ferre
2013-10-16 15:29 ` Nicolas Ferre
2013-10-16 15:29 ` Nicolas Ferre
2013-10-11 7:37 ` [PATCH v4 02/17] ARM: at91: add Kconfig options for common clk support Boris BREZILLON
2013-10-11 7:37 ` Boris BREZILLON
2013-10-16 15:33 ` Nicolas Ferre
2013-10-16 15:33 ` Nicolas Ferre
2013-10-16 15:33 ` Nicolas Ferre
2013-10-11 7:37 ` [PATCH v4 03/17] clk: at91: add PMC base support Boris BREZILLON
2013-10-11 7:37 ` Boris BREZILLON
2013-10-17 15:46 ` Nicolas Ferre
2013-10-17 15:46 ` Nicolas Ferre
2013-10-17 15:46 ` Nicolas Ferre
2013-10-11 8:41 ` [PATCH v4 04/17] clk: at91: add PMC macro file for dt definitions Boris BREZILLON
2013-10-11 8:41 ` Boris BREZILLON
2013-10-17 15:47 ` Nicolas Ferre
2013-10-17 15:47 ` Nicolas Ferre
2013-10-17 15:47 ` Nicolas Ferre
2013-10-11 8:44 ` [PATCH v4 05/17] clk: at91: add PMC main clock Boris BREZILLON
2013-10-11 8:44 ` Boris BREZILLON
2013-10-11 8:44 ` Boris BREZILLON
2013-10-17 15:58 ` Nicolas Ferre
2013-10-17 15:58 ` Nicolas Ferre
2013-10-17 15:58 ` Nicolas Ferre
2013-10-11 8:48 ` [PATCH v4 06/17] clk: at91: add PMC pll clocks Boris BREZILLON
2013-10-11 8:48 ` Boris BREZILLON
2013-10-11 8:48 ` Boris BREZILLON
2013-10-17 15:59 ` Nicolas Ferre
2013-10-17 15:59 ` Nicolas Ferre
2013-10-17 15:59 ` Nicolas Ferre
2013-10-11 8:51 ` [PATCH v4 07/17] clk: at91: add PMC master clock Boris BREZILLON
2013-10-11 8:51 ` Boris BREZILLON
2013-10-17 15:59 ` Nicolas Ferre
2013-10-17 15:59 ` Nicolas Ferre
2013-10-17 15:59 ` Nicolas Ferre
2013-10-11 9:41 ` [PATCH v4 08/17] clk: at91: add PMC system clocks Boris BREZILLON
2013-10-11 9:41 ` Boris BREZILLON
2013-10-11 9:41 ` Boris BREZILLON
2013-10-17 15:59 ` Nicolas Ferre
2013-10-17 15:59 ` Nicolas Ferre
2013-10-17 15:59 ` Nicolas Ferre
2013-10-11 9:44 ` [PATCH v4 09/17] clk: at91: add PMC peripheral clocks Boris BREZILLON
2013-10-11 9:44 ` Boris BREZILLON
2013-10-17 16:02 ` Nicolas Ferre
2013-10-17 16:02 ` Nicolas Ferre
2013-10-17 16:02 ` Nicolas Ferre
2013-10-11 9:53 ` [PATCH v4 10/17] clk: at91: add peripheral clk macros for peripheral clk dt bindings Boris BREZILLON
2013-10-11 9:53 ` Boris BREZILLON
2013-10-11 9:53 ` Boris BREZILLON
2013-10-17 16:03 ` Nicolas Ferre [this message]
2013-10-17 16:03 ` Nicolas Ferre
2013-10-17 16:03 ` Nicolas Ferre
2013-10-11 9:57 ` [PATCH v4 11/17] clk: at91: add PMC programmable clocks Boris BREZILLON
2013-10-11 9:57 ` Boris BREZILLON
2013-10-11 9:57 ` Boris BREZILLON
2013-10-17 16:08 ` Nicolas Ferre
2013-10-17 16:08 ` Nicolas Ferre
2013-10-17 16:08 ` Nicolas Ferre
2013-10-11 10:22 ` [PATCH v4 12/17] clk: at91: add PMC utmi clock Boris BREZILLON
2013-10-11 10:22 ` Boris BREZILLON
2013-10-17 16:10 ` Nicolas Ferre
2013-10-17 16:10 ` Nicolas Ferre
2013-10-17 16:10 ` Nicolas Ferre
2013-10-11 11:15 ` [PATCH v4 13/17] clk: at91: add PMC usb clock Boris BREZILLON
2013-10-11 11:15 ` Boris BREZILLON
2013-10-17 16:18 ` Nicolas Ferre
2013-10-17 16:18 ` Nicolas Ferre
2013-10-17 16:18 ` Nicolas Ferre
2013-10-11 11:27 ` [PATCH v4 14/17] clk: at91: add PMC smd clock Boris BREZILLON
2013-10-11 11:27 ` Boris BREZILLON
2013-10-17 16:27 ` Nicolas Ferre
2013-10-17 16:27 ` Nicolas Ferre
2013-10-17 16:27 ` Nicolas Ferre
2013-10-17 16:55 ` [PATCH v5 13/17] clk: at91: add PMC usb clock Boris BREZILLON
2013-10-17 16:55 ` Boris BREZILLON
2013-10-17 16:55 ` Boris BREZILLON
2013-10-18 7:53 ` Nicolas Ferre
2013-10-18 7:53 ` Nicolas Ferre
2013-10-18 7:53 ` Nicolas Ferre
2013-10-11 11:38 ` [PATCH v4 15/17] clk: at91: add PMC clk device tree binding doc Boris BREZILLON
2013-10-11 11:38 ` Boris BREZILLON
2013-10-17 16:37 ` Nicolas Ferre
2013-10-17 16:37 ` Nicolas Ferre
2013-10-17 16:37 ` Nicolas Ferre
2013-10-11 11:46 ` [PATCH v4 16/17] ARM: at91: move pit timer to common clk framework Boris BREZILLON
2013-10-11 11:46 ` Boris BREZILLON
2013-10-11 11:49 ` [PATCH v4 17/17] ARM: at91: add new compatible strings for pmc driver Boris BREZILLON
2013-10-11 11:49 ` Boris BREZILLON
2013-10-11 11:49 ` Boris BREZILLON
2013-10-18 8:18 ` [PATCH v4 00/17] ARM: at91: move to common clk framework Nicolas Ferre
2013-10-18 8:18 ` Nicolas Ferre
2013-10-18 8:18 ` Nicolas Ferre
2013-11-07 23:29 ` Mike Turquette
2013-11-07 23:29 ` Mike Turquette
2013-11-07 23:29 ` Mike Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52600A45.6070508@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.