All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH 2/2] ARM: shmobile: r8a7779: cleanup registration of sh_eth
Date: Fri, 01 Nov 2013 12:24:29 +0000	[thread overview]
Message-ID: <52739D7D.40409@cogentembedded.com> (raw)
In-Reply-To: <874n7xylzz.wl%kuninori.morimoto.gx@renesas.com>

Hello.

On 01-11-2013 5:00, Kuninori Morimoto wrote:

> sh_eth driver which needs platform data at the time of
> registration is not used.
> Now, ARM/shmobile aims to support DT,
> and the C code base board support will be removed
> if DT support is completed.
> Current driver registration method which needs platform data
> and which is not shared complicates codes.
> This means legacy C code cleanup after DT supporting
> will be more complicated
> This patch registers it on board code as cleanup C code

    What? Where are you doing that?

> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
>   arch/arm/mach-shmobile/include/mach/r8a7779.h |    2 --
>   arch/arm/mach-shmobile/setup-r8a7779.c        |   20 --------------------
>   2 files changed, 22 deletions(-)

> diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
> index 1cab247..5014145 100644
> --- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
> +++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
> @@ -3,7 +3,6 @@
>
>   #include <linux/sh_clk.h>
>   #include <linux/pm_domain.h>
> -#include <linux/sh_eth.h>
>
>   /* HPB-DMA slave IDs */
>   enum {
> @@ -39,7 +38,6 @@ extern void r8a7779_earlytimer_init(void);
>   extern void r8a7779_add_early_devices(void);
>   extern void r8a7779_add_standard_devices(void);
>   extern void r8a7779_add_standard_devices_dt(void);
> -extern void r8a7779_add_ether_device(struct sh_eth_plat_data *pdata);
>   extern void r8a7779_init_late(void);
>   extern void r8a7779_clock_init(void);
>   extern void r8a7779_pinmux_init(void);
> diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
> index 51a43c5..8f94531 100644
> --- a/arch/arm/mach-shmobile/setup-r8a7779.c
> +++ b/arch/arm/mach-shmobile/setup-r8a7779.c
> @@ -598,18 +598,6 @@ static struct platform_device ohci1_device = {
>   	.resource	= ohci1_resources,
>   };
>
> -/* Ether */
> -static struct resource ether_resources[] __initdata = {
> -	{
> -		.start	= 0xfde00000,
> -		.end	= 0xfde003ff,
> -		.flags	= IORESOURCE_MEM,
> -	}, {
> -		.start	= gic_iid(0xb4),
> -		.flags	= IORESOURCE_IRQ,
> -	},
> -};
> -
>   /* HPB-DMA */
>
>   /* Asynchronous mode register bits */
> @@ -798,14 +786,6 @@ void __init r8a7779_add_standard_devices(void)
>   	r8a7779_register_hpb_dmae();
>   }
>
> -void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata)
> -{
> -	platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
> -					  ether_resources,
> -					  ARRAY_SIZE(ether_resources),
> -					  pdata, sizeof(*pdata));
> -}
> -
>   /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
>   void __init __weak r8a7779_register_twd(void) { }

WBR, Sergei


      reply	other threads:[~2013-11-01 12:24 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-01  1:00 [PATCH 2/2] ARM: shmobile: r8a7779: cleanup registration of sh_eth Kuninori Morimoto
2013-11-01 12:24 ` Sergei Shtylyov [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52739D7D.40409@cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.