diff for duplicates of <527ED9E5.80800@gmail.com> diff --git a/a/1.txt b/N1/1.txt index 97fb9d9..9cc1a64 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,5 +1,5 @@ On 11/10/2013 01:42 AM, Arnaud Ebalard wrote: -> Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> writes: +> Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> writes: >> On 11/09/2013 09:27 PM, Arnaud Ebalard wrote: >>> All hardware parts of the (mv78230 Armada XP based) NETGEAR ReadyNAS >>> 2120 are supported by mainline kernel (USB 3.0 and eSATA rear ports, @@ -13,7 +13,7 @@ On 11/10/2013 01:42 AM, Arnaud Ebalard wrote: >>> Support for both of those is currently work in progress and does not >>> prevent boot. >>> ->>> Signed-off-by: Arnaud Ebalard <arno@natisbad.org> +>>> Signed-off-by: Arnaud Ebalard <arno-LkuqDEemtHBg9hUCZPvPmw@public.gmane.org> >>> --- >> [...] >>> arch/arm/boot/dts/Makefile | 1 + @@ -34,7 +34,7 @@ On 11/10/2013 01:42 AM, Arnaud Ebalard wrote: > ok, will wait for a decision before resending. I a am not in a hurry. > >>> + ->>> + serial at 12000 { +>>> + serial@12000 { >>> + clock-frequency = <250000000>; >> >> Where does that 250MHz come from? If it is an internal clock @@ -75,7 +75,7 @@ which can be referenced as <&coreclk 0>. >>> + }; >>> + >>> + mdio { ->>> + phy0: ethernet-phy at 0 { +>>> + phy0: ethernet-phy@0 { >>> + reg = <0>; >> >> Can you evaluate PHYs compatible from u-boot or post vendor:prodid @@ -200,9 +200,9 @@ Ah, it is just a name. No need to backport this. >>> + &reset_key_pin>; >>> + pinctrl-names = "default"; >>> + ->>> + button at 1 { +>>> + button@1 { >> ->> Instead of button at n you can name the nodes after their function, +>> Instead of button@n you can name the nodes after their function, >> e.g. power_button, reset_button, ... > > ok, will change that. @@ -211,3 +211,8 @@ Ah, it is just a name. No need to backport this. >> (at least for gpio-keys-polled.txt, there is no gpio-keys.txt); but >> IMHO both "bus-like" structure of gpio_keys and numbering of buttons >> just looks so wrong. + +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index b44d996..0abb569 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,14 +1,29 @@ "ref\087bo1tmibv.fsf@natisbad.org\0" "ref\0527ECBDD.7050607@gmail.com\0" "ref\087hablulxu.fsf@natisbad.org\0" - "From\0sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)\0" - "Subject\0[PATCH] ARM: mvebu: Add Netgear ReadyNAS 2120 board\0" + "ref\087hablulxu.fsf-LkuqDEemtHBg9hUCZPvPmw@public.gmane.org\0" + "From\0Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" + "Subject\0Re: [PATCH] ARM: mvebu: Add Netgear ReadyNAS 2120 board\0" "Date\0Sun, 10 Nov 2013 01:57:09 +0100\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Arnaud Ebalard <arno-LkuqDEemtHBg9hUCZPvPmw@public.gmane.org>\0" + "Cc\0Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>" + Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org> + Gregory Clement <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> + Ezequiel Garcia <ezequiel.garcia-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> + Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> + Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org> + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> + Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org> + Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org> + Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> + Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org> + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + " Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>\0" "\00:1\0" "b\0" "On 11/10/2013 01:42 AM, Arnaud Ebalard wrote:\n" - "> Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> writes:\n" + "> Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> writes:\n" ">> On 11/09/2013 09:27 PM, Arnaud Ebalard wrote:\n" ">>> All hardware parts of the (mv78230 Armada XP based) NETGEAR ReadyNAS\n" ">>> 2120 are supported by mainline kernel (USB 3.0 and eSATA rear ports,\n" @@ -22,7 +37,7 @@ ">>> Support for both of those is currently work in progress and does not\n" ">>> prevent boot.\n" ">>>\n" - ">>> Signed-off-by: Arnaud Ebalard <arno@natisbad.org>\n" + ">>> Signed-off-by: Arnaud Ebalard <arno-LkuqDEemtHBg9hUCZPvPmw@public.gmane.org>\n" ">>> ---\n" ">> [...]\n" ">>> arch/arm/boot/dts/Makefile | 1 +\n" @@ -43,7 +58,7 @@ "> ok, will wait for a decision before resending. I a am not in a hurry.\n" ">\n" ">>> +\n" - ">>> +\t\t\tserial at 12000 {\n" + ">>> +\t\t\tserial@12000 {\n" ">>> +\t\t\t\tclock-frequency = <250000000>;\n" ">>\n" ">> Where does that 250MHz come from? If it is an internal clock\n" @@ -84,7 +99,7 @@ ">>> +\t\t\t};\n" ">>> +\n" ">>> +\t\t\tmdio {\n" - ">>> +\t\t\t\tphy0: ethernet-phy at 0 {\n" + ">>> +\t\t\t\tphy0: ethernet-phy@0 {\n" ">>> +\t\t\t\t\treg = <0>;\n" ">>\n" ">> Can you evaluate PHYs compatible from u-boot or post vendor:prodid\n" @@ -209,9 +224,9 @@ ">>> +\t\t\t &reset_key_pin>;\n" ">>> +\t\tpinctrl-names = \"default\";\n" ">>> +\n" - ">>> +\t\tbutton at 1 {\n" + ">>> +\t\tbutton@1 {\n" ">>\n" - ">> Instead of button at n you can name the nodes after their function,\n" + ">> Instead of button@n you can name the nodes after their function,\n" ">> e.g. power_button, reset_button, ...\n" ">\n" "> ok, will change that.\n" @@ -219,6 +234,11 @@ ">> I know both comments above are in the current binding documentation\n" ">> (at least for gpio-keys-polled.txt, there is no gpio-keys.txt); but\n" ">> IMHO both \"bus-like\" structure of gpio_keys and numbering of buttons\n" - >> just looks so wrong. + ">> just looks so wrong.\n" + "\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -bf454fe565430ce1ea78616106964d01998c1282de00e313747b867ce5740e79 +ee5f49ee99b23d61d87755a966275259a2341d59e9d566afcc96e33d061062a5
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.