Re: [patch net-next] ipv6: allow userspace to create address with IFLA_F_TEMPORARY flag

[Nicolas Dichtel <nicolas.dichtel@6wind.com>]

Le 29/10/2013 13:40, Hannes Frederic Sowa a écrit :
> On Tue, Oct 29, 2013 at 09:37:06AM -0000, David Laight wrote:
>>> Note that you don't even need to put the DHCP protocol core into the
>>> kernel to fix the promiscuous problem.  You just have to use the
>>> current kernel interfaces correctly.
>>>
>>> It used to be the case a very long time ago that you couldn't even
>>> receive broadcast UDP datagrams on a socket until an address was
>>> configured on it.
>>>
>>> So everyone turns on promiscuous mode and uses RAW sockets or
>>> AF_PACKET.
>>>
>>> Stupid?  yes.
>>
>> Not only that, but the dhcp client could use a normal UDP socket
>> to keep the lease renewed - I suspect it has only ever needed
>> to use the BPF interface (I didn't think it set promiscuous)
>> when acquiring the initial lease.
>
> Yes, this is a very unfortunate situation. From my experience it is not that
> easy to get a patch merged into isc-dhcp.
>
> It seems not that invasive to switch from af_packet to an udp socket with
> SO_BROADCAST set.
If I remember well, another problem is to be able to send these packets with
0.0.0.0 when another IP address is available on the system:

RFC2131
4.1 Constructing and sending DHCP messages
...
    DHCP messages broadcast by a client prior to that client obtaining
    its IP address must have the source address field in the IP header
    set to 0.

We made a patch (never proposed upstream) to add a socket option to keep
this 0.0.0.0 address.
If people are interested, I can try to port it on net-next.

Nicolas