From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Priebe - Profihost AG Subject: Re: how to mix bridges and bonding inc. vlans correctly on Kernel > 3.10 Date: Wed, 13 Nov 2013 15:20:56 +0100 Message-ID: <52838AC8.8070005@profihost.ag> References: <52838590.5070806@profihost.ag> <20131113141244.GM19702@redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: Linux Netdev List To: Veaceslav Falico Return-path: Received: from mail-ph.de-nserver.de ([85.158.179.214]:51712 "EHLO mail-ph.de-nserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757359Ab3KMOVE (ORCPT ); Wed, 13 Nov 2013 09:21:04 -0500 In-Reply-To: <20131113141244.GM19702@redhat.com> Sender: netdev-owner@vger.kernel.org List-ID: Hi Falico, Am 13.11.2013 15:12, schrieb Veaceslav Falico: > On Wed, Nov 13, 2013 at 02:58:40PM +0100, Stefan Priebe - Profihost AG > wrote: >> Hello, >> >> while my vlans, bridging and bonding stuff was working until 3.9 i never >> thought about how it is right. So maybe i was always wrong. >> >> I've this: >> >> eth2 >> \ >> -- bond1 -- vmbr1 >> / >> eth3 >> >> This works fine and as expected now i want to have a vlan using the >> bonding and using a bridge. >> >> I the past i had this: >> eth2 >> \ >> -- bond1 -- vmbr1 >> / \ >> eth3 \ vmbr1.3000 >> \ ---- tap114i1 >> >> This was working fine until 3.9.X since 3.10. Right now using 3.10 i >> need to put eth2 and eth3 into promisc mode to get it working ;-( this >> is bad! > > As a guess - do you use arp monitoring for bonding? Try using miimon - > there were some issues with it in 3.10, which were fixed by some huge > patchsets that will never hit 3.10 stable. > Also, the bonding configuration would be welcome. Debian Bonding konfiguration looks like this: auto bond1 iface bond1 inet manual slaves eth2 eth3 bond-mode 802.3ad bond_miimon 100 bond_updelay 200 bond_downdelay 0 This should be miimon using lacp and not arp isn't it? Anything more needed? One thing i forgot the one with vmbr1.3000 does not work at all eben not with promisc mode. The one below works fine if i set eth2 and eth3 into promisc mode. Stefan >> I also tried this one without success: >> eth2 >> \ >> -- bond1 -- vmbr1 >> / \ >> eth3 ----- bond1.3000 --- vmbr1v3000 >> \ ---- tap114i1 >> >> >> >> Greets, >> Stefan >> -- >> To unsubscribe from this list: send the line "unsubscribe netdev" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html