Re: kernel config required for rt-kernel

[Bruce Ashfield <bruce.ashfield@windriver.com>]

On 13-11-04 9:45 PM, Amit Kumar wrote:
> Hi,
>
>             I need help to build a rt-kernel. Is anyone knows about the
> real-time kernel configurations? How can I build a real-time kernel?
>
> What all are the kernel configuration need to be enable for rt-kernel?

If you use the linux-yocto-rt recipe, you'll always get a baseline set
of known good -rt config values.

Adding your BSPs config values on top of that baseline is all that is
required to get started working with the integrated -rt kernel. (you
of course also need to make sure that typical kernel recipe elements
are done, like making your board compatible with the recipe and setting
an appropriate KBRANCH).

Cheers,

Bruce

>
> Thanks & Regards
>
> Amit K
>
>
> ------------------------------------------------------------------------
> The contents of this e-mail and any attachment(s) may contain
> confidential or privileged information for the intended recipient(s).
> Unintended recipients are prohibited from taking action on the basis of
> information in this e-mail and using or disseminating the information,
> and must notify the sender and delete it from their system. L&T Infotech
> will not accept responsibility or liability for the accuracy or
> completeness of, or the presence of any virus or disabling code in this
> e-mail"
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>