From: "Yannik Völker" <yannikv@yahoo.de>
To: Oleksij Rempel <linux@rempel-privat.de>
Cc: Pontus Fuchs <pontus.fuchs@gmail.com>, linux-wireless@vger.kernel.org
Subject: Re: ar5523 Gigaset USB Adapter 108 issue
Date: Fri, 18 Oct 2013 18:33:49 +0200 [thread overview]
Message-ID: <526162ED.8030901@yahoo.de> (raw)
In-Reply-To: <52615EFA.80902@rempel-privat.de>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Am 18.10.2013 18:16, schrieb Oleksij Rempel:
> Am 18.10.2013 17:38, schrieb Yannik Völker:
>> Am 18.10.2013 17:07, schrieb Oleksij Rempel:
>>> Am 18.10.2013 16:49, schrieb Alan Stern:
>>>> Yannik, you should always use Reply-To-All so that your
>>>> messages get sent to the mailing list and not just to me.
>>>>
>>>> On Thu, 17 Oct 2013, Yannik Völker wrote:
>>>>
>>>>> Am 07.08.2013 19:34, schrieb Alan Stern:
>>>>>> Please post two usbmon traces, one showing the failure
>>>>>> on your current system and the other showing the adapter
>>>>>> running correctly under a 32-bit kernel. Instructions
>>>>>> for usbmon are in the kernel source file
>>>>>> Documentation/usb/usbmon.txt.
>>>>> I never got it to work under a 32-bit kernel, i was just
>>>>> able to utilize a windows32 driver using ndiswrapper.
>>>>>
>>>>> Now i got it to "work". I randomly found out that the
>>>>> ar5523 driver actually works when you load it after you
>>>>> unload ndiswrapper so the following steps make it work: 1.
>>>>> modprobe ndiswrapper 2. plug in device 3. connect to wlan
>>>>> using ndiswrapper and disconnect again (might be optional)
>>>>> 4. modprobe -r ndiswrapper 5. modprobe ar5523 6. connect to
>>>>> wlan log for that is attatched as wlanthennative2.log
>>
>>
>>> It sounds like linux driver didn't recognised usb id and
>>> didn't uploaded firmware, or there was no firmware to upload.
>> there is firmware (/lib/firmware/ar5523.bin exists) but it does
>> not even get touched (i renamed the file and the error did not
>> change at all)
>
> find first usbid of your adapter (it will be changed after
> firmware upload). And try to force driver to use this id: modprobe
> -v ar5523 echo 07d1 3a0d > /sys/bus/usb/drivers/ar5523/new_id
>
> instead of "07d1 3a0d" use your id.
>
# lsusb
…
Bus 003 Device 011: ID 129b:160c CyberTAN Technology Siemens
S30853-S1038-R351 802.11g Wireless Adapter [Atheros AR5523]
…
# modprobe ar5523
# echo 129b 160c > /sys/bus/usb/drivers/ar5523/new_id
<plugging device in>
syslog:
Oct 18 18:27:47 yannik-desktop kernel: [ 8751.447784] usbcore:
registered new interface driver ar5523
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.036912] usb 3-14: new
high-speed USB device number 12 using xhci_hcd
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.053995] usb 3-14: New
USB device found, idVendor=129b, idProduct=160c
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054005] usb 3-14: New
USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054010] usb 3-14:
Product: AR5523
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054015] usb 3-14:
Manufacturer: Atheros Communications Inc
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054019] usb 3-14:
SerialNumber: 1.0
Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052313] usb 3-14:
timeout waiting for command 01 reply
Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052323] usb 3-14: could
not initialize adapter
Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052359] usb 3-14: RX USB
error -2.
Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052378] usb 3-14: error
- -1 when submitting rx urb
Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052504] ar5523: probe of
3-14:1.0 failed with error -110
> Besidy, what kernel version are you using? May be it is too old..
>
3.11.0-12-generic
it is my understanding that the ar5523 driver was included from 3.8 on.
- --
Yannik Völker
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=pzyI
-----END PGP SIGNATURE-----
next prev parent reply other threads:[~2013-10-18 16:33 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <526020B6.7080601@yahoo.de>
2013-10-18 14:49 ` ar5523 Gigaset USB Adapter 108 issue Alan Stern
2013-10-18 15:07 ` Oleksij Rempel
2013-10-18 15:38 ` Yannik Völker
2013-10-18 16:16 ` Oleksij Rempel
2013-10-18 16:33 ` Yannik Völker [this message]
2013-10-18 17:16 ` Oleksij Rempel
2013-10-19 12:18 ` Yannik Völker
2013-10-19 15:30 ` Oleksij Rempel
2013-10-19 23:53 ` Stefan Lippers-Hollmann
[not found] ` <5262BA7A.2050803@rempel-privat.de>
[not found] ` <5266C4C1.80408@yahoo.de>
2013-10-22 18:45 ` Oleksij Rempel
2013-10-24 12:46 ` Yannik Völker
2013-10-25 10:31 ` Pontus Fuchs
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=526162ED.8030901@yahoo.de \
--to=yannikv@yahoo.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linux@rempel-privat.de \
--cc=pontus.fuchs@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.