From: Hans Verkuil <hverkuil@xs4all.nl>
To: Andy Walls <awalls@md.metrocast.net>
Cc: Antti Palosaari <crope@iki.fi>, linux-media@vger.kernel.org
Subject: Re: [PATCH RFC] libv4lconvert: SDR conversion from U8 to FLOAT
Date: Mon, 11 Nov 2013 15:38:12 +0100 [thread overview]
Message-ID: <5280EBD4.5010505@xs4all.nl> (raw)
In-Reply-To: <1384179541.1949.24.camel@palomino.walls.org>
On 11/11/2013 03:19 PM, Andy Walls wrote:
> On Sun, 2013-11-10 at 19:16 +0200, Antti Palosaari wrote:
>> Convert unsigned 8 to float 32 [-1 to +1], which is commonly
>> used format for baseband signals.
>
> Hi Annti,
>
> I don't think this a good idea. Floating point representations are
> inherently non-portable. Even though most everything now uses IEEE-754
> representation, things like denormaliazed numbers may be treated
> differently by different machines. If someone saves the data to a file,
> endianess issues aside, there are no guarantees that a different machine
> reading is going to interpret all the floating point data from that file
> properly.
>
> I really would recommend staying with scaled integer representations or
> explicit integer mantissa, exponent representations.
For what it's worth: ALSA does support float format as well (both LE and BE).
Regards,
Hans
>
> Two more comments below...
>
>> Signed-off-by: Antti Palosaari <crope@iki.fi>
>> ---
>> contrib/freebsd/include/linux/videodev2.h | 4 ++++
>> include/linux/videodev2.h | 4 ++++
>> lib/libv4lconvert/libv4lconvert.c | 29 ++++++++++++++++++++++++++++-
>> 3 files changed, 36 insertions(+), 1 deletion(-)
>>
>> diff --git a/contrib/freebsd/include/linux/videodev2.h b/contrib/freebsd/include/linux/videodev2.h
>> index 1fcfaeb..8829400 100644
>> --- a/contrib/freebsd/include/linux/videodev2.h
>> +++ b/contrib/freebsd/include/linux/videodev2.h
>> @@ -465,6 +465,10 @@ struct v4l2_pix_format {
>> #define V4L2_PIX_FMT_SE401 v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
>> #define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
>>
>> +/* SDR */
>> +#define V4L2_PIX_FMT_FLOAT v4l2_fourcc('D', 'F', '3', '2') /* float 32-bit */
>> +#define V4L2_PIX_FMT_U8 v4l2_fourcc('D', 'U', '0', '8') /* unsigned 8-bit */
>> +
>> /*
>> * F O R M A T E N U M E R A T I O N
>> */
>> diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
>> index 437f1b0..14299a6 100644
>> --- a/include/linux/videodev2.h
>> +++ b/include/linux/videodev2.h
>> @@ -431,6 +431,10 @@ struct v4l2_pix_format {
>> #define V4L2_PIX_FMT_SE401 v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
>> #define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
>>
>> +/* SDR */
>> +#define V4L2_PIX_FMT_FLOAT v4l2_fourcc('D', 'F', '3', '2') /* float 32-bit */
>> +#define V4L2_PIX_FMT_U8 v4l2_fourcc('D', 'U', '0', '8') /* unsigned 8-bit */
>> +
>> /*
>> * F O R M A T E N U M E R A T I O N
>> */
>> diff --git a/lib/libv4lconvert/libv4lconvert.c b/lib/libv4lconvert/libv4lconvert.c
>> index e2afc27..38c9125 100644
>> --- a/lib/libv4lconvert/libv4lconvert.c
>> +++ b/lib/libv4lconvert/libv4lconvert.c
>> @@ -78,7 +78,8 @@ static void v4lconvert_get_framesizes(struct v4lconvert_data *data,
>> { V4L2_PIX_FMT_RGB24, 24, 1, 5, 0 }, \
>> { V4L2_PIX_FMT_BGR24, 24, 1, 5, 0 }, \
>> { V4L2_PIX_FMT_YUV420, 12, 6, 1, 0 }, \
>> - { V4L2_PIX_FMT_YVU420, 12, 6, 1, 0 }
>> + { V4L2_PIX_FMT_YVU420, 12, 6, 1, 0 }, \
>> + { V4L2_PIX_FMT_FLOAT, 0, 0, 0, 0 }
>>
>> static const struct v4lconvert_pixfmt supported_src_pixfmts[] = {
>> SUPPORTED_DST_PIXFMTS,
>> @@ -131,6 +132,8 @@ static const struct v4lconvert_pixfmt supported_src_pixfmts[] = {
>> { V4L2_PIX_FMT_Y6, 8, 20, 20, 0 },
>> { V4L2_PIX_FMT_Y10BPACK, 10, 20, 20, 0 },
>> { V4L2_PIX_FMT_Y16, 16, 20, 20, 0 },
>> + /* SDR formats */
>> + { V4L2_PIX_FMT_U8, 0, 0, 0, 0 },
>> };
>>
>> static const struct v4lconvert_pixfmt supported_dst_pixfmts[] = {
>> @@ -1281,6 +1284,25 @@ static int v4lconvert_convert_pixfmt(struct v4lconvert_data *data,
>> }
>> break;
>>
>> + /* SDR */
>> + case V4L2_PIX_FMT_U8:
>> + switch (dest_pix_fmt) {
>> + case V4L2_PIX_FMT_FLOAT:
>> + {
>> + /* 8-bit unsigned to 32-bit float */
>> + unsigned int i;
>> + float ftmp;
>> + for (i = 0; i < src_size; i++) {
>> + ftmp = *src++;
>> + ftmp -= 127.5;
>> + ftmp /= 127.5;
>> + memcpy(dest, &ftmp, 4);
>> + dest += 4;
>
> Replace the 4's with sizeof(float).
>
> You have no guarantees that sizeof(float) == 4, but it is usally a safe
> assumption for 'float' on Unix.
>
> sizeof(long double) is certainly different for IA32 machines (80 bits)
> vs. other 32 bit platforms. I was burned by this many years ago on a
> RedHat 9.0 machine (the GNU Ada Translator's libm bindings made some bad
> assumptions about the size of float types).
>
>
>> + }
>> + }
>> + }
>> + break;
>> +
>> default:
>> V4LCONVERT_ERR("Unknown src format in conversion\n");
>> errno = EINVAL;
>> @@ -1349,6 +1371,11 @@ int v4lconvert_convert(struct v4lconvert_data *data,
>> temp_needed =
>> my_src_fmt.fmt.pix.width * my_src_fmt.fmt.pix.height * 3 / 2;
>> break;
>> + /* SDR */
>> + case V4L2_PIX_FMT_FLOAT:
>> + dest_needed = src_size * 4; /* 8-bit to 32-bit */
>
> Change the 4 to sizeof(float).
>
>> + temp_needed = dest_needed;
>> + break;
>> default:
>> V4LCONVERT_ERR("Unknown dest format in conversion\n");
>> errno = EINVAL;
>
> Regards,
> Andy
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2013-11-11 14:38 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-10 17:16 [PATCH RFC] libv4lconvert: SDR conversion from U8 to FLOAT Antti Palosaari
2013-11-11 13:14 ` Hans Verkuil
2013-11-11 13:40 ` Antti Palosaari
2013-11-11 13:52 ` Hans Verkuil
2013-11-15 19:11 ` Antti Palosaari
2013-11-15 19:13 ` Devin Heitmueller
2013-11-15 19:17 ` Antti Palosaari
2013-11-16 14:11 ` Antti Palosaari
2013-11-16 17:28 ` Hans de Goede
2013-11-11 14:19 ` Andy Walls
2013-11-11 14:38 ` Hans Verkuil [this message]
2013-11-14 13:45 ` Antti Palosaari
2013-11-14 13:50 ` Hans Verkuil
2013-11-18 17:43 ` Antti Palosaari
2013-11-16 17:27 ` Hans de Goede
2013-11-16 17:34 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5280EBD4.5010505@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=awalls@md.metrocast.net \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.