[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to e1000, igb, ixgbe and ixgbevf.

Hong Zhiguo provides a fix for e1000 where tx_ring and adapter->tx_ring
are already of type "struct e1000_tx_ring" so no need to divide by
e1000_tx_ring size in the idx calculation.

Emil provides a fix for ixgbevf to remove a redundant workaround related
to header split and a fix for ixgbe to resolve an issue where the MTA table
can be cleared when the interface is reset while in promisc mode.

Todd provides a fix for igb to prevent ethtool from writing to the iNVM
in i210/i211 devices.  This issue was reported by Marek Vasut <marex@denx.de>.

Anton Blanchard provides a fix for ixgbe to reduce memory consumption
with larger page sizes, seen on PPC.

Don provides a cleanup in ixgbe to replace the IXGBE_DESC_UNUSED macro with
the inline function ixgbevf_desc_unused() to make the logic a bit more
readable.

The following are changes since commit ba4865027c11d7ac8e5a33e0624dd415caab2027:
  ipv6: remove the unnecessary statement in find_match()
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Anton Blanchard (1):
  ixgbe: Reduce memory consumption with larger page sizes

Don Skidmore (1):
  ixgbe: cleanup IXGBE_DESC_UNUSED

Emil Tantilov (2):
  ixgbevf: remove redundant workaround
  ixgbe: fix inconsistent clearing of the multicast table

Fujinaka, Todd (1):
  igb: Don't let ethtool try to write to iNVM in i210/i211

Hong Zhiguo (1):
  e1000: fix wrong queue idx calculation

 drivers/net/ethernet/intel/e1000/e1000_main.c     |  3 +--
 drivers/net/ethernet/intel/igb/igb_ethtool.c      |  4 +++-
 drivers/net/ethernet/intel/ixgbe/ixgbe.h          |  4 ++++
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c     | 15 +++++++--------
 drivers/net/ethernet/intel/ixgbevf/ixgbevf.h      | 10 +++++++---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 19 +++++--------------
 6 files changed, 27 insertions(+), 28 deletions(-)

-- 
1.8.3.1

[net-next 1/6] e1000: fix wrong queue idx calculation

[Jeff Kirsher]

From: Hong Zhiguo <zhiguohong@tencent.com>

tx_ring and adapter->tx_ring are already of type "struct
e1000_tx_ring *"

Signed-off-by: Hong Zhiguo <zhiguohong@tencent.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000/e1000_main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 59ad007..ad6800a 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -3917,8 +3917,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 			      "  next_to_watch        <%x>\n"
 			      "  jiffies              <%lx>\n"
 			      "  next_to_watch.status <%x>\n",
-				(unsigned long)((tx_ring - adapter->tx_ring) /
-					sizeof(struct e1000_tx_ring)),
+				(unsigned long)(tx_ring - adapter->tx_ring),
 				readl(hw->hw_addr + tx_ring->tdh),
 				readl(hw->hw_addr + tx_ring->tdt),
 				tx_ring->next_to_use,
-- 
1.8.3.1

[net-next 2/6] ixgbevf: remove redundant workaround

[Jeff Kirsher]

From: Emil Tantilov <emil.s.tantilov@intel.com>

This patch removes a workaround related to header split, which is redundant
because the driver does not support splitting packet headers on Rx.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index b16b694..9685354 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -497,15 +497,6 @@ static int ixgbevf_clean_rx_irq(struct ixgbevf_q_vector *q_vector,
 		total_rx_bytes += skb->len;
 		total_rx_packets++;
 
-		/*
-		 * Work around issue of some types of VM to VM loop back
-		 * packets not getting split correctly
-		 */
-		if (staterr & IXGBE_RXD_STAT_LB) {
-			u32 header_fixup_len = skb_headlen(skb);
-			if (header_fixup_len < 14)
-				skb_push(skb, header_fixup_len);
-		}
 		skb->protocol = eth_type_trans(skb, rx_ring->netdev);
 
 		/* Workaround hardware that can't do proper VEPA multicast
-- 
1.8.3.1

[net-next 3/6] igb: Don't let ethtool try to write to iNVM in i210/i211

[Jeff Kirsher]

From: "Fujinaka, Todd" <todd.fujinaka@intel.com>

Don't let ethtool try to write to iNVM in i210/i211.

This fixes an issue seen by Marek Vasut.

Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_ethtool.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index 0ae3177..b918ba3 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -771,8 +771,10 @@ static int igb_set_eeprom(struct net_device *netdev,
 	if (eeprom->len == 0)
 		return -EOPNOTSUPP;
 
-	if (hw->mac.type == e1000_i211)
+	if ((hw->mac.type >= e1000_i210) &&
+	    !igb_get_flash_presence_i210(hw)) {
 		return -EOPNOTSUPP;
+	}
 
 	if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
 		return -EFAULT;
-- 
1.8.3.1

Re: [net-next 3/6] igb: Don't let ethtool try to write to iNVM in i210/i211

[Sergei Shtylyov]

Hello.

On 01-11-2013 17:56, Jeff Kirsher wrote:

> From: "Fujinaka, Todd" <todd.fujinaka@intel.com>

> Don't let ethtool try to write to iNVM in i210/i211.

> This fixes an issue seen by Marek Vasut.

> Reported-by: Marek Vasut <marex@denx.de>
> Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> ---
>   drivers/net/ethernet/intel/igb/igb_ethtool.c | 4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)

> diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
> index 0ae3177..b918ba3 100644
> --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
> +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
> @@ -771,8 +771,10 @@ static int igb_set_eeprom(struct net_device *netdev,
>   	if (eeprom->len == 0)
>   		return -EOPNOTSUPP;
>
> -	if (hw->mac.type == e1000_i211)
> +	if ((hw->mac.type >= e1000_i210) &&
> +	    !igb_get_flash_presence_i210(hw)) {
>   		return -EOPNOTSUPP;
> +	}

    Why have you added {}?

WBR, Sergei

[net-next 4/6] ixgbe: Reduce memory consumption with larger page sizes

[Jeff Kirsher]

From: Anton Blanchard <anton@samba.org>

The ixgbe driver allocates pages for its receive rings. It currently
uses 512 pages, regardless of page size. During receive handling it
adds the unused part of the page back into the rx ring, avoiding the
need for a new allocation.

On a ppc64 box with 64 threads and 64kB pages, we end up with
512 entries * 64 rx queues * 64kB = 2GB memory used. Even more of a
concern is that we use up 2GB of IOMMU space in order to map all this
memory.

The driver makes a number of decisions based on if PAGE_SIZE is less
than 8kB, so use this as the breakpoint and only allocate 128 entries
on 8kB or larger page sizes.

Signed-off-by: Anton Blanchard <anton@samba.org>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index f51fd1f..0914914 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -67,7 +67,11 @@
 #define IXGBE_MAX_TXD			   4096
 #define IXGBE_MIN_TXD			     64
 
+#if (PAGE_SIZE < 8192)
 #define IXGBE_DEFAULT_RXD		    512
+#else
+#define IXGBE_DEFAULT_RXD		    128
+#endif
 #define IXGBE_MAX_RXD			   4096
 #define IXGBE_MIN_RXD			     64
 
-- 
1.8.3.1

[net-next 5/6] ixgbe: cleanup IXGBE_DESC_UNUSED

[Jeff Kirsher]

From: Don Skidmore <donald.c.skidmore@intel.com>

This patch just replaces the IXGBE_DESC_UNUSED macro with a like named
inline function ixgbevf_desc_unused. The inline function makes the logic
a bit more readable.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf.h      | 10 +++++++---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 10 +++++-----
 2 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
index acf3806..8971e2d 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
@@ -286,9 +286,13 @@ static inline bool ixgbevf_qv_disable(struct ixgbevf_q_vector *q_vector)
 	((_eitr) ? (1000000000 / ((_eitr) * 256)) : 8)
 #define EITR_REG_TO_INTS_PER_SEC EITR_INTS_PER_SEC_TO_REG
 
-#define IXGBE_DESC_UNUSED(R) \
-	((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
-	(R)->next_to_clean - (R)->next_to_use - 1)
+static inline u16 ixgbevf_desc_unused(struct ixgbevf_ring *ring)
+{
+	u16 ntc = ring->next_to_clean;
+	u16 ntu = ring->next_to_use;
+
+	return ((ntc > ntu) ? 0 : ring->count) + ntc - ntu - 1;
+}
 
 #define IXGBEVF_RX_DESC(R, i)	    \
 	(&(((union ixgbe_adv_rx_desc *)((R)->desc))[i]))
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 9685354..038bfc8 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -251,7 +251,7 @@ static bool ixgbevf_clean_tx_irq(struct ixgbevf_q_vector *q_vector,
 
 #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
 	if (unlikely(count && netif_carrier_ok(tx_ring->netdev) &&
-		     (IXGBE_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))) {
+		     (ixgbevf_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD))) {
 		/* Make sure that anybody stopping the queue after this
 		 * sees the new next_to_clean.
 		 */
@@ -529,7 +529,7 @@ next_desc:
 	}
 
 	rx_ring->next_to_clean = i;
-	cleaned_count = IXGBE_DESC_UNUSED(rx_ring);
+	cleaned_count = ixgbevf_desc_unused(rx_ring);
 
 	if (cleaned_count)
 		ixgbevf_alloc_rx_buffers(adapter, rx_ring, cleaned_count);
@@ -1380,7 +1380,7 @@ static void ixgbevf_configure(struct ixgbevf_adapter *adapter)
 	for (i = 0; i < adapter->num_rx_queues; i++) {
 		struct ixgbevf_ring *ring = &adapter->rx_ring[i];
 		ixgbevf_alloc_rx_buffers(adapter, ring,
-					 IXGBE_DESC_UNUSED(ring));
+					 ixgbevf_desc_unused(ring));
 	}
 }
 
@@ -3102,7 +3102,7 @@ static int __ixgbevf_maybe_stop_tx(struct ixgbevf_ring *tx_ring, int size)
 
 	/* We need to check again in a case another CPU has just
 	 * made room available. */
-	if (likely(IXGBE_DESC_UNUSED(tx_ring) < size))
+	if (likely(ixgbevf_desc_unused(tx_ring) < size))
 		return -EBUSY;
 
 	/* A reprieve! - use start_queue because it doesn't call schedule */
@@ -3113,7 +3113,7 @@ static int __ixgbevf_maybe_stop_tx(struct ixgbevf_ring *tx_ring, int size)
 
 static int ixgbevf_maybe_stop_tx(struct ixgbevf_ring *tx_ring, int size)
 {
-	if (likely(IXGBE_DESC_UNUSED(tx_ring) >= size))
+	if (likely(ixgbevf_desc_unused(tx_ring) >= size))
 		return 0;
 	return __ixgbevf_maybe_stop_tx(tx_ring, size);
 }
-- 
1.8.3.1

[net-next 6/6] ixgbe: fix inconsistent clearing of the multicast table

[Jeff Kirsher]

From: Emil Tantilov <emil.s.tantilov@intel.com>

This patch resolves an issue where the MTA table can be cleared when the
interface is reset while in promisc mode. As result IPv6 traffic between
VFs will be interrupted.

This patch makes the update of the MTA table unconditional to avoid the
inconsistent clearing on reset.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index a7d1a1c..5191b3c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -3823,14 +3823,6 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
 		if (netdev->flags & IFF_ALLMULTI) {
 			fctrl |= IXGBE_FCTRL_MPE;
 			vmolr |= IXGBE_VMOLR_MPE;
-		} else {
-			/*
-			 * Write addresses to the MTA, if the attempt fails
-			 * then we should just turn on promiscuous mode so
-			 * that we can at least receive multicast traffic
-			 */
-			hw->mac.ops.update_mc_addr_list(hw, netdev);
-			vmolr |= IXGBE_VMOLR_ROMPE;
 		}
 		ixgbe_vlan_filter_enable(adapter);
 		hw->addr_ctrl.user_set_promisc = false;
@@ -3847,6 +3839,13 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
 		vmolr |= IXGBE_VMOLR_ROPE;
 	}
 
+	/* Write addresses to the MTA, if the attempt fails
+	 * then we should just turn on promiscuous mode so
+	 * that we can at least receive multicast traffic
+	 */
+	hw->mac.ops.update_mc_addr_list(hw, netdev);
+	vmolr |= IXGBE_VMOLR_ROMPE;
+
 	if (adapter->num_vfs)
 		ixgbe_restore_vf_multicasts(adapter);
 
-- 
1.8.3.1

Re: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Fri,  1 Nov 2013 06:56:44 -0700

> This series contains updates to e1000, igb, ixgbe and ixgbevf.
> 
> Hong Zhiguo provides a fix for e1000 where tx_ring and adapter->tx_ring
> are already of type "struct e1000_tx_ring" so no need to divide by
> e1000_tx_ring size in the idx calculation.
> 
> Emil provides a fix for ixgbevf to remove a redundant workaround related
> to header split and a fix for ixgbe to resolve an issue where the MTA table
> can be cleared when the interface is reset while in promisc mode.
> 
> Todd provides a fix for igb to prevent ethtool from writing to the iNVM
> in i210/i211 devices.  This issue was reported by Marek Vasut <marex@denx.de>.
> 
> Anton Blanchard provides a fix for ixgbe to reduce memory consumption
> with larger page sizes, seen on PPC.
> 
> Don provides a cleanup in ixgbe to replace the IXGBE_DESC_UNUSED macro with
> the inline function ixgbevf_desc_unused() to make the logic a bit more
> readable.

Pulled, thanks a lot Jeff.