From: list-09_linux_arm@tqsc.de (Markus Niebel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: dts: imx53-mba53: create a container for fixed regulators
Date: Thu, 07 Nov 2013 09:50:50 +0100 [thread overview]
Message-ID: <527B546A.8050209@tqsc.de> (raw)
In-Reply-To: <1383724993-3731-1-git-send-email-shawn.guo@linaro.org>
Hello Shawn,
just a little note, not sure what is correct.
Am 06.11.2013 09:03, wrote Shawn Guo:
> To align with others on fixed regulators bindings, it adds node
> 'regulators' as the container and move all regulator-fixed nodes into
> there.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
> arch/arm/boot/dts/imx53-mba53.dts | 32 ++++++++++++++++++--------------
> 1 file changed, 18 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
> index ba95b78..c9ff1a5 100644
> --- a/arch/arm/boot/dts/imx53-mba53.dts
> +++ b/arch/arm/boot/dts/imx53-mba53.dts
> @@ -17,14 +17,6 @@
> model = "TQ MBa53 starter kit";
> compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
>
> - reg_backlight: fixed at 0 {
> - compatible = "regulator-fixed";
> - regulator-name = "lcd-supply";
> - gpio = <&gpio2 5 0>;
> - startup-delay-us = <5000>;
> - enable-active-low;
> - };
> -
> backlight {
> compatible = "pwm-backlight";
> pwms = <&pwm2 0 50000>;
> @@ -43,12 +35,24 @@
> status = "disabled";
> };
>
> - reg_3p2v: 3p2v {
> - compatible = "regulator-fixed";
> - regulator-name = "3P2V";
> - regulator-min-microvolt = <3200000>;
> - regulator-max-microvolt = <3200000>;
> - regulator-always-on;
> + regulators {
> + compatible = "simple-bus";
No need for additional
#address-cells = <1>;
#size-cells = <0>;
here as done in ARM: dts: imx: use generic node name for fixed regulator?
> +
> + reg_backlight: fixed at 0 {
> + compatible = "regulator-fixed";
> + regulator-name = "lcd-supply";
> + gpio = <&gpio2 5 0>;
> + startup-delay-us = <5000>;
> + enable-active-low;
> + };
> +
> + reg_3p2v: 3p2v {
> + compatible = "regulator-fixed";
> + regulator-name = "3P2V";
> + regulator-min-microvolt = <3200000>;
> + regulator-max-microvolt = <3200000>;
> + regulator-always-on;
> + };
> };
>
> sound {
>
Markus
next prev parent reply other threads:[~2013-11-07 8:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-06 8:03 [PATCH 1/2] ARM: dts: imx53-mba53: create a container for fixed regulators Shawn Guo
2013-11-06 8:03 ` [PATCH 2/2] ARM: dts: imx: use generic node name for fixed regulator Shawn Guo
2013-11-07 8:50 ` Markus Niebel [this message]
2013-11-08 8:38 ` [PATCH 1/2] ARM: dts: imx53-mba53: create a container for fixed regulators Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=527B546A.8050209@tqsc.de \
--to=list-09_linux_arm@tqsc.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.