From: CrazyCat <crazycat69@narod.ru>
To: linux-media@vger.kernel.org
Subject: [PATCH] dw2102: Geniatech T220 support
Date: Fri, 01 Nov 2013 21:33:27 +0200 [thread overview]
Message-ID: <52740207.3080105@narod.ru> (raw)
Support for Geniatech T220 DVB-T/T2/C USB stick.
Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net>
diff --git a/drivers/media/usb/dvb-usb/dw2102.c
b/drivers/media/usb/dvb-usb/dw2102.c
index 6136a2c..12e00aa 100644
--- a/drivers/media/usb/dvb-usb/dw2102.c
+++ b/drivers/media/usb/dvb-usb/dw2102.c
@@ -2,7 +2,7 @@
* DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101,
* TeVii S600, S630, S650, S660, S480, S421, S632
* Prof 1100, 7500,
- * Geniatech SU3000 Cards
+ * Geniatech SU3000, T220 Cards
* Copyright (C) 2008-2012 Igor M. Liplianin (liplianin@me.by)
*
* This program is free software; you can redistribute it and/or
modify it
@@ -29,6 +29,8 @@
#include "stb6100.h"
#include "stb6100_proc.h"
#include "m88rs2000.h"
+#include "tda18271.h"
+#include "cxd2820r.h"
#ifndef USB_PID_DW2102
#define USB_PID_DW2102 0x2102
@@ -1025,6 +1027,16 @@ static struct ds3000_config su3000_ds3000_config = {
.set_lock_led = dw210x_led_ctrl,
};
+static struct cxd2820r_config cxd2820r_config = {
+ .i2c_address = 0x6c, /* (0xd8 >> 1) */
+ .ts_mode = 0x38,
+};
+
+static struct tda18271_config tda18271_config = {
+ .output_opt = TDA18271_OUTPUT_LT_OFF,
+ .gate = TDA18271_GATE_DIGITAL,
+};
+
static u8 m88rs2000_inittab[] = {
DEMOD_WRITE, 0x9a, 0x30,
DEMOD_WRITE, 0x00, 0x01,
@@ -1294,6 +1306,49 @@ static int su3000_frontend_attach(struct
dvb_usb_adapter *d)
return -EIO;
}
+static int t220_frontend_attach(struct dvb_usb_adapter *d)
+{
+ u8 obuf[3] = { 0xe, 0x80, 0 };
+ u8 ibuf[] = { 0 };
+
+ if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+ err("command 0x0e transfer failed.");
+
+ obuf[0] = 0xe;
+ obuf[1] = 0x83;
+ obuf[2] = 0;
+
+ if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+ err("command 0x0e transfer failed.");
+
+ msleep(100);
+
+ obuf[0] = 0xe;
+ obuf[1] = 0x80;
+ obuf[2] = 1;
+
+ if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+ err("command 0x0e transfer failed.");
+
+ obuf[0] = 0x51;
+
+ if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0)
+ err("command 0x51 transfer failed.");
+
+ d->fe_adap[0].fe = dvb_attach(cxd2820r_attach, &cxd2820r_config,
+ &d->dev->i2c_adap, NULL);
+ if (d->fe_adap[0].fe != NULL) {
+ if (dvb_attach(tda18271_attach, d->fe_adap[0].fe, 0x60,
+ &d->dev->i2c_adap, &tda18271_config)) {
+ info("Attached TDA18271HD/CXD2820R!\n");
+ return 0;
+ }
+ }
+
+ info("Failed to attach TDA18271HD/CXD2820R!\n");
+ return -EIO;
+}
+
static int m88rs2000_frontend_attach(struct dvb_usb_adapter *d)
{
u8 obuf[] = { 0x51 };
@@ -1560,6 +1615,7 @@ enum dw2102_table_entry {
TEVII_S632,
TERRATEC_CINERGY_S2_R2,
GOTVIEW_SAT_HD,
+ GENIATECH_T220,
};
static struct usb_device_id dw2102_table[] = {
@@ -1582,6 +1638,7 @@ static struct usb_device_id dw2102_table[] = {
[TEVII_S632] = {USB_DEVICE(0x9022, USB_PID_TEVII_S632)},
[TERRATEC_CINERGY_S2_R2] = {USB_DEVICE(USB_VID_TERRATEC, 0x00b0)},
[GOTVIEW_SAT_HD] = {USB_DEVICE(0x1FE1, USB_PID_GOTVIEW_SAT_HD)},
+ [GENIATECH_T220] = {USB_DEVICE(0x1f4d, 0xD220)},
{ }
};
@@ -2007,6 +2064,54 @@ static struct dvb_usb_device_properties
su3000_properties = {
}
};
+static struct dvb_usb_device_properties t220_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .size_of_priv = sizeof(struct su3000_state),
+ .power_ctrl = su3000_power_ctrl,
+ .num_adapters = 1,
+ .identify_state = su3000_identify_state,
+ .i2c_algo = &su3000_i2c_algo,
+
+ .rc.legacy = {
+ .rc_map_table = rc_map_su3000_table,
+ .rc_map_size = ARRAY_SIZE(rc_map_su3000_table),
+ .rc_interval = 150,
+ .rc_query = dw2102_rc_query,
+ },
+
+ .read_mac_address = su3000_read_mac_address,
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+
+ .adapter = {
+ {
+ .num_frontends = 1,
+ .fe = { {
+ .streaming_ctrl = su3000_streaming_ctrl,
+ .frontend_attach = t220_frontend_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ }
+ } },
+ }
+ },
+ .num_device_descs = 1,
+ .devices = {
+ { "Geniatech T220 DVB-T/T2 USB2.0",
+ { &dw2102_table[GENIATECH_T220], NULL },
+ { NULL },
+ },
+ }
+};
+
static int dw2102_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
@@ -2079,7 +2184,9 @@ static int dw2102_probe(struct usb_interface *intf,
0 == dvb_usb_device_init(intf, s421,
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &su3000_properties,
- THIS_MODULE, NULL, adapter_nr))
+ THIS_MODULE, NULL, adapter_nr) ||
+ 0 == dvb_usb_device_init(intf, &t220_properties,
+ THIS_MODULE, NULL, adapter_nr))
return 0;
return -ENODEV;
@@ -2099,7 +2206,7 @@ MODULE_DESCRIPTION("Driver for DVBWorld DVB-S
2101, 2102, DVB-S2 2104,"
" DVB-C 3101 USB2.0,"
" TeVii S600, S630, S650, S660, S480, S421, S632"
" Prof 1100, 7500 USB2.0,"
- " Geniatech SU3000 devices");
+ " Geniatech SU3000, T220 devices");
MODULE_VERSION("0.1");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE(DW2101_FIRMWARE);
next reply other threads:[~2013-11-01 19:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-01 19:33 CrazyCat [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-11-02 21:03 [PATCH] dw2102: Geniatech T220 support CrazyCat
2013-11-03 11:39 ` Mauro Carvalho Chehab
2013-11-03 20:52 ` CrazyCat
2013-11-13 23:53 CrazyCat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52740207.3080105@narod.ru \
--to=crazycat69@narod.ru \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.