Re: Yocto image on Freescale iMx6 Sabre SDP

[Daiane Angolini <daiane.angolini@freescale.com>]

On 10/29/2013 08:24 AM, Daiane Angolini wrote:
> On 10/29/2013 04:51 AM, Krishna wrote:
>> Hi,
>>
>> Freescale SabreSDP board is working fine with images provided in
>> L3.0.35_4.1.0_DEMO_IMAGE_BSP.
>> But I want to boot it with Yocto provided fsl-image-gui & want to add
>> IVI layer to the image.
>
> I'm sorry to ask it again, but I don't remember the answer.
>
> Do you know the chip tapeout of your board?
>
> I heard the bsp kernel 4.1.0 was not tested (and may not support) TO1.0
>
> And I know there is an old board revision that must be reworked (remove
> u12) in order to get kernel up. The component u12 is near USB connector,
> on top of board.
>
> Would it be your case?

 > It's all right. My board is SCH-27392 REV C3 700-27392 REV B. Is it
 > tape-out?
 > Excuse me, but I not understand what is "u12". Is it 12-pins plug?


Please, try to not reply on digest email. :(


u12 is the name of a component on your board, you can see "u12" wronte 
at side of a small black square :D (for me everything is small black 
square but when it's a circle)


the TO you can figure out from your u-boot log.


Daiane

>
>>
>>
>>
>> -----Original Message----- From: Муравьев Александр Борисович
>> Sent: Tuesday, October 29, 2013 11:42 AM
>> To: meta-freescale@yoctoproject.org
>> Subject: [meta-freescale] Yocto image on Freescale iMx6 Sabre SDP
>>
>> 28.10.2013 15:22, meta-freescale-request@yoctoproject.org пишет:
>>> is current available fsl-image-gui image will not work for SabreSD-SDP
>>> board?
>> Hello.
>> I have same board. And i am using next soft.
>> I use bootloader and kernel from L3.0.35_4.1.0_DEMO_IMAGE_BSP. This
>> package is avaliable on official web page
>> (http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=RDIMX6SABREPLAT&fpsp=1&tab=Design_Tools_Tab).
>>
>>
>> Filesystem from package L3.0.35_4.1.0_UBUNTU_RFS_BSP. It is also
>> available on official page.
>> To write it i use Mfgtool. I get it from package
>> IMX6_R13.41_ANDROID_SOURCE_CODE.
>>
>> Hope it help.
>> Regards.
>> _______________________________________________
>> meta-freescale mailing list
>> meta-freescale@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-freescale
>> _______________________________________________
>> meta-freescale mailing list
>> meta-freescale@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-freescale
>
>


-- 
Daiane