diff for duplicates of <52813F25.40703@gmail.com> diff --git a/a/1.txt b/N1/1.txt index f235916..d63d6b7 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -11,7 +11,7 @@ On 11/11/2013 09:01 PM, Arnaud Ebalard wrote: > Support for both of those is currently work in progress and does not > prevent boot. > -> Signed-off-by: Arnaud Ebalard <arno@natisbad.org> +> Signed-off-by: Arnaud Ebalard <arno-LkuqDEemtHBg9hUCZPvPmw@public.gmane.org> > --- [...] > diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -23,7 +23,7 @@ On 11/11/2013 09:01 PM, Arnaud Ebalard wrote: > +/* > + * Device Tree file for NETGEAR ReadyNAS 2120 > + * -> + * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> +> + * Copyright (C) 2013, Arnaud EBALARD <arno-LkuqDEemtHBg9hUCZPvPmw@public.gmane.org> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License @@ -53,7 +53,7 @@ nit: order includes global before local, i.e. {gpio,input}.h before .dtsi > + }; > + [...] -> + serial at 12000 { +> + serial@12000 { > + clocks = <&coreclk 0>; > + status = "okay"; > + }; @@ -69,42 +69,42 @@ uart0: { status = "okay" }; without replaying node hierarchy over and over again. > + mdio { -> + phy0: ethernet-phy at 0 { +> + phy0: ethernet-phy@0 { > + compatible = "marvell,88e1318s"; > + reg = <0>; > + }; > + -> + phy1: ethernet-phy at 1 { +> + phy1: ethernet-phy@1 { > + compatible = "marvell,88e1318s"; > + reg = <1>; > + }; > + }; > + -> + ethernet at 70000 { +> + ethernet@70000 { > + status = "okay"; > + phy = <&phy0>; > + phy-mode = "rgmii-id"; > + }; > + -> + ethernet at 74000 { +> + ethernet@74000 { > + status = "okay"; > + phy = <&phy1>; > + phy-mode = "rgmii-id"; > + }; > + > + /* Front USB 2.0 port */ -> + usb at 50000 { +> + usb@50000 { > + status = "okay"; > + }; > + -> + i2c at 11000 { +> + i2c@11000 { > + compatible = "marvell,mv78230-i2c"; > + clock-frequency = <400000>; > + status = "okay"; > + > + /* Controller for rear fan #1 of 3 (Protechnic > + * MGT4012XB-O20, 8000RPM) near eSATA port */ -> + g762_fan1: g762 at 3e { +> + g762_fan1: g762@3e { > + compatible = "gmt,g762"; > + reg = <0x3e>; > + clocks = <&g762_clk>; /* input clock */ @@ -119,7 +119,7 @@ e.g. gmt,fan-hear-mode. Depends on your g762 binding review. > + }; > + > + /* Controller for rear (center) fan #2 of 3 */ -> + g762_fan2: g762 at 48 { +> + g762_fan2: g762@48 { > + compatible = "gmt,g762"; > + reg = <0x48>; > + clocks = <&g762_clk>; /* input clock */ @@ -129,7 +129,7 @@ e.g. gmt,fan-hear-mode. Depends on your g762 binding review. > + }; > + > + /* Controller for rear fan #3 of 3 */ -> + g762_fan3: g762 at 49 { +> + g762_fan3: g762@49 { > + compatible = "gmt,g762"; > + reg = <0x49>; > + clocks = <&g762_clk>; /* input clock */ @@ -139,7 +139,7 @@ e.g. gmt,fan-hear-mode. Depends on your g762 binding review. > + }; > + > + /* Temperature sensor */ -> + g751: g751 at 4c { +> + g751: g751@4c { > + compatible = "gmt,g751"; > + reg = <0x4c>; > + }; @@ -225,7 +225,7 @@ ditto. Besides the nits, -Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> +Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > + compatible = "gpio-poweroff"; > + pinctrl-0 = <&poweroff>; @@ -234,3 +234,8 @@ Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > + }; > +}; > + +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index a604ca5..3287dcf 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,8 +1,23 @@ "ref\087bo1qhfnf.fsf@natisbad.org\0" - "From\0sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)\0" - "Subject\0[PATCHv2] ARM: mvebu: Add Netgear ReadyNAS 2120 board\0" + "ref\087bo1qhfnf.fsf-LkuqDEemtHBg9hUCZPvPmw@public.gmane.org\0" + "From\0Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" + "Subject\0Re: [PATCHv2] ARM: mvebu: Add Netgear ReadyNAS 2120 board\0" "Date\0Mon, 11 Nov 2013 21:33:41 +0100\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Arnaud Ebalard <arno-LkuqDEemtHBg9hUCZPvPmw@public.gmane.org>" + Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org> + Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org> + Gregory Clement <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> + Ezequiel Garcia <ezequiel.garcia-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> + " Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\0" + "Cc\0Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>" + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> + Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org> + Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org> + Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> + Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org> + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + " Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>\0" "\00:1\0" "b\0" "On 11/11/2013 09:01 PM, Arnaud Ebalard wrote:\n" @@ -18,7 +33,7 @@ "> Support for both of those is currently work in progress and does not\n" "> prevent boot.\n" ">\n" - "> Signed-off-by: Arnaud Ebalard <arno@natisbad.org>\n" + "> Signed-off-by: Arnaud Ebalard <arno-LkuqDEemtHBg9hUCZPvPmw@public.gmane.org>\n" "> ---\n" "[...]\n" "> diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts\n" @@ -30,7 +45,7 @@ "> +/*\n" "> + * Device Tree file for NETGEAR ReadyNAS 2120\n" "> + *\n" - "> + * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>\n" + "> + * Copyright (C) 2013, Arnaud EBALARD <arno-LkuqDEemtHBg9hUCZPvPmw@public.gmane.org>\n" "> + *\n" "> + * This program is free software; you can redistribute it and/or\n" "> + * modify it under the terms of the GNU General Public License\n" @@ -60,7 +75,7 @@ "> +\t};\n" "> +\n" "[...]\n" - "> +\t\t\tserial at 12000 {\n" + "> +\t\t\tserial@12000 {\n" "> +\t\t\t\tclocks = <&coreclk 0>;\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t};\n" @@ -76,42 +91,42 @@ "without replaying node hierarchy over and over again.\n" "\n" "> +\t\t\tmdio {\n" - "> +\t\t\t\tphy0: ethernet-phy at 0 {\n" + "> +\t\t\t\tphy0: ethernet-phy@0 {\n" "> +\t\t\t\t\tcompatible = \"marvell,88e1318s\";\n" "> +\t\t\t\t\treg = <0>;\n" "> +\t\t\t\t};\n" "> +\n" - "> +\t\t\t\tphy1: ethernet-phy at 1 {\n" + "> +\t\t\t\tphy1: ethernet-phy@1 {\n" "> +\t\t\t\t\tcompatible = \"marvell,88e1318s\";\n" "> +\t\t\t\t\treg = <1>;\n" "> +\t\t\t\t};\n" "> +\t\t\t};\n" "> +\n" - "> +\t\t\tethernet at 70000 {\n" + "> +\t\t\tethernet@70000 {\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t\tphy = <&phy0>;\n" "> +\t\t\t\tphy-mode = \"rgmii-id\";\n" "> +\t\t\t};\n" "> +\n" - "> +\t\t\tethernet at 74000 {\n" + "> +\t\t\tethernet@74000 {\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t\tphy = <&phy1>;\n" "> +\t\t\t\tphy-mode = \"rgmii-id\";\n" "> +\t\t\t};\n" "> +\n" "> +\t\t\t/* Front USB 2.0 port */\n" - "> +\t\t\tusb at 50000 {\n" + "> +\t\t\tusb@50000 {\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t};\n" "> +\n" - "> +\t\t\ti2c at 11000 {\n" + "> +\t\t\ti2c@11000 {\n" "> +\t\t\t\tcompatible = \"marvell,mv78230-i2c\";\n" "> +\t\t\t\tclock-frequency = <400000>;\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\n" "> +\t\t\t\t/* Controller for rear fan #1 of 3 (Protechnic\n" "> +\t\t\t\t * MGT4012XB-O20, 8000RPM) near eSATA port */\n" - "> +\t\t\t\tg762_fan1: g762 at 3e {\n" + "> +\t\t\t\tg762_fan1: g762@3e {\n" "> +\t\t\t\t\tcompatible = \"gmt,g762\";\n" "> +\t\t\t\t\treg = <0x3e>;\n" "> +\t\t\t\t\tclocks = <&g762_clk>; /* input clock */\n" @@ -126,7 +141,7 @@ "> +\t\t\t\t};\n" "> +\n" "> +\t\t\t\t/* Controller for rear (center) fan #2 of 3 */\n" - "> +\t\t\t\tg762_fan2: g762 at 48 {\n" + "> +\t\t\t\tg762_fan2: g762@48 {\n" "> +\t\t\t\t\tcompatible = \"gmt,g762\";\n" "> +\t\t\t\t\treg = <0x48>;\n" "> +\t\t\t\t\tclocks = <&g762_clk>; /* input clock */\n" @@ -136,7 +151,7 @@ "> +\t\t\t\t};\n" "> +\n" "> +\t\t\t\t/* Controller for rear fan #3 of 3 */\n" - "> +\t\t\t\tg762_fan3: g762 at 49 {\n" + "> +\t\t\t\tg762_fan3: g762@49 {\n" "> +\t\t\t\t\tcompatible = \"gmt,g762\";\n" "> +\t\t\t\t\treg = <0x49>;\n" "> +\t\t\t\t\tclocks = <&g762_clk>; /* input clock */\n" @@ -146,7 +161,7 @@ "> +\t\t\t\t};\n" "> +\n" "> +\t\t\t\t/* Temperature sensor */\n" - "> +\t\t\t\tg751: g751 at 4c {\n" + "> +\t\t\t\tg751: g751@4c {\n" "> +\t\t\t\t\tcompatible = \"gmt,g751\";\n" "> +\t\t\t\t\treg = <0x4c>;\n" "> +\t\t\t\t};\n" @@ -232,7 +247,7 @@ "\n" "Besides the nits,\n" "\n" - "Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>\n" + "Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "\n" "> +\t\tcompatible = \"gpio-poweroff\";\n" "> +\t\tpinctrl-0 = <&poweroff>;\n" @@ -240,6 +255,11 @@ "> +\t\tgpios = <&gpio1 10 GPIO_ACTIVE_LOW>;\n" "> +\t};\n" "> +};\n" - > + ">\n" + "\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -6807d49b7c8a2b7f42c1d226f13d49139f57a5cbd1fdfe644fe309c0edafac8a +ac6f86f2e674cfa2af00d7f2d03dca14db3a5f495024d1467a956dd56baa6778
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.