Re: [fsl-community-bsp-base][PATCH v2] README: Remove list of supported boards and link RN

[Alexandre Belloni <alexandre.belloni@free-electrons.com>]

Hi Daiane,

Just as a note on the Release notes:
http://freescale.github.io/doc/release-notes/current/index.html#default-u-boot

I don't think u-boot has ever been tested on the cfa boards. I think
there is only barebox support.

On 16/10/2013 13:58, Daiane Angolini wrote:
> Add link to Release Notes
>
> Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
> ---
>  README | 49 ++-----------------------------------------------
>  1 file changed, 2 insertions(+), 47 deletions(-)
>
> diff --git a/README b/README
> index db19009..75de4ac 100644
> --- a/README
> +++ b/README
> @@ -1,54 +1,9 @@
>  Freescale's Community Yocto BSP
>  ===============================
>  
> -This BSP is a community project and offer support for following
> -processors:
> +In order to know the supported boards, please, see the release notes at
>  
> - * i.MX23
> -
> -   * Freescale i.MX23 Evaluation Board (imx23evk)
> -   * OLIMEX iMX233-OLinuXino-Maxi (imx233-olinuxino-maxi)
> -   * OLIMEX iMX233-OLinuXino-Micro (imx233-olinuxino-micro)
> -   * OLIMEX iMX233-OLinuXino-Mini (imx233-olinuxino-mini)
> -
> - * i.MX28
> -
> -   * Freescale i.MX28 Evaluation Board (imx28evk)
> -   * CrystalFontz cfa-10036 (cfa10036)
> -   * CrystalFontz cfa-10036+cfa-10037 (cfa10037)
> -   * CrystalFontz cfa-10036+cfa-10049 (cfa10049)
> -   * CrystalFontz cfa-10036+cfa-10037+cfa-10055 (cfa10055)
> -   * CrystalFontz cfa-10036+cfa-10037+cfa-10056 (cfa10056)
> -   * CrystalFontz cfa-920 (cfa10057)
> -   * CrystalFontz cfa-921 (cfa10058)
> -
> - * i.MX31
> -
> -   * Freescale i.MX31 Platform Development Kit (imx31pdk)
> -
> -* i.MX35
> -
> -   * Freescale i.MX35 Platform Development Kit (imx35pdk)
> -
> - * i.MX51
> -
> -   * Freescale i.MX51 Evaluation Kit (imx51evk)
> -
> - * i.MX53
> -
> -   * Freescale i.MX53 SABRE Automotive board (imx53ard)
> -   * Freescale i.MX53 Quick Start Board (imx53qsb)
> -
> - * i.MX6
> -
> -   * Freescale i.MX6SL EVK (imx6slevk)
> -   * Freescale i.MX6DL SABRE SD (imx6dlsabresd)
> -   * Freescale i.MX6Q SABRE Smart Device (imx6qsabresd)
> -   * Boundary Devices i.MX6Q SABRE Lite (imx6qsabrelite)
> -   * Boundary Devices Nitrogen6X (nitrogen6x)
> -   * Wandboard.org Wandboard Solo (wandboard-solo)
> -   * Wandboard.org Wandboard Dual (wandboard-dual)
> -   * Congatec Conga-QEVAl Evaluation Carrier Board (cgtqmx6)
> +   http://freescale.github.io/doc/release-notes/current/
>  
>  Quick Start Guide
>  -----------------


-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com