From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Wed, 13 Nov 2013 05:10:05 +0000 Subject: Re: [lm-sensors] Nuvoton NCT6791D support Message-Id: <528309AD.50609@roeck-us.net> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On 11/12/2013 08:38 PM, p. stephen w wrote: > no, I only deleted the nct6775 folder I used to clone the repo into. > I can remove it, and run through the install again. > > Hi, That is not what I meant. To load the new version of the module, you need to unload the old version first, using "modprobe -r". Just installing the new version of a module doesn't unload the old one. Thanks, Guenter > On Tue, Nov 12, 2013 at 8:29 PM, Guenter Roeck > wrote: > > On Tue, Nov 12, 2013 at 08:07:09PM -0800, p. stephen w wrote: > > Please see attached. > > _______________________________________ > > The attached shows all the commands and their output as I ran through them. > > > > Let me know if I missed something, or more info is needed. > > > Puzzled. Did you unload the old driver with "modprobe -r nct6775" before reloading it ? > > Thanks, > Guenter > > > > > -- > > > _____________________________ > Stephen Wille | pstephenwille.com > /new address p.stephenwille@gmail.com / _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors