All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>,
	benh@kernel.crashing.org, linuxppc-dev@lists.ozlabs.org,
	linux-kernel@vger.kernel.org
Cc: preeti@linux.vnet.ibm.com, srivatsa.bhat@linux.vnet.ibm.com,
	scottwood@freescale.com, linux-pm@lists.linux-foundation.org
Subject: Re: [PATCH V7 4/7] pseries/cpuidle: Remove MAX_IDLE_STATE macro.
Date: Wed, 06 Nov 2013 22:02:17 +0100	[thread overview]
Message-ID: <527AAE59.9060009@linaro.org> (raw)
In-Reply-To: <20131029110141.31547.23622.stgit@deepthi.in.ibm.com>

On 10/29/2013 12:01 PM, Deepthi Dharwar wrote:
> This patch removes the usage of MAX_IDLE_STATE macro
> and dead code around it. The number of states
> are determined at run time based on the cpuidle
> state table selected on a given platform
>
> Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

> ---
>   drivers/cpuidle/cpuidle-ibm-power.c |   26 +++++++++-----------------
>   1 file changed, 9 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/cpuidle/cpuidle-ibm-power.c b/drivers/cpuidle/cpuidle-ibm-power.c
> index 8c9e42c..e81c207 100644
> --- a/drivers/cpuidle/cpuidle-ibm-power.c
> +++ b/drivers/cpuidle/cpuidle-ibm-power.c
> @@ -25,9 +25,7 @@ struct cpuidle_driver pseries_idle_driver = {
>   	.owner            = THIS_MODULE,
>   };
>
> -#define MAX_IDLE_STATE_COUNT	2
> -
> -static int max_idle_state = MAX_IDLE_STATE_COUNT - 1;
> +static int max_idle_state;
>   static struct cpuidle_state *cpuidle_state_table;
>
>   static inline void idle_loop_prolog(unsigned long *in_purr)
> @@ -137,7 +135,7 @@ static int shared_cede_loop(struct cpuidle_device *dev,
>   /*
>    * States for dedicated partition case.
>    */
> -static struct cpuidle_state dedicated_states[MAX_IDLE_STATE_COUNT] = {
> +static struct cpuidle_state dedicated_states[] = {
>   	{ /* Snooze */
>   		.name = "snooze",
>   		.desc = "snooze",
> @@ -157,7 +155,7 @@ static struct cpuidle_state dedicated_states[MAX_IDLE_STATE_COUNT] = {
>   /*
>    * States for shared partition case.
>    */
> -static struct cpuidle_state shared_states[MAX_IDLE_STATE_COUNT] = {
> +static struct cpuidle_state shared_states[] = {
>   	{ /* Shared Cede */
>   		.name = "Shared Cede",
>   		.desc = "Shared Cede",
> @@ -227,11 +225,7 @@ static int pseries_cpuidle_driver_init(void)
>   	struct cpuidle_driver *drv = &pseries_idle_driver;
>
>   	drv->state_count = 0;
> -
> -	for (idle_state = 0; idle_state < MAX_IDLE_STATE_COUNT; ++idle_state) {
> -
> -		if (idle_state > max_idle_state)
> -			break;
> +	for (idle_state = 0; idle_state < max_idle_state; ++idle_state) {
>
>   		/* is the state not enabled? */
>   		if (cpuidle_state_table[idle_state].enter == NULL)
> @@ -256,16 +250,14 @@ static int pseries_idle_probe(void)
>   	if (cpuidle_disable != IDLE_NO_OVERRIDE)
>   		return -ENODEV;
>
> -	if (max_idle_state == 0) {
> -		printk(KERN_DEBUG "pseries processor idle disabled.\n");
> -		return -EPERM;
> -	}
> -
>   	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
> -		if (lppaca_shared_proc(get_lppaca()))
> +		if (lppaca_shared_proc(get_lppaca())) {
>   			cpuidle_state_table = shared_states;
> -		else
> +			max_idle_state = ARRAY_SIZE(shared_states);
> +		} else {
>   			cpuidle_state_table = dedicated_states;
> +			max_idle_state = ARRAY_SIZE(dedicated_states);
> +		}
>   	} else
>   		return -ENODEV;
>
>


-- 
  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

WARNING: multiple messages have this Message-ID (diff)
From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>,
	benh@kernel.crashing.org, linuxppc-dev@lists.ozlabs.org,
	linux-kernel@vger.kernel.org
Cc: michael@ellerman.id.au, scottwood@freescale.com,
	srivatsa.bhat@linux.vnet.ibm.com, preeti@linux.vnet.ibm.com,
	linux-pm@lists.linux-foundation.org, svaidy@linux.vnet.ibm.com
Subject: Re: [PATCH V7 4/7] pseries/cpuidle: Remove MAX_IDLE_STATE macro.
Date: Wed, 06 Nov 2013 22:02:17 +0100	[thread overview]
Message-ID: <527AAE59.9060009@linaro.org> (raw)
In-Reply-To: <20131029110141.31547.23622.stgit@deepthi.in.ibm.com>

On 10/29/2013 12:01 PM, Deepthi Dharwar wrote:
> This patch removes the usage of MAX_IDLE_STATE macro
> and dead code around it. The number of states
> are determined at run time based on the cpuidle
> state table selected on a given platform
>
> Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

> ---
>   drivers/cpuidle/cpuidle-ibm-power.c |   26 +++++++++-----------------
>   1 file changed, 9 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/cpuidle/cpuidle-ibm-power.c b/drivers/cpuidle/cpuidle-ibm-power.c
> index 8c9e42c..e81c207 100644
> --- a/drivers/cpuidle/cpuidle-ibm-power.c
> +++ b/drivers/cpuidle/cpuidle-ibm-power.c
> @@ -25,9 +25,7 @@ struct cpuidle_driver pseries_idle_driver = {
>   	.owner            = THIS_MODULE,
>   };
>
> -#define MAX_IDLE_STATE_COUNT	2
> -
> -static int max_idle_state = MAX_IDLE_STATE_COUNT - 1;
> +static int max_idle_state;
>   static struct cpuidle_state *cpuidle_state_table;
>
>   static inline void idle_loop_prolog(unsigned long *in_purr)
> @@ -137,7 +135,7 @@ static int shared_cede_loop(struct cpuidle_device *dev,
>   /*
>    * States for dedicated partition case.
>    */
> -static struct cpuidle_state dedicated_states[MAX_IDLE_STATE_COUNT] = {
> +static struct cpuidle_state dedicated_states[] = {
>   	{ /* Snooze */
>   		.name = "snooze",
>   		.desc = "snooze",
> @@ -157,7 +155,7 @@ static struct cpuidle_state dedicated_states[MAX_IDLE_STATE_COUNT] = {
>   /*
>    * States for shared partition case.
>    */
> -static struct cpuidle_state shared_states[MAX_IDLE_STATE_COUNT] = {
> +static struct cpuidle_state shared_states[] = {
>   	{ /* Shared Cede */
>   		.name = "Shared Cede",
>   		.desc = "Shared Cede",
> @@ -227,11 +225,7 @@ static int pseries_cpuidle_driver_init(void)
>   	struct cpuidle_driver *drv = &pseries_idle_driver;
>
>   	drv->state_count = 0;
> -
> -	for (idle_state = 0; idle_state < MAX_IDLE_STATE_COUNT; ++idle_state) {
> -
> -		if (idle_state > max_idle_state)
> -			break;
> +	for (idle_state = 0; idle_state < max_idle_state; ++idle_state) {
>
>   		/* is the state not enabled? */
>   		if (cpuidle_state_table[idle_state].enter == NULL)
> @@ -256,16 +250,14 @@ static int pseries_idle_probe(void)
>   	if (cpuidle_disable != IDLE_NO_OVERRIDE)
>   		return -ENODEV;
>
> -	if (max_idle_state == 0) {
> -		printk(KERN_DEBUG "pseries processor idle disabled.\n");
> -		return -EPERM;
> -	}
> -
>   	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
> -		if (lppaca_shared_proc(get_lppaca()))
> +		if (lppaca_shared_proc(get_lppaca())) {
>   			cpuidle_state_table = shared_states;
> -		else
> +			max_idle_state = ARRAY_SIZE(shared_states);
> +		} else {
>   			cpuidle_state_table = dedicated_states;
> +			max_idle_state = ARRAY_SIZE(dedicated_states);
> +		}
>   	} else
>   		return -ENODEV;
>
>


-- 
  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog


  reply	other threads:[~2013-11-06 21:02 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-29 11:01 [PATCH V7 0/7] POWER/cpuidle: Generic IBM-POWER cpuidle driver enabled for PSERIES and POWERNV platforms Deepthi Dharwar
2013-10-29 11:01 ` Deepthi Dharwar
2013-10-29 11:01 ` [PATCH V7 1/7] pseries/cpuidle: Move processor_idle.c to drivers/cpuidle Deepthi Dharwar
2013-10-29 11:01   ` Deepthi Dharwar
2013-11-06 20:58   ` Daniel Lezcano
2013-11-06 20:58     ` Daniel Lezcano
2013-10-29 11:01 ` [PATCH V7 2/7] pseries/cpuidle: Use cpuidle_register() for initialisation Deepthi Dharwar
2013-10-29 11:01   ` Deepthi Dharwar
2013-11-06 21:00   ` Daniel Lezcano
2013-11-06 21:00     ` Daniel Lezcano
2013-10-29 11:01 ` [PATCH V7 3/7] pseries/cpuidle: Make pseries_idle backend driver a non-module Deepthi Dharwar
2013-10-29 11:01   ` Deepthi Dharwar
2013-11-06 21:01   ` Daniel Lezcano
2013-11-06 21:01     ` Daniel Lezcano
2013-10-29 11:01 ` [PATCH V7 4/7] pseries/cpuidle: Remove MAX_IDLE_STATE macro Deepthi Dharwar
2013-10-29 11:01   ` Deepthi Dharwar
2013-11-06 21:02   ` Daniel Lezcano [this message]
2013-11-06 21:02     ` Daniel Lezcano
2013-10-29 11:01 ` [PATCH V7 5/7] POWER/cpuidle: Generic POWER CPUIDLE driver supporting PSERIES Deepthi Dharwar
2013-10-29 11:01   ` Deepthi Dharwar
2013-11-06 21:05   ` Daniel Lezcano
2013-11-06 21:05     ` Daniel Lezcano
2013-11-07  4:15     ` Deepthi Dharwar
2013-11-07  4:15       ` Deepthi Dharwar
2013-11-07  5:01       ` Benjamin Herrenschmidt
2013-11-07  5:01         ` Benjamin Herrenschmidt
2013-11-07  5:27         ` Deepthi Dharwar
2013-11-07  5:27           ` Deepthi Dharwar
2013-10-29 11:01 ` [PATCH V7 6/7] POWER/cpuidle: Enable powernv cpuidle support Deepthi Dharwar
2013-10-29 11:01   ` Deepthi Dharwar
2013-11-06 21:06   ` Daniel Lezcano
2013-11-06 21:06     ` Daniel Lezcano
2013-10-29 11:02 ` [PATCH V7 7/7] powernv/cpuidle: Enable idle powernv cpu to call into the cpuidle framework Deepthi Dharwar
2013-10-29 11:02   ` Deepthi Dharwar
2013-11-06 21:11   ` Daniel Lezcano
2013-11-06 21:11     ` Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=527AAE59.9060009@linaro.org \
    --to=daniel.lezcano@linaro.org \
    --cc=benh@kernel.crashing.org \
    --cc=deepthi@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@lists.linux-foundation.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=preeti@linux.vnet.ibm.com \
    --cc=scottwood@freescale.com \
    --cc=srivatsa.bhat@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.