From: butmonkeh@gmail.com
To: jikos@kernel.org, bentiss@kernel.org,
Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Cc: Mario.Limonciello@amd.com, linux-input@vger.kernel.org,
Basavaraj Natikar <Basavaraj.Natikar@amd.com>,
Eric Naim <dnaim@cachyos.org>,
Akshata MukundShetty <akshata.mukundshetty@amd.com>
Subject: Re: [PATCH v2] HID: amd_sfh: Enable operating mode
Date: Thu, 07 Aug 2025 13:42:56 +0100 [thread overview]
Message-ID: <5275875.OV4Wx5bFTl@fedora> (raw)
In-Reply-To: <20250623085453.2267034-1-Basavaraj.Natikar@amd.com>
On Monday, 23 June 2025 09:54:53 British Summer Time Basavaraj Natikar wrote:
> Add changes to enable operating modes in the driver to allow the FW to
> activate and retrieve data from relevant sensors. This enables the FW to
> take necessary actions based on the operating modes.
>
> Tested-by: Eric Naim <dnaim@cachyos.org>
> Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
> Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
> ---
> v2:
> * Increased missing device count.
> ---
> drivers/hid/amd-sfh-hid/amd_sfh_client.c | 23 +++++++++++++++++++++++
> drivers/hid/amd-sfh-hid/amd_sfh_hid.h | 2 +-
> drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 4 ++++
> drivers/hid/amd-sfh-hid/amd_sfh_pcie.h | 1 +
> 4 files changed, 29 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_client.c
> b/drivers/hid/amd-sfh-hid/amd_sfh_client.c index 3438d392920f..0f2cbae39b2b
> 100644
> --- a/drivers/hid/amd-sfh-hid/amd_sfh_client.c
> +++ b/drivers/hid/amd-sfh-hid/amd_sfh_client.c
> @@ -146,6 +146,8 @@ static const char *get_sensor_name(int idx)
> return "gyroscope";
> case mag_idx:
> return "magnetometer";
> + case op_idx:
> + return "operating-mode";
> case als_idx:
> case ACS_IDX: /* ambient color sensor */
> return "ALS";
> @@ -243,6 +245,20 @@ int amd_sfh_hid_client_init(struct amd_mp2_dev
> *privdata) rc = -ENOMEM;
> goto cleanup;
> }
> +
> + if (cl_data->sensor_idx[i] == op_idx) {
> + info.period = AMD_SFH_IDLE_LOOP;
> + info.sensor_idx = cl_data->sensor_idx[i];
> + info.dma_address = cl_data->sensor_dma_addr[i];
> + mp2_ops->start(privdata, info);
> + cl_data->sensor_sts[i] =
amd_sfh_wait_for_response(privdata,
> +
cl_data->sensor_idx[i],
> +
SENSOR_ENABLED);
> + if (cl_data->sensor_sts[i] == SENSOR_ENABLED)
> + cl_data->is_any_sensor_enabled = true;
> + continue;
> + }
> +
> cl_data->sensor_sts[i] = SENSOR_DISABLED;
> cl_data->sensor_requested_cnt[i] = 0;
> cl_data->cur_hid_dev = i;
> @@ -303,6 +319,13 @@ int amd_sfh_hid_client_init(struct amd_mp2_dev
> *privdata)
>
> for (i = 0; i < cl_data->num_hid_devices; i++) {
> cl_data->cur_hid_dev = i;
> + if (cl_data->sensor_idx[i] == op_idx) {
> + dev_dbg(dev, "sid 0x%x (%s) status 0x%x\n",
> + cl_data->sensor_idx[i],
get_sensor_name(cl_data->sensor_idx[i]),
> + cl_data->sensor_sts[i]);
> + continue;
> + }
> +
> if (cl_data->sensor_sts[i] == SENSOR_ENABLED) {
> rc = amdtp_hid_probe(i, cl_data);
> if (rc)
> diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_hid.h
> b/drivers/hid/amd-sfh-hid/amd_sfh_hid.h index 1c91be8daedd..7452b0302953
> 100644
> --- a/drivers/hid/amd-sfh-hid/amd_sfh_hid.h
> +++ b/drivers/hid/amd-sfh-hid/amd_sfh_hid.h
> @@ -11,7 +11,7 @@
> #ifndef AMDSFH_HID_H
> #define AMDSFH_HID_H
>
> -#define MAX_HID_DEVICES 6
> +#define MAX_HID_DEVICES 7
> #define AMD_SFH_HID_VENDOR 0x1022
> #define AMD_SFH_HID_PRODUCT 0x0001
>
> diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
> b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c index 1c1fd63330c9..2983af969579
> 100644
> --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
> +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
> @@ -29,6 +29,7 @@
> #define ACEL_EN BIT(0)
> #define GYRO_EN BIT(1)
> #define MAGNO_EN BIT(2)
> +#define OP_EN BIT(15)
> #define HPD_EN BIT(16)
> #define ALS_EN BIT(19)
> #define ACS_EN BIT(22)
> @@ -232,6 +233,9 @@ int amd_mp2_get_sensor_num(struct amd_mp2_dev *privdata,
> u8 *sensor_id) if (MAGNO_EN & activestatus)
> sensor_id[num_of_sensors++] = mag_idx;
>
> + if (OP_EN & activestatus)
> + sensor_id[num_of_sensors++] = op_idx;
> +
> if (ALS_EN & activestatus)
> sensor_id[num_of_sensors++] = als_idx;
>
> diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h
> b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h index 05e400a4a83e..2eb61f4e8434
> 100644
> --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h
> +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h
> @@ -79,6 +79,7 @@ enum sensor_idx {
> accel_idx = 0,
> gyro_idx = 1,
> mag_idx = 2,
> + op_idx = 15,
> als_idx = 19
> };
Tested-by: Marc H (butmonkeh@gmail.com) Asus ROG Flow X13 (GV301) - working
prev parent reply other threads:[~2025-08-07 12:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-23 8:54 [PATCH v2] HID: amd_sfh: Enable operating mode Basavaraj Natikar
2025-06-23 14:59 ` Limonciello, Mario
2025-07-03 7:36 ` Jiri Kosina
2025-08-07 12:42 ` butmonkeh [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5275875.OV4Wx5bFTl@fedora \
--to=butmonkeh@gmail.com \
--cc=Basavaraj.Natikar@amd.com \
--cc=Mario.Limonciello@amd.com \
--cc=akshata.mukundshetty@amd.com \
--cc=bentiss@kernel.org \
--cc=dnaim@cachyos.org \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.