From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/4] mx6: add structs for mmdc and ddr iomux registers
Date: Tue, 12 Nov 2013 16:12:20 +0100 [thread overview]
Message-ID: <52824554.3060409@denx.de> (raw)
In-Reply-To: <1383903325.3157.493.camel@edward-x220-laptop>
Hi Edward,
On 08/11/2013 10:35, Edward Lin wrote:
> Signed-off-by: Edward Lin <edward.lin@technexion.com>
> ---
> arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h | 167
> +++++++++++++++++++++++++++
> 1 file changed, 167 insertions(+)
> create mode 100644 arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h
>
> diff --git a/arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h
> b/arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h
> new file mode 100644
> index 0000000..dd5e892
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h
> @@ -0,0 +1,167 @@
> +/*
> + * Copyright (C) 2013 TechNexion Inc.
> + *
> + * Author: Edward Lin <edward.lin@technexion.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +#ifndef __ASM_ARCH_MX6_DDR_REGS_H__
> +#define __ASM_ARCH_MX6_DDR_REGS_H__
> +
> +#define MX6_MMDC_P0_BASE 0x021b0000
> +#define MX6_MMDC_P1_BASE 0x021b4000
> +
> +/* MMDC P0/P1 Registers */
> +struct mmdc_p_regs {
> + u32 mdctl;
> + u32 mdpdc;
> + u32 mdotc;
> + u32 mdcfg0;
> + u32 mdcfg1;
> + u32 mdcfg2;
> + u32 mdmisc;
Ok - if these structure is to make it available for other components, it
should replace the structure esd_mmdc_regs in cpu.c. We cannot have both.
> + u32 res10[25];
> + u32 mpmur0;
> +}__attribute__((packed, aligned(4)));
> +
I am missing why the packed is needed.
> +#define MX6Q_IOM_DDR_BASE 0x020e0500
> +struct mx6q_iomux_ddr_regs {
> + u32 res1[3];
> + u32 dram_sdqs5;
> + u32 dram_dqm5;
> + u32 dram_dqm4;
> + u32 dram_sdqs4;
> + u32 dram_sdqs3;
> + u32 dram_dqm3;
> + u32 dram_sdqs2;
> + u32 dram_dqm2;
> + u32 res2[16];
> + u32 dram_cas;
> + u32 res3[2];
> + u32 dram_ras;
> + u32 dram_reset;
> + u32 res4[2];
> + u32 dram_sdclk_0;
> + u32 dram_sdba2;
> + u32 dram_sdcke0;
> + u32 dram_sdclk_1;
> + u32 dram_sdcke1;
> + u32 dram_sdodt0;
> + u32 dram_sdodt1;
> + u32 res5;
> + u32 dram_sdqs0;
> + u32 dram_dqm0;
> + u32 dram_sdqs1;
> + u32 dram_dqm1;
> + u32 dram_sdqs6;
> + u32 dram_dqm6;
> + u32 dram_sdqs7;
> + u32 dram_dqm7;
> +}__attribute__((packed, aligned(4)));
> +
> +#define MX6Q_IOM_GRP_BASE 0x020e0700
> +struct mx6q_iomux_grp_regs {
> + u32 res1[18];
> + u32 grp_b7ds;
> + u32 grp_addds;
> + u32 grp_ddrmode_ctl;
> + u32 res2;
> + u32 grp_ddrpke;
> + u32 res3[6];
> + u32 grp_ddrmode;
> + u32 res4[3];
> + u32 grp_b0ds;
> + u32 grp_b1ds;
> + u32 grp_ctlds;
> + u32 res5;
> + u32 grp_b2ds;
> + u32 grp_ddr_type;
> + u32 grp_b3ds;
> + u32 grp_b4ds;
> + u32 grp_b5ds;
> + u32 grp_b6ds;
> +}__attribute__((packed, aligned(4)));
> +
> +#define MX6DL_IOM_DDR_BASE 0x020e0400
> +struct mx6dl_iomux_ddr_regs {
> + u32 res1[25];
> + u32 dram_cas;
> + u32 res2[2];
> + u32 dram_dqm0;
> + u32 dram_dqm1;
> + u32 dram_dqm2;
> + u32 dram_dqm3;
> + u32 dram_dqm4;
> + u32 dram_dqm5;
> + u32 dram_dqm6;
> + u32 dram_dqm7;
> + u32 dram_ras;
> + u32 dram_reset;
> + u32 res3[2];
> + u32 dram_sdba2;
> + u32 dram_sdcke0;
> + u32 dram_sdcke1;
> + u32 dram_sdclk_0;
> + u32 dram_sdclk_1;
> + u32 dram_sdodt0;
> + u32 dram_sdodt1;
> + u32 dram_sdqs0;
> + u32 dram_sdqs1;
> + u32 dram_sdqs2;
> + u32 dram_sdqs3;
> + u32 dram_sdqs4;
> + u32 dram_sdqs5;
> + u32 dram_sdqs6;
> + u32 dram_sdqs7;
> +}__attribute__((packed, aligned(4)));
> +
> +#define MX6DL_IOM_GRP_BASE 0x020e0700
> +struct mx6dl_iomux_grp_regs {
> + u32 res1[18];
> + u32 grp_b7ds;
> + u32 grp_addds;
> + u32 grp_ddrmode_ctl;
> + u32 grp_ddrpke;
> + u32 res2[2];
> + u32 grp_ddrmode;
> + u32 grp_b0ds;
> + u32 res3;
> + u32 grp_ctlds;
> + u32 grp_b1ds;
> + u32 grp_ddr_type;
> + u32 grp_b2ds;
> + u32 grp_b3ds;
> + u32 grp_b4ds;
> + u32 grp_b5ds;
> + u32 res4;
> + u32 grp_b6ds;
> +}__attribute__((packed, aligned(4)));
> +
> +#endif
>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2013-11-12 15:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1383902865.3157.485.camel@edward-x220-laptop>
2013-11-08 9:35 ` [U-Boot] [PATCH 2/4] mx6: add structs for mmdc and ddr iomux registers Edward Lin
2013-11-08 23:42 ` Eric Nelson
2013-11-12 9:55 ` Edward Lin
2013-11-12 15:12 ` Stefano Babic [this message]
2013-11-13 5:50 ` Tapani
2013-11-13 8:52 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52824554.3060409@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.