From mboxrd@z Thu Jan  1 00:00:00 1970
From: Guenter Roeck <linux@roeck-us.net>
Date: Tue, 12 Nov 2013 14:23:39 +0000
Subject: Re: [lm-sensors] Nuvoton NCT6791D support
Message-Id: <528239EB.3010100@roeck-us.net>
List-Id: <lm-sensors.vger.kernel.org>
References: <CADkjvt_edGO-+NKbsUbNwN=DXod10WTUYmfjRTrQfYq_2no2uw@mail.gmail.com>
In-Reply-To: <CADkjvt_edGO-+NKbsUbNwN=DXod10WTUYmfjRTrQfYq_2no2uw@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lm-sensors@vger.kernel.org

On 11/11/2013 11:14 PM, Jean Delvare wrote:
> On Mon, 11 Nov 2013 22:25:04 -0800, p. stephen w wrote:
>> Running sensors gives:
>> nct6791-isa-0290
>>
>> Based on that the command becomes:
>> Mint stephen # isadump -k 0x55,0x55 0x905 0x906
>>
>> Which outputs:
>>       0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
>> 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>
>>
>>
>> If that's correct, I'll go a head and run the rest of them.
>
> No it's not correct, base address 0x290 leads to the following command:
>
> # isadump -k 0x55,0x55 0x295 0x296
>
> As a side note, Guenter, I'd be very surprised if you actually need the
> -k here, all Super-I/O chips I saw so far needed a key to access the
> configuration space only, not the logical device I/O areas.
>

You are right - I copied the command from somewhere else and didn't try without,
nor really think about it. "isadump 0x295 0x296" should work as well.

Thanks,
Guenter


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors