From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework
Date: Mon, 4 Nov 2013 08:39:29 -0500 [thread overview]
Message-ID: <5277A391.4090904@ti.com> (raw)
In-Reply-To: <52774523.1080909@denx.de>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 11/04/2013 01:56 AM, Heiko Schocher wrote:
> Hello Tom,
>
> Am 29.10.2013 12:30, schrieb Heiko Schocher:
>> Hello Igor,
>>
>> Am 29.10.2013 12:07, schrieb Igor Grinberg:
>>> On 10/28/13 08:19, Heiko Schocher wrote:
>>>> Hello Igor,
>>>>
>>>> Am 27.10.2013 08:30, schrieb Igor Grinberg:
>>>>> Hi Heiko,
>>>>>
>>>>> On 10/22/13 11:03, Heiko Schocher wrote:
>>>>>> - add omap24xx driver to new multibus/multiadpater
>>>>>> support - adapted all config files, which uses this
>>>>>> driver
>>>>>>
>>>>>> Tested on the am335x based siemens boards rut, dxr2 and
>>>>>> pxm2 posted here:
>>>>>> http://patchwork.ozlabs.org/patch/263211/
>>>>>>
>>>>>> Signed-off-by: Heiko Schocher<hs@denx.de> Tested-by: Tom
>>>>>> Rini<trini@ti.com> Cc: Lars
>>>>>> Poeschel<poeschel@lemonage.de> Cc: Steve
>>>>>> Sakoman<sakoman@gmail.com> Cc: Thomas
>>>>>> Weber<weber@corscience.de> Cc: Tom
>>>>>> Rix<Tom.Rix@windriver.com> Cc: Grazvydas
>>>>>> Ignotas<notasas@gmail.com> Cc: Enric Balletbo i
>>>>>> Serra<eballetbo@iseebcn.com> Cc: Luca
>>>>>> Ceresoli<luca.ceresoli@comelit.it> Cc: Igor
>>>>>> Grinberg<grinberg@compulab.co.il> Cc: Ilya
>>>>>> Yanok<yanok@emcraft.com> Cc: Stefano
>>>>>> Babic<sbabic@denx.de> Cc: Nishanth Menon<nm@ti.com> Cc:
>>>>>> Pali Roh?r<pali.rohar@gmail.com> Cc: Peter
>>>>>> Barada<peter.barada@logicpd.com> Cc: Nagendra T
>>>>>> S<nagendra@mistralsolutions.com> Cc: Michael
>>>>>> Jones<michael.jones@matrix-vision.de> Cc: Raphael
>>>>>> Assenat<raph@8d.com>
>>>>>
>>>>> [...]
>>>> [...]
>>>>
>>>>>> diff --git a/board/compulab/cm_t35/eeprom.h
>>>>>> b/board/compulab/cm_t35/eeprom.h index 02ffbb1..a07559d
>>>>>> 100644 --- a/board/compulab/cm_t35/eeprom.h +++
>>>>>> b/board/compulab/cm_t35/eeprom.h @@ -10,7 +10,7 @@
>>>>>> #ifndef _EEPROM_ #define _EEPROM_
>>>>>>
>>>>>> -#ifdef CONFIG_DRIVER_OMAP34XX_I2C +#ifdef
>>>>>> CONFIG_SYS_I2C_OMAP34XX int
>>>>>> cm_t3x_eeprom_read_mac_addr(uchar *buf); u32
>>>>>> cm_t3x_eeprom_get_board_rev(void); #else
>>>>>
>>>>> Please, rebase on top of:
>>>>> http://patchwork.ozlabs.org/patch/275284/ which should be
>>>>> applied any time soon.
>>>>>
>>>>> Otherwise, Acked-by: Igor
>>>>> Grinberg<grinberg@compulab.co.il>
>>>>
>>>> Hmm.. I cannot see, that your patch is accepted ... but I
>>>> looked in it, and it looks good to me. So, I propose to add
>>>> this patch to the i2c tree, so I do the necessary changes in
>>>> my patch when applying it to the i2c tree (as they are
>>>> trivial changes) ...
>>>
>>> Well, I have no problem with that, but we need to take into
>>> account that there are several more patches (unrelated to i2c)
>>> on the mailing list waiting for approval/apply and depend on my
>>> series.
>>
>> Ok.
>>
>>>> @Tom: Is this OK for you?
>>>
>>> I think, it would be better to apply my series to u-boot-ti and
>>> you can pull from it to the i2c tree?
>>
>> Hmm.. u-boot-i2c is based on u-boot.git not on u-boot-ti, and I
>> did not want to change this. I can of course rebase my patch
>> against u-boot-ti when Tom added your patch to u-boot-ti and
>> resend it, and tom pick up my patch ...
>
> Tom, what do you think?
You should keep your tree based on u-boot/master. I actually grabbed
Igor's patches Friday for u-boot-ti but didn't get a chance to send
out replies to everything I picked up before packing it up for the
weekend.
- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/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=96H9
-----END PGP SIGNATURE-----
next prev parent reply other threads:[~2013-11-04 13:39 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-22 9:03 [U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework Heiko Schocher
2013-10-27 7:30 ` Igor Grinberg
2013-10-28 6:19 ` Heiko Schocher
2013-10-29 11:07 ` Igor Grinberg
2013-10-29 11:30 ` Heiko Schocher
2013-11-04 6:56 ` Heiko Schocher
2013-11-04 13:39 ` Tom Rini [this message]
2013-10-28 9:07 ` Stefano Babic
2013-11-13 6:33 ` [U-Boot] [U-Boot, " Heiko Schocher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5277A391.4090904@ti.com \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.