All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Peter Meerwald <pmeerw@pmeerw.net>, linux-iio@vger.kernel.org
Subject: Re: [PATCH v4 02/11] staging:iio:hmc5843: Rename _check_samp_freq to get_samp_freq_index
Date: Thu, 17 Oct 2013 23:47:46 +0100	[thread overview]
Message-ID: <52606912.7050109@kernel.org> (raw)
In-Reply-To: <1381961954-25596-3-git-send-email-pmeerw@pmeerw.net>

On 10/16/13 23:19, Peter Meerwald wrote:
> and drop/inline helper functions _check_int_plus_micros() and
> _show_int_plus_micros()
> 
> Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Applied to the togreg branch of iio.git

Technically this is addressing two different things so should really
have been two patches.


> ---
>  drivers/staging/iio/magnetometer/hmc5843.c | 47 ++++++++++--------------------
>  1 file changed, 16 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c
> index c56db41..749b0b6 100644
> --- a/drivers/staging/iio/magnetometer/hmc5843.c
> +++ b/drivers/staging/iio/magnetometer/hmc5843.c
> @@ -309,15 +309,17 @@ static IIO_DEVICE_ATTR(meas_conf,
>  			hmc5843_set_measurement_configuration,
>  			0);
>  
> -static ssize_t hmc5843_show_int_plus_micros(char *buf,
> -	const int (*vals)[2], int n)
> +static ssize_t hmc5843_show_samp_freq_avail(struct device *dev,
> +				struct device_attribute *attr, char *buf)
>  {
> +	struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev));
>  	size_t len = 0;
>  	int i;
>  
> -	for (i = 0; i < n; i++)
> +	for (i = 0; i < HMC5843_RATE_NOT_USED; i++)
>  		len += scnprintf(buf + len, PAGE_SIZE - len,
> -			"%d.%d ", vals[i][0], vals[i][1]);
> +			"%d.%d ", data->variant->regval_to_samp_freq[i][0],
> +			data->variant->regval_to_samp_freq[i][1]);
>  
>  	/* replace trailing space by newline */
>  	buf[len - 1] = '\n';
> @@ -325,28 +327,6 @@ static ssize_t hmc5843_show_int_plus_micros(char *buf,
>  	return len;
>  }
>  
> -static int hmc5843_check_int_plus_micros(const int (*vals)[2], int n,
> -					int val, int val2)
> -{
> -	int i;
> -
> -	for (i = 0; i < n; i++) {
> -		if (val == vals[i][0] && val2 == vals[i][1])
> -			return i;
> -	}
> -
> -	return -EINVAL;
> -}
> -
> -static ssize_t hmc5843_show_samp_freq_avail(struct device *dev,
> -				struct device_attribute *attr, char *buf)
> -{
> -	struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev));
> -
> -	return hmc5843_show_int_plus_micros(buf,
> -		data->variant->regval_to_samp_freq, HMC5843_RATE_NOT_USED);
> -}
> -
>  static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(hmc5843_show_samp_freq_avail);
>  
>  static s32 hmc5843_set_rate(struct hmc5843_data *data, u8 rate)
> @@ -357,12 +337,17 @@ static s32 hmc5843_set_rate(struct hmc5843_data *data, u8 rate)
>  		reg_val);
>  }
>  
> -static int hmc5843_check_samp_freq(struct hmc5843_data *data,
> +static int hmc5843_get_samp_freq_index(struct hmc5843_data *data,
>  				   int val, int val2)
>  {
> -	return hmc5843_check_int_plus_micros(
> -		data->variant->regval_to_samp_freq, HMC5843_RATE_NOT_USED,
> -		val, val2);
> +	int i;
> +
> +	for (i = 0; i < HMC5843_RATE_NOT_USED; i++)
> +		if (val == data->variant->regval_to_samp_freq[i][0] &&
> +			val2 == data->variant->regval_to_samp_freq[i][1])
> +			return i;
> +
> +	return -EINVAL;
>  }
>  
>  static ssize_t hmc5843_show_scale_avail(struct device *dev,
> @@ -430,7 +415,7 @@ static int hmc5843_write_raw(struct iio_dev *indio_dev,
>  
>  	switch (mask) {
>  	case IIO_CHAN_INFO_SAMP_FREQ:
> -		rate = hmc5843_check_samp_freq(data, val, val2);
> +		rate = hmc5843_get_samp_freq_index(data, val, val2);
>  		if (rate < 0)
>  			return -EINVAL;
>  
> 

  reply	other threads:[~2013-10-17 21:47 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-16 22:19 [PATCH v4 00/11] hmc5843 cleanup Peter Meerwald
2013-10-16 22:19 ` [PATCH v4 01/11] staging:iio:hmc5843: Use SCALE instead of magn_range Peter Meerwald
2013-10-17 22:46   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 02/11] staging:iio:hmc5843: Rename _check_samp_freq to get_samp_freq_index Peter Meerwald
2013-10-17 22:47   ` Jonathan Cameron [this message]
2013-10-16 22:19 ` [PATCH v4 03/11] staging:iio:hmc5843: Always read all channels values otherwise no updates Peter Meerwald
2013-10-17 22:49   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 04/11] staging:iio:hmc5843: Add trigger handling Peter Meerwald
2013-10-17 22:49   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 05/11] staging:iio:hmc5843: Remove ability to change operating mode Peter Meerwald
2013-10-17 22:50   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 06/11] staging:iio:hmc5843: Rename _configure() to _set_mode() Peter Meerwald
2013-10-17 22:50   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 07/11] staging:iio:hmc5843: Reorganize _set_meas_conf() Peter Meerwald
2013-10-17 22:51   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 08/11] staging:iio:hmc5843: Rename _set_rate() to _set_samp_freq() Peter Meerwald
2013-10-17 22:52   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 09/11] staging:iio:hmc5843: Introduce _set_range_gain() Peter Meerwald
2013-10-17 22:52   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 10/11] staging:iio:hmc5843: Check initialization and chip identifier Peter Meerwald
2013-10-17 22:52   ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 11/11] staging:iio:hmc5843: Trivial cleanup Peter Meerwald
2013-10-17 22:53   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52606912.7050109@kernel.org \
    --to=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.